Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Edgewood, WA
Dalton Heating & Air handles the full range of heating and cooling work in Edgewood, from furnace repairs on older split-level homes to full heat pump installations in newer developments off Meridian. Most Edgewood jobs land on older residential systems running harder against the Plateau’s damp winters and dry summer stretches. If your heat is out or your AC won’t hold temperature, call (361) 306-9515 and you’ll get a live person, a straight answer, and a price in writing before any work begins.
Why Edgewood Homes Are Different
Edgewood sits on the high ground east of Tacoma, and that elevation shapes how HVAC systems behave. Homes here catch more wind exposure than lower-lying Pierce County neighborhoods, and winter temperatures run a few degrees colder than in the valley. We regularly see heat pumps in Edgewood that were undersized for the home’s actual heating load, which means the auxiliary heat strips run constantly from November through February and electric bills climb with it. That’s a sizing issue, not a brand issue, and it’s very fixable.
The housing stock matters too. Much of Edgewood was built during the 1970s through 1990s construction boom, which gives us a lot of split-level homes with furnace closets in the hallway and AC condensers tucked around the side of the garage. Those layouts are workable, but they demand a technician who knows how to navigate tight mechanical spaces without cutting into drywall unnecessarily. Newer pockets like Edgemont and the neighborhoods around Mountain View have different profiles: heat pumps, higher-efficiency furnaces, and ductwork that’s still settling. Duct leaks in first-year homes aren’t uncommon, and we find them with combustion testing and static pressure readings, not guesswork.
Permitting in Edgewood goes through the city’s own building department, not Pierce County, which catches some out-of-town contractors off guard. We handle the paperwork and coordinate inspections on furnace swaps and heat pump installations so the job closes out clean. That’s just part of doing an Edgewood job by the book.
Our Main Edgewood Services
Edgewood homeowners call us most about two things: a furnace that won’t fire on a cold morning, and a heat pump or AC system that stops holding temperature mid-summer. Each service gets its own detailed Edgewood page below.
AC Repair in Edgewood
When an air conditioner fails in Edgewood, the failure usually traces to one of three things: a capacitor that’s out of spec after years of hard summer starts, a refrigerant charge that’s low enough to ice the evaporator coil, or a condenser fan motor that’s seized from debris buildup. We diagnose all of it on site, put the repair price in writing before any wrench turns, and cover the fix with a full-year written guarantee. If the same repair fails within 365 days, we return at no charge. Read the full breakdown on our AC Repair in Edgewood page.
Heat Pump Installation in Edgewood
Edgewood’s climate is a strong argument for a properly sized heat pump. We don’t sell units off a rule-of-thumb guess; every installation starts with a room-by-room load calculation using the home’s actual square footage, window orientation, and insulation levels. That matters on the Plateau, where east-facing sloped lots get hit with morning sun and afternoon shade in ways that throw off generic sizing charts. We install Trane, Lennox, and Rheem heat pumps, among others, and every job comes with a set install date and a written fixed price. See Heat Pump Installation in Edgewood for full details and pricing.
Furnace Repair in Edgewood
A furnace that won’t run in Edgewood in January is a cold-house emergency, and we treat it that way. Most burner failures, cracked igniters, and pressure-switch faults we see in Edgewood homes trace back to systems that haven’t been inspected in years, not catastrophic mechanical failure. The good news: most furnace repairs run under $450 in parts and labor, and we stock igniters, flame sensors, pressure switches, and control boards for Goodman, Trane, Lennox, and Rheem units. If we can’t complete the repair same-day because a part is unusual, we tell you upfront and set a return window in writing. Details on Furnace Repair in Edgewood.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Edgewood
Our technicians carry parts for Trane, Lennox, Goodman, and Rheem systems, which covers a large share of the equipment installed across Edgewood. Common boards, igniters, capacitors, and pressure switches ride in the truck so a first visit actually gets the job done. For less common parts, local supply houses in the Tacoma metro keep turnaround short. See our brands page for the full list.
Pricing for HVAC Company in Edgewood, WA
| Service | Typical range in Edgewood |
|---|---|
| AC repair, minor (capacitor, contactor) | $150 – $350 |
| AC repair, major (compressor, control board) | $400 – $650 |
| Furnace repair, minor (igniter, flame sensor) | $150 – $300 |
| Furnace repair, major (blower motor, gas valve) | $400 – $700 |
| AC installation, full system | $3,500 – $7,500 |
| Annual tune-up | $80 – $200 |
What pushes a repair to the higher end in Edgewood is usually access: a furnace in a finished basement with tight clearance, a condenser pad planted on a slope that needs leveling, or a part that has to be ordered from a manufacturer’s regional warehouse rather than pulled from truck stock. Regardless of where the final number lands, you get that number in writing before work starts. That is not a courtesy; it’s how every job works.
Neighborhoods We Serve in Edgewood
We work across the full span of Edgewood, from the older neighborhoods along Jovita to the newer developments east of Meridian. Typical response time for a scheduled call in Edgewood is same-day or next-day depending on the queue, and emergency no-heat calls get priority dispatch.
- Edgemont
- Mountain View
- Jovita
- North Hill
Service Area – Cities Near Edgewood
Beyond Edgewood, our technicians also cover nearby Pierce and King County communities. Many of our Edgewood customers also have family or rental properties in Tacoma, WA and Seattle, WA, and we schedule service across Spokane, WA and Vancouver, WA through the same dispatch line. Call and ask if we service your address.
Serving Edgewood, WA - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Edgewood
Yes. Edgewood permits mechanical replacements through the City of Edgewood building department, and we coordinate the permit pull, the inspection scheduling, and all required documentation as part of the installation. Homeowners never have to stand in line at the counter.
No-heat calls in Edgewood get prioritized dispatch. Most emergency furnace calls are reached same-day, and our live phone line is answered by a real person 24/7. If a part is not on the truck, we leave the home safe and set a firm return window at no additional trip charge.
Every repair we complete in Edgewood carries a written one-year guarantee. If the same repair fails within that period, we come back and fix it at no charge. The guarantee is part of The Garrison Code every job follows.
Call Dalton Heating & Air at (361) 306-9515 for a free estimate on any HVAC work in Edgewood, WA. A live person answers, the price goes in writing before work starts, and the guarantee is good for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edgewood Customers Say
"Changed the filter size and added a better filter rack. Simple and useful advice."
- Rhonda C."Honest, direct people. Told me what the furnace needed and nothing more, and the bill matched."
- Eliza S."Coil cleaning and a refrigerant check before summer. AC has never been this cold."
- Marty D.