Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Edmonds
Furnace repair in Edmonds, WA usually runs between $150 and $700 for a diagnostic and common part replacement, and our technicians reach most Edmonds neighborhoods the same day you call. We’re familiar with the marine air off Puget Sound, the 1970s ductwork in the Edmonds Bowl, and the way a furnace that ran fine in October can quit during the first hard cold snap. When your heat goes out, call (361) 306-9515 and you’ll get a live person who can schedule a tech to your door.
Why Dalton Heating & Air Is Edmonds’s Preferred Furnace Repair Company
Edmonds homeowners call us because we put the price in writing before any work begins, every single time. That’s not a slogan, it’s The Garrison Standard, and we’ve been held to it since 2003 as part of the Garrison Partners network. The tech who arrives at your door is background-checked, uniformed, and factory-trained to work on nine major HVAC brands, including Trane, Lennox, and Rheem.
What that means for a house on Olympic View Drive or a condo near the Edmonds waterfront: no door-price changes, no surprise upsells, and a written guarantee on every repair we make. If the repair fails within a full year, we return at no charge under our 365-Day Done Right Promise. Our scheduling is coordinated from the brand’s Seattle office, but the crews serving Edmonds live and work in this area, so they know the streets, the housing stock, and the particular ways a Puget Sound climate wears on furnaces.
Marco Benitez, who leads our team, holds every tech to The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That’s the whole arrangement, and it applies whether you’re in Edmonds or one of the nearby cities.
Emergency Furnace Repair in Edmonds
Emergency Furnace Repair in Edmonds is a same-day service for no-heat situations, where the temperature inside your home is falling and you can’t wait for a scheduled appointment. If you live in the Edmonds Bowl, Perrinville, or near Pine Ridge Park, we can typically dispatch a technician and have heat restored within hours, not days. A no-heat call in Edmonds usually means a failed ignitor, a dead blower motor capacitor, a gas valve that won’t hold, or a flame sensor so corroded by marine air that it can’t prove the burner lit. Our techs carry the common replacement parts for Trane, Lennox, Goodman, and Rheem furnaces, so many emergency repairs are completed on the first visit.
No-Heat Diagnostic
We start every emergency call by measuring what’s actually wrong, not guessing. That means testing the ignitor, flame sensor, gas valve, pressure switch, and control board, then walking you through exactly what failed, what the repair costs, and whether a replacement is the smarter long-term move. The diagnostic is part of the repair price, which runs $150 to $700 depending on the part.
Same-Day Ignitor and Flame Sensor Service
Near the Edmonds waterfront, salt air and damp winters corrode flame-sense components faster than they would in a drier climate. That’s why we stock ignitors and flame sensors on every truck that serves Edmonds, so a corroded sensor or a cracked ignitor doesn’t leave you without heat overnight.
Furnace Maintenance in Edmonds
Furnace Maintenance in Edmonds is an annual service that runs $80 to $200 and includes a full safety inspection, a cleaning of the burner and flame sensor, and a check of static pressure and airflow. Homes in Edmonds sit in a marine-influenced pocket north of Seattle, where winters rarely drop below 27°F but shoulder seasons are long, damp, and cool enough to keep your furnace cycling for hundreds of extra hours. That runtime is why a fall tune-up matters more here than in a colder, drier market. A weak capacitor or a dirty flame sensor may hold through a mild summer, then fail during the first real cold snap in January.
Pre-Season Safety Inspection
We check the heat exchanger for cracks, test the gas valve, inspect the venting, and measure carbon monoxide levels while the burner fires. If anything looks off, you get a written report and a fixed price before any repair work is authorized, so you make the call with numbers in hand.
Airflow and Static Pressure Check
Edmonds homes built in the 1970s and earlier often have ductwork sized for old, oversized furnaces. A modern, correctly sized furnace paired with those ducts can short-cycle or trip a limit switch, not because the furnace is failing but because the air can’t move. Our maintenance includes a static pressure check that catches this before it turns into a mid-winter breakdown.
Trusted Brands We Service in Edmonds
Our technicians are factory-trained on Trane, Lennox, Goodman, and Rheem, along with five other major brands. That training means we know the failure patterns for each brand, which parts are likely to be on the truck, and how to fix the unit correctly the first time. For Edmonds homeowners, it also means faster turnaround, because we stock common parts for these furnaces rather than waiting for a distributor to ship something from Tacoma or Kent. If you have a Rheem in the Edmonds Bowl or a Lennox in a split-level off 9th Ave, we can usually have it diagnosed and running the same day.
Common Furnace Repair Problems We See in Edmonds Homes
- High static pressure from older ductwork. Many Edmonds houses were built when furnaces were oversized and ductwork was run generously. A newer, correctly sized furnace can struggle against that ductwork, tripping the high-limit switch and short-cycling. We measure static pressure to separate an airflow problem from an actual part failure.
- Marine-air corrosion on flame sensors and ignitors. Homes within a mile or so of the water, from the Edmonds waterfront up toward Perrinville, get a steady dose of salt-laden air. Flame sensors corrode and stop proving the flame, which shuts the furnace down. This is a maintenance issue as much as a repair one, and annual cleaning prevents most failures.
