Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Aubrey
Furnace repair in Aubrey, TX typically runs $150 – $700, with most jobs getting done the same day we’re called. When your heat quits during a north Texas cold snap, you need a crew that shows up on time, puts the price in writing before turning a single screw, and stands behind the work for a full year. That’s how we operate at Dalton Heating & Air. We dispatch our service trucks to Aubrey from our Dallas-Fort Worth office, and our technicians know the homes here: the slab foundations, the pier-and-beam houses, the duct systems that shift with the clay soil. Call (361) 306-9515 and talk to a live person, 24 hours a day.
Why Dalton Heating & Air Is Aubrey’s Preferred Furnace Repair Company
Aubrey homeowners call us because we do what we say we’ll do. Every repair starts with a written price before any work begins. Every job ends with a written guarantee covering the repair for a full year. If the same problem comes back inside that window, we return at no charge, and we do not charge a trip fee for it. That’s The Garrison Standard, the operating discipline we’ve held since 2003 as a Garrison Partners company, and it applies to every call in Aubrey.
Our technicians are background-checked and uniformed, so you know who’s walking up your driveway before they knock. They’re factory-trained to service four of the most common furnace brands found in Aubrey homes: Rheem, York, Daikin, and Bryant, plus others. And when you call, you get a real person on the phone. Not a voicemail queue. Not a callback window. A person who can schedule a truck for Aubrey right then.
Led by Marco Benitez, our team works off a simple code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That’s the whole promise. We’ve found that Aubrey homeowners respond to it because too many have been burned by the opposite.
Gas Furnace Repair in Aubrey
Gas Furnace Repair in Aubrey almost always comes down to one of three things: an ignition or gas-valve problem, a blower or capacitor failure, or an airflow issue that looks like a furnace problem but isn’t. Our technicians diagnose all three. Most gas furnace repairs in Aubrey run $150 – $450 depending on the part, with more involved repairs like a heat exchanger replacement climbing toward $700. We’ll never install a part without showing you the written price first.
Ignitors, Gