Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Edgewood
Furnace repair in Edgewood, WA typically runs $150 – $700, and most no-heat calls can be diagnosed and fixed the same day. If your furnace is blowing cold air, short-cycling, or making a sound you’ve never heard before, call Dalton Heating & Air at (361) 306-9515. We answer live, 24/7, and we show up inside the window we give you. Edgewood’s winter nights drop below freezing, so we treat every no-heat call as urgent.
Marco Benitez leads our crew, and he holds every tech to the same standard: written price before any work starts, a written guarantee on every repair, and a clean site when we leave. No exceptions. That’s how we’ve done it since 2003, and it’s why homeowners in Edgewood call us first when the heat goes out.
Why Dalton Heating & Air Is Edgewood’s Preferred Furnace Repair Company
Edgewood homeowners want a furnace repair company that shows up on time, quotes a price before touching a wrench, and stands behind the work. That’s the baseline, not a selling point. Dalton Heating & Air is a Garrison Partners company, and every tech operates under The Garrison Code: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the repair for a full year.
Our Furnace Repair team is factory-trained on nine major residential brands, including Rheem, York, and Bryant. That matters when a furnace in Edgewood has a control board issue or an ignition failure specific to a particular manufacturer. We don’t guess. We test, diagnose, and explain the fix in plain English before we quote it.
Response time to most Edgewood neighborhoods is under 90 minutes for emergency no-heat calls. Calls are answered by a live person around the clock, not a voicemail queue. When your furnace quits at 11 p.m. on a 28-degree night, you get a real voice and a real dispatch, not a callback window.
Edgewood sits in the Mid-Atlantic transition zone where winter design temps hover around 15°F but summer humidity is high. That means your heating system has to handle a real heating load and a heavy latent cooling load. A contractor who sizes a furnace by square footage instead of running a load calculation will oversize it, causing short cycling, higher static pressure, and premature heat exchanger wear. We see this in Edgewood homes all the time, and we fix it properly.
Heat Pump Repair in Edgewood
Heat Pump Repair in Edgewood is a job we handle year-round, because heat pumps run in both heating and cooling mode and pick up more wear than a furnace alone. A heat pump that won’t shift into defrost, has a failed reversing valve, or is low on refrigerant can leave an Edgewood home cold in winter and clammy in summer. Most heat pump repairs in Edgewood run $150 – $700, depending on the component.
Reversing Valve and Defrost Board Failures
The reversing valve is what lets a heat pump switch between heating and cooling. When it sticks, your system may run in cooling mode when you need heat, or vice versa. Defrost board failures show up in Edgewood winters as a unit that ices over and won’t thaw. We replace both, and the repair is guaranteed in writing for a full year.
Refrigerant Leaks and Recharges
A refrigerant recharge is topping off the cooling fluid your system needs to reach set temperature. If a heat pump is low on refrigerant, it’s because there’s a leak. We find the leak, fix it, and recharge to manufacturer spec. Skipping the leak fix just means you’ll pay for another recharge next season.
Heating Repair in Edgewood
Heating Repair in Edgewood covers the full range of what keeps a home warm: furnaces, heat pumps, and the ductwork that moves air through them. When a homeowner on Meridian Avenue or off 72nd Street E calls about cold spots, burning smells, or a furnace that runs constantly without hitting set temperature, we check the whole system, not just the flame. The repair itself usually runs $150 – $700 once the failed part is identified.
Blower Motor and Static Pressure Problems
Our tech responded to a no-heat call off Edgewood Road where a 15-year-old Carrier furnace was short-cycling and tripping its high-limit switch. A static pressure test showed 0.9 in. w.c., nearly double the recommended 0.5, because the return duct was undersized for the 100,000 BTU input. After replacing the failing blower motor and correcting the duct restriction, we ran a load calculation that showed the home only needed 70,000 BTU. The homeowner opted for a right-sized Trane unit instead of another oversized replacement.
Ignition and Flame Sensor Failures
Dirty burners pulling in humid Edgewood air through a poorly sealed combustion closet cause ignition failures that look intermittent but are actually a cleanliness and sealing problem. A weak flame sensor may read the flame as absent and shut the furnace down after 60 seconds. Cleaning and resealing fixes most of these, and we quote the fix before we do it.
Trusted Brands We Service in Edgewood
Dalton Heating & Air services all nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Edgewood customers, that means we stock common replacement parts for Rheem, Bryant, and York furnaces locally, which keeps turnaround faster. Whether it’s a York gas valve or a Bryant ignition control board, our techs know the brand’s quirks and the correct diagnostic sequence for it. You won’t wait days for a part that should be on a shelf.
Common Furnace Repair Problems We See in Edgewood Homes
- Furnace short-cycling from oversized equipment. Edgewood’s mix of older ranchers and newer townhomes means square-footage sizing usually ignores actual envelope tightness and window area. An oversized furnace cycles on and off too fast, wears out the heat exchanger early, and never runs long enough to heat evenly.
- Heat exchanger cracks accelerated by high static pressure. We find this most often in homes built before 1990 that still have the original duct system. Undersized or dirty ductwork pushes static pressure up, which overworks the blower and stresses the heat exchanger until it cracks.
- Ignition and flame-sensor failures from humid combustion air. Humid Edgewood air pulled into a poorly sealed combustion closet clogs burners and coats flame sensors. The furnace presents as intermittent no-heat, but the real fix is cleaning and sealing, not replacing the control board.
- Weak capacitors taking out heat pumps in winter. A failing capacitor can’t deliver the starting torque a compressor or blower motor needs. On a cold Edgewood night, that means a unit that hums but won’t start. We test capacitors on every tune-up so you’re not surprised in January.
Pricing for Furnace Repair in Edgewood, WA
Here are our current line-item ranges for Edgewood:
| Service | Typical Price Range |
|---|---|
| Furnace repair (diagnostic + common part replacement) | $150 – $700 |
| AC repair | $150 – $650 |
| Tune-up | $80 – $200 |
| AC installation | $3500 – $7500 |
What drives the cost is the part: an ignitor is under $200, a blower motor runs higher, and a gas valve is somewhere in the middle. Every diagnostic includes a written quote before any work begins, so you know the number before you approve it. Estimates are free. Call (361) 306-9515 and we’ll give you an exact price for your Edgewood home.
We Also Serve Cities Near Edgewood
Our crews serve Edgewood and the surrounding area, including Seattle, Spokane, Tacoma, and Vancouver. If you’re in one of those cities and your furnace is down, the same written pricing and one-year guarantee apply. Dispatch is coordinated from our Seattle office, but the tech at your door is a local crew member who knows the area.
Serving Edgewood, WA - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Edgewood
If the furnace runs but doesn’t heat well, start with a diagnostic before deciding. In Edgewood, we often find the real issue is a dirty blower wheel, an undersized return duct, or a failing capacitor, and those are repairs in the $150 – $700 range. If the heat exchanger is cracked or the unit is oversized and short-cycling, replacement may be the honest call. Either way, we give you the repair price and the replacement price in writing, then let you decide. Call (361) 306-9515 for an exact diagnosis.
A load calculation changes the size of the furnace you buy. In Edgewood, square-footage rules of thumb usually oversize equipment, because older ranchers and newer townhomes have very different envelope tightness and window area. Oversized furnaces short-cycle, run inefficient, and crack heat exchangers early. A proper Manual J load calculation sizes the furnace to your actual home, and that’s the difference between a unit that lasts 12 years and one that lasts 20. We run load calcs on every replacement we quote.
Furnace repair in Edgewood runs $150 – $700. The part is the biggest variable: an ignitor is under $200, a flame sensor cleaning is at the low end, a blower motor or gas valve pushes toward $500 – $700. Diagnostic fee, labor, and the part are all included in the written quote you approve before we start. No price moves from the quote. Call (361) 306-9515 for a free estimate.
SEER2 is the updated efficiency rating for heat pumps and AC units, measured under stricter testing conditions than the old SEER standard. For an Edgewood home, a higher SEER2 rating means lower cooling bills in our humid summers, but the real savings come from pairing it with a furnace that’s sized correctly. An oversized 80% AFUE furnace will cost more to run than a right-sized 96% AFUE unit, regardless of the SEER2 number on the outdoor unit. We calculate payback on actual utility rates when we quote a replacement.
Yes. A weak capacitor can’t deliver the starting torque a blower motor or compressor needs, so the unit hums but won’t start, or it starts hard and trips a breaker. On a cold Edgewood night, that’s a no-heat call that could have been prevented with a tune-up in the fall. We test capacitors on every tune-up for $80 – $200, and we replace weak ones before they fail. If yours already failed, the repair is covered under our standard written pricing.
If your furnace is down in Edgewood, don’t wait for the house to go cold. Call Dalton Heating & Air at (361) 306-9515. A live person answers, we schedule a same-day visit, and the price is in writing before any work starts. Marco Benitez and our Edgewood crew will get the heat back on.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Edgewood, WA.