- Failed capacitors from long shoulder-season runtime. Edmonds furnaces cycle on for far more hours than the winter temperature alone suggests, because October, November, March, and April are cool and damp enough to keep the thermostat calling. A capacitor that would last five years in a drier climate may fail in three here. It’s the most common part we replace.
- Ignored fall maintenance compounding into a no-heat call. When summers are mild, homeowners often skip the annual tune-up. Then a weak capacitor, a dirty flame sensor, and a clogged filter all fail during the same cold week in January, and the furnace locks out entirely. A $80 to $200 tune-up in October prevents most of the $150 to $700 repair calls we make in January.
Pricing for Furnace Repair in Edmonds, WA
Furnace repair in Edmonds costs $150 to $700 for a diagnostic and common part replacement, and the price is always written down before the tech picks up a tool. Here’s what that range covers in this market:
| Service | Price Range |
|---|---|
| Furnace repair diagnostic and common part replacement (capacitor, igniter, flame sensor) | $150 – $700 |
| Furnace tune-up and safety inspection | $80 – $200 |
What moves a repair toward the higher end is the part involved, a blower motor or gas valve costs more than a capacitor or flame sensor. We give you the exact number before any work starts, and the repair is guaranteed in writing for a full year. If it fails in that time, we return at no charge. Call (361) 306-9515 for a free estimate.
We Also Serve Cities Near Edmonds
If you’re in Mountlake Terrace, Lynnwood, Kenmore, or Kingston, you’re inside our service area and we can usually reach you the same day. Our Furnace Repair team handles everything from a dead ignitor to a full system evaluation, and the pricing and guarantee are the same in every city we cover. Furnace Repair in Edmonds is our home market, but the Garrison Standard travels.
Serving Edmonds, WA - Our Local Coverage Area
We’re based in the Edmonds area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Edmonds
Fifteen years is about the point where you should weigh the repair cost against the remaining life of the heat exchanger and the efficiency you’d gain from a new unit. If the repair is under $700 and the heat exchanger is sound, fixing it usually makes sense. But if the furnace is a 15-year-old 80% efficiency unit and the repair is a gas valve or a blower motor, replacing it with a properly sized high-efficiency furnace often pays for itself over five to seven years in lower gas bills, especially given how many hours your furnace runs during Edmonds’s long shoulder seasons. We give you both numbers, the repair quote and a replacement quote with a load calculation, so you can compare them side by side. Call (361) 306-9515 and we’ll send a tech who will not push you toward a sale you don’t need.
Yes, for the repairs that account for most no-heat calls in Edmonds, a failed capacitor, a corroded flame sensor, a cracked ignitor, or a tripped pressure switch, the $150 to $700 range covers the diagnostic and the part. A blower motor or an inducer motor can push toward the upper end of that range, and a heat exchanger replacement is a larger job that sometimes makes replacement the better call. What we won’t do is quote you $150 and hand you a $900 bill at the door. The price is written before work begins, and it holds. If we find something else while we’re in there, we bring you a new written price before we touch it.
A load calculation measures your home’s actual heating demand, the square footage, insulation, window area, and air leakage, instead of using a rule of thumb based on square footage alone. In Edmonds, where many homes were built before modern duct sealing and insulation standards, a proper load calculation often shows that a smaller furnace than the old one will heat the house more evenly. That matters because a furnace that’s too big will short-cycle, heat unevenly, and burn more gas than it should. We run the calculation before recommending any replacement, and we’ll show you the numbers. It’s the difference between guessing and sizing.
That pattern usually means your furnace is oversized for the house. In the mild shoulder seasons, an oversized furnace satisfies the thermostat quickly and shuts off, but the house cools fast enough that it cycles back on almost immediately. In January, when it’s cold enough that the furnace finally runs a longer cycle, the heat builds up faster than the ducts can carry it away, and the high-limit switch trips, which is the short-cycling you’re seeing in the cold weather. The fix is often a smaller furnace paired with corrected airflow, not a bigger one. We measure static pressure and run a load calculation to confirm it before recommending any equipment change.
For a furnace, the number that matters is AFUE, Annual Fuel Utilization Efficiency, which tells you what percentage of the gas you burn becomes heat in the house. An 80% AFUE furnace sends 20 cents of every gas dollar up the flue. A 95% AFUE unit keeps 95 cents. In Edmonds’s damp, cool climate, where your furnace runs many more hours than the winter temperature alone suggests, that 15-point difference shows up on your gas bill every month from October through April. If you’re repairing a 95% furnace, it’s almost always worth fixing. If you’re repairing an 80% furnace that’s 15 years old, the repair-vs-replace math changes enough that we’ll show you both options with real local utility rates. Call (361) 306-9515 and we’ll put the numbers in writing.
Call Dalton Heating & Air for Furnace Repair in Edmonds
When your furnace quits in Edmonds, you don’t have time for a voicemail queue or a callback window. Call (361) 306-9515 and a live person answers, 24 hours a day, 7 days a week. We’ll schedule a background-checked, uniformed technician to your door, put the price in writing before any work begins, and guarantee the repair for a full year. That’s The Garrison Standard, and it applies to every furnace repair we do in Edmonds, from a corroded flame sensor near the waterfront to a short-cycling furnace in the Edmonds Bowl.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Edmonds since 2003.