Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Tacoma, WA
Dalton Heating & Air handles HVAC repair and installation across Tacoma with written pricing, on-time arrival, and a full-year guarantee on every repair. Tacoma’s mix of 1920s craftsmans, mid-century ramblers, and newer hillside builds means no two systems fail the same way, and the marine air off Commencement Bay keeps condensate lines and outdoor coils working harder than they do inland. If your heat pump or gas furnace has quit, call (361) 306-9515 and a live person answers.
Why Tacoma Homes Are Different
Tacoma’s housing stock runs older than most Puget Sound suburbs. The North End has 100-year-old homes with converted basements and gravity-furnace retrofits, while the South End and Eastside lean toward 1950s and 1960s ramblers on crawlspaces. Hilltop and Stadium sit at elevation, which changes how condensate drains and how hard a heat pump works on a cold February morning. Those hills also mean uneven settling; we regularly find duct runs that have pulled apart at joints in older Tacoma homes, leaking conditioned air into crawlspaces and attics.
The salt-influenced air near the water accelerates corrosion on outdoor condenser coils and electrical connections, especially in Ruston and along the waterfront. Puyallup plume moisture and the damp shoulder seasons mean condensate lines plug with algae faster than in drier climates. Permits matter here: Tacoma requires mechanical permits for most furnace and heat pump replacements, and the city’s energy code has specific duct-sealing and airflow requirements that a crew from a neighboring county may not know well. We pull permits on every installation and schedule the inspection ourselves.
Our Main Tacoma Services
Three calls dominate our Tacoma board: a dead AC in July, a furnace that won’t light in December, and a homeowner replacing an aging heat pump before it fails. Each has its own page below.
AC Repair in Tacoma
Tacoma’s warmest stretch runs mid-July through August, when indoor temps climb fast in older homes without proper attic insulation. Most AC failures we see are refrigerant leaks, failed capacitors, and clogged condensate drains, and on the steep lots in Browns Point and Proctor, a system that loses charge will run nonstop without hitting set temperature. We carry capacitors, contactors, and drain-line parts on the truck, so most repairs finish in one visit. Full details, including pricing ranges, are on the AC Repair in Tacoma page.
Heat Pump Installation in Tacoma
Tacoma’s shoulder seasons and mild winters make heat pumps the right fit for most homes, especially where gas service was never run or a homeowner wants to drop a fuel bill. The trick here is sizing and placement: a unit short-cycled into a tight side yard off North End alleys underperforms, and a unit installed without a proper load calculation will never hit its SEER rating. We size with Manual J, not rule of thumb, and we write the final price before any equipment gets ordered. The full process is on the Heat Pump Installation in Tacoma page.
Furnace Repair in Tacoma
When Tacoma dips into the 20s, a furnace that won’t ignite is a real problem, not a scheduling nuisance. Older homes in the South End and McKinley often have 80% furnaces vented through masonry chimneys that have degraded, and we regularly see flame-sensor and pressure-switch failures that a tune-up would have caught in October. If your furnace is blowing cold air or short-cycling, call before the parts backlog builds. Specific repair costs and the guarantee terms are on the Furnace Repair in Tacoma page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Tacoma
Dalton Heating & Air is factory-trained on nine residential brands, including Goodman, Rheem, and Daikin. We stock common parts for these systems on our trucks, which shortens most Tacoma repairs to a single visit. For a full list of covered equipment, see our brands.
Pricing for HVAC Company in Tacoma, WA
| Service | Typical range in Tacoma |
|---|---|
| AC repair | $150 – $650 |
| Furnace repair | $150 – $700 |
| AC installation | $3,500 – $7,500 |
| Tune-up | $80 – $200 |
What pushes a Tacoma job toward the top of those ranges is usually access: tight crawlspaces in older ramblers, rooftop units on commercial-adjacent buildings, or water-damaged ductwork that needs more than a patch. Whatever the number is, it goes in writing before the first tool comes off the truck, and the repair guarantee is full-year, not 30-day.
Neighborhoods We Serve in Tacoma
We run calls across the city, from the North End down to the tide flats and out past the mall. Tacoma’s geography means drive time varies more than a grid city, but crews are dispatched locally and typically arrive within the stated window.
- North End
- Proctor District
- Hilltop
- South End
- McKinley
Service Area – Cities Near Tacoma
Beyond Tacoma, we cover the surrounding South Sound communities, including Milton, WA, University Place, WA, Puyallup, WA, and Federal Way, WA. If you’re just outside the city and unsure whether we’ll come out, call and ask, because the answer is usually yes.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Tacoma
Same-day service is available for most repair calls across Tacoma, with crews dispatched locally rather than from a distant office. Calls are answered by a live person 24/7, so you’ll know your arrival window before you hang up.
Yes, most furnace and heat pump replacements in Tacoma require a mechanical permit, and the city’s energy code has specific duct-sealing and airflow requirements. Dalton Heating & Air pulls the permit on every installation and coordinates the inspection, so you’re not left with an open permit on your property record.
No overtime charge applies to emergency calls in Tacoma. The price quoted before work begins is the price you pay, whether the call lands on a Tuesday morning or a Sunday night.
Call (361) 306-9515 for a free estimate on any HVAC work in Tacoma. A real person answers, the price goes in writing, and the repair is guaranteed for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tacoma Customers Say
"Coil cleaning and a refrigerant check before summer. AC has never been this cold."
- Marty D."Good communication, tidy, and disciplined work. Taped off the floor and wiped the unit down."
- Karen J."Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B.