Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
HVAC Company in Spokane, WA
Dalton Heating & Air is an HVAC company serving Spokane, WA with written pricing, on-time arrival, and a full-year written guarantee on every repair. Spokane homes push HVAC equipment harder than most: winter lows near zero, summer spikes into the 90s, and a housing stock that runs from 1920s South Hill frame houses to new builds in the Latah Valley. That mix of age, altitude, and temperature swing means the same job can look very different from one block to the next. Call (361) 306-9515 and a live person answers, 24/7.
Why Spokane Homes Are Different
Spokane sits at roughly 1,900 feet, with cold air pooling in the valley and pines shading a good portion of the city. Furnaces here carry the heating load for five to six months most years, while AC systems get pushed hard in July and August. Many homes on the South Hill and in Shadle Park were built before central air was standard, so we regularly see AC retrofits tied into existing ductwork that was sized for heat only. That changes the conversation: sometimes a heat pump is the smarter play than another AC-only system.
Housing age matters too. Homes in Hillyard and Emerson-Garfield often have original duct runs that leak enough to cost real dollars each winter. Newer construction in the North Side and up toward Mead tends to be tighter, which shifts the load calculation toward smaller equipment and better humidity control. Terrain adds its own wrinkle: crawlspaces cut into hillsides, rooftop units on flat-roofed 1970s builds near Spokane Community College, and long refrigerant line runs on daylight basements. The Garrison Standard is built for exactly this kind of variation: arrive inside the stated window, put the price in writing before any work starts, do the job by the book, and leave the site clean.
Our Main Spokane Services
Two calls dominate the phones for Spokane homeowners: a furnace that quits in the middle of a cold snap, and an AC system that can’t hold temperature during a heat wave. Heat pump installation rounds out the most common requests, especially as more homeowners look for one system that handles both seasons.
AC Repair in Spokane
When an AC system fails in Spokane during a 90-degree stretch, the usual culprits are refrigerant leaks, failed capacitors, or contactors worn out from short cycling against wildfire smoke. We test the system under load, find the exact fault, and put the repair price in writing before we touch anything. Most AC Repair in Spokane calls are completed same-day, and every repair carries a written one-year guarantee with a free return visit if it fails.

Heat Pump Installation in Spokane
Heat pumps have become the most common installation request for Spokane homes with electric heat or aging AC equipment. The real advantage here is shoulder-season efficiency: instead of running a furnace in October or an AC unit in April, a heat pump handles both at a lower operating cost. Sizing matters more in Spokane than in Seattle because the winter design temperature sits below 10°F, so the system needs to be rated for the actual cold, not just a mild-coast average. Our Heat Pump Installation in Spokane work includes a load calculation, a written fixed price, and a set install date before any equipment is ordered.

Furnace Repair in Spokane
January in Spokane is when furnaces show their age. Igniters, flame sensors, pressure switches, and blower motors are the parts that fail most often, and they tend to fail on the coldest nights. We carry common parts for Rheem, York, and Bryant furnaces on our trucks, which shortens most repair visits to a single trip. Every Furnace Repair in Spokane call starts with a written diagnostic price, then a written repair quote before work begins, all covered by the one-year written guarantee.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Spokane
Dalton Heating & Air factory-trained technicians work on Rheem, York, Daikin, and Bryant systems, among others. We keep common failure parts for these brands stocked locally, which means many Spokane repairs finish in one visit instead of waiting on a parts shipment. See our brands page for the full list.
Pricing for HVAC Company in Spokane, WA
These are the ranges Spokane homeowners should expect for the most common HVAC jobs. Exact pricing is always in writing before work begins, so the number you approve is the number you pay.
| Service | Typical range in Spokane |
|---|---|
| AC repair | $150 – $650 |
| Furnace repair | $150 – $700 |
| AC installation | $3,500 – $7,500 |
| Tune-up | $80 – $200 |
What pushes a repair toward the top of that range in Spokane is usually part cost and access: a variable-speed blower motor or a board on a high-efficiency system will outprice a contactor or flame sensor. Every quote is written before work starts, so there is no door-knock surprise on the final number.
Neighborhoods We Serve in Spokane
We run calls across the city and out into the surrounding terrain. Our techs are in these neighborhoods most weeks:
- South Hill
- Shadle Park
- Hillyard
- Emerson-Garfield
- Latah Valley
For most Spokane neighborhoods, a technician can be on-site within a few hours for emergency repair calls, and we schedule installation and tune-up visits in a set window so you are not waiting around all day.
Service Area – Cities Near Spokane
Beyond Spokane proper, Dalton Heating & Air covers the nearby communities where the housing stock and climate create the same heating and cooling demands. We run calls in Airway Heights, WA, Mead, WA, Medical Lake, WA, and Cheney, WA. Dispatch and scheduling are coordinated from the brand’s Seattle office; crews serving Spokane are local to the Inland Northwest.
Serving Spokane, WA - Our Local Coverage Area
We’re based in the Spokane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Spokane
For no-heat or no-cooling calls, we typically reach most Spokane neighborhoods within a few hours, and a live person answers the phone 24/7 to set the appointment. Call (361) 306-9515 and we will give you a real window, not a callback promise.
Most HVAC repairs and tune-ups in Spokane do not require a permit, but new installations and some ductwork changes do. Dalton Heating & Air identifies permit requirements during the estimate so the job starts clean and stays compliant with local code.
Every repair is guaranteed in writing for a full year under the 365-Day Done Right Promise. If it fails during that time, we return at no charge. No fine print, no waiver to sign, no prorated nonsense.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Spokane Customers Say
"Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B."Tech arrived in uniform right on time. AC wasn't cooling, found a failed capacitor, and replaced it in twenty minutes. The owner is a veteran and the company runs like it."
- Frank O."Blower motor died on the coldest night. They had the part on the truck and had us warm again the same day."
- Sandy G.







Before
After
Before
After
Before
After