Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Edgewood
A new heat pump installation in Edgewood typically runs $3,500 – $7,500 for a standard split system, depending on the size of your home, your ductwork, and what you’re replacing. Most jobs are scheduled within a week, and we do the work right the first time, with a written price before anything starts and a full-year warranty on the install. If you’re comparing heat pump options in Edgewood, call us at (361) 306-9515 and we’ll walk you through the specifics of your house and your budget on the first call.
Our crews know Edgewood’s streets, and our Heat Pump Installation team has worked on ranchers near Edgewood Community Park, newer builds up along Meridian Ave E, and everything in between. We show up in a marked van with a background-checked, uniformed tech, we take the time to measure the house properly, and we leave the job site cleaner than we found it.
Why Dalton Heating & Air Is Edgewood’s Preferred Heat Pump Installation Company
Dalton Heating & Air is a Garrison Partners company, founded in 2003, and we operate under The Garrison Standard on every single job. That means the price goes in writing before any work starts, the install is guaranteed in writing for a full year, and if something isn’t right, our 365-Day Done Right Promise means we come back and make it right at no charge. Edgewood homeowners tend to ask about that last part, because a lot of them have been burned by crews that vanish after the check clears.
Marco Benitez runs our Edgewood-area operations, and he’s built the crew around the same rule: do the job by the book, show up inside the window, and stand behind the work for a full year if anything fails. That’s the Garrison Code, and we’ve held to it since 2003. You’ll also get a live person on the phone 24/7, not a voicemail queue. If your heat pump dies at 9 p.m. in Edgewood, a human answers.
We service nine major residential brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That matters for installation, because the right brand for your Edgewood home depends on your ductwork, your insulation, and how your lot sits, not on what we happen to have in the warehouse. We stock common parts locally for Edgewood customers and can get most anything else within a day or two.
Heat Pump Replacement in Edgewood
Heat Pump Replacement in Edgewood usually means swapping out an aging or failed heat pump for a new one, and it’s the job we do most often for existing homes, especially the older stock near Meridian Ave E and Military Rd E. A replacement is different from a repair because it involves removing the old equipment, inspecting and often correcting the ductwork, and setting the new unit to match the actual heat load and static pressure of the house. If you’re at the point where the old unit is 15-plus years old, leaking refrigerant, or short-cycling, replacement often beats repairing in Edgewood. You can expect to pay $3,500 – $7,500 for the work, depending on the system and the ductwork.
When Replacement Beats Another Repair
If your existing heat pump is older than 12 to 15 years and the compressor or reversing valve fails, you’re looking at a repair bill that may not buy you much time. Edgewood homes with single-pane windows and uninsulated crawlspaces put real strain on aging systems. Replacing with a properly sized unit, matched to the duct static pressure, often drops the monthly bill enough to justify the cost within a few years.
The Load Calculation Step
We never replace a heat pump based on square footage alone. Edgewood’s mix of older ranchers and newer two-story builds on the same street means two houses with identical floor plans can need different tonnage. We run a full load calculation before any replacement quote, and that number, not a guess, determines the equipment size and the price.
Mini Split Installation in Edgewood
Mini Split Installation in Edgewood is our go-to recommendation for homes with no existing ductwork, or for additions and garage conversions where running new ducts would mean tearing into walls and ceilings. A single-zone mini split in Edgewood runs $3,500 – $7,500, and the job typically takes one to two days depending on the line set run and the wall construction. Mini splits let you heat or cool specific rooms independently, which makes sense in Edgewood’s older ranchers where the back bedrooms always run five degrees off from the living room.
No Ductwork, No Problem
Many Edgewood homes built before ducted heat pumps became standard still rely on baseboard heat or wall units. A mini split can go in without major renovations, mounted high on a wall or in the ceiling, with a small line set running to an outdoor condenser. It’s quiet, efficient, and often the only practical way to add true cooling to an older Edgewood house.
Zones for Real Control
On Edgewood’s hilly lots, the lower floor heats differently than the upper floor. A multi-zone mini split lets you set different temperatures in different rooms. That’s not a luxuries extra here; it’s how you keep the whole house comfortable when the terrain and the sun exposure work against you.
Trusted Brands We Service in Edgewood
We install and service the brands homeowners in Edgewood already know: Goodman, Rheem, York, and Daikin, along with Carrier, Trane, Lennox, Bryant, and American Standard. If you have a Goodman in one part of the house and a Daikin in another, we can handle both. We keep common replacement parts for these brands in local stock for Edgewood jobs, so a failed capacitor or a worn contactor doesn’t mean three days of waiting. On installs, we’ll match the brand to your house, your ductwork, and your budget, always with the written price before any work starts.
Common Heat Pump Installation Problems We See in Edgewood Homes
- Oversized units in older ranchers. Many Edgewood homes from the 1960s and 1970s got heat pumps sized on square footage alone. With single-pane windows and uninsulated crawlspaces, the air leaks make a 2-ton unit work like a 3-ton, and the oversized unit short-cycles. That kills efficiency and shortens the compressor’s life.
- Undersized returns choking new equipment. Edgewood’s older ranchers often have return ducts that are too small for a modern high-SEER2 heat pump. If we don’t address the static pressure, the new unit struggles to move air and never reaches the efficiency on the label.
- Refrigerant charge mistakes on long line sets. Hilly lots in Edgewood mean some line sets run 40 or 50 feet from the condenser to the air handler. If the refrigerant charge isn’t dialed in for that length, the compressor runs hard and fails early. We weigh the charge, we don’t guess it.
- New equipment on old thermostats. We see Edgewood homes where a new variable-speed heat pump is wired to a 20-year-old thermostat. The unit never modulates properly. We replace the thermostat and calibrate it as part of a proper install, not as an add-on.
Pricing for Heat Pump Installation in Edgewood, WA
Here’s what you can expect to pay for heat pump work in Edgewood, with the price in writing before any work begins.
| Service | Edgewood Price Range |
|---|---|
| Heat pump installation (standard split system) | $3,500 – $7,500 |
| Mini split installation (single zone) | $3,500 – $7,500 |
| Furnace repair | $150 – $700 |
| AC repair | $150 – $650 |
| Tune-up | $80 – $200 |
What moves the price on a heat pump install in Edgewood? Three things: the size of the unit a proper load calculation calls for, the condition of your ductwork, and whether you’re going with a single-stage or a variable-speed system. The written quote includes all of it, no surprises, no add-ons at the door. Call (361) 306-9515 for a free estimate specific to your house.
We Also Serve Cities Near Edgewood
Our crews serve Edgewood and the surrounding communities, including Seattle, Spokane, Tacoma, and Vancouver. If you’re just across the city line and need heat pump work, the same written pricing and the same full-year guarantee apply.
Serving Edgewood, WA - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Edgewood
If your heat pump is under 10 years old and the failure is a capacitor, contactor, or thermostat, a repair usually makes sense. If it’s over 15 years old, leaking refrigerant, or the compressor is failing, replacement is almost always cheaper over the next five years. In Edgewood’s older homes, the repair-versus-replace math is especially driven by how the original unit was sized and whether the ductwork can support a newer, more efficient system. Call (361) 306-9515 and we’ll give you an honest read on your specific unit.
For Edgewood’s climate, a SEER2 rating of 15 to 17 is the sweet spot for most homes. Higher SEER2 ratings cost more up front but make sense in larger two-story homes or where the unit runs year-round. We’ll run the numbers on your actual cooling and heating hours so you can see what the efficiency difference means on a real Puget Sound utility bill, not a brochure.
Edgewood’s housing stock swings dramatically from street to street. Older one-story ranchers with single-pane windows and uninsulated crawlspaces sit right next to newer two-story builds along Meridian Ave E. Square footage alone is a terrible way to size a heat pump here. A proper load calculation often flips the answer between a 2-ton and a 3-ton unit, and that decision changes your purchase price and your monthly bill for the life of the system.
Yes, that’s exactly what mini splits are for. Many Edgewood ranchers and older homes have no ductwork, and a mini split lets us add true heating and cooling without tearing out walls or ceilings. Single-zone units run $3,500 – $7,500, and the installation usually takes a day or two depending on the line set run and wall construction.
A single repair in Edgewood runs $150 – $650 for most parts and labor. A full replacement runs $3,500 – $7,500. The deciding factor is what you’re repairing. A $200 capacitor on a 6-year-old unit? Repair it. A $1,200 compressor on a 15-year-old unit? Replace it. We’ll show you the exact numbers for your situation before you decide. Call (361) 306-9515 for a free estimate.
If you’re weighing a heat pump install in Edgewood, you want a crew that shows up, puts the price in writing, and stands behind the work for a full year. That’s what we do. Call Dalton Heating & Air at (361) 306-9515 and we’ll get you a free, written estimate for your home.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Edgewood since 2003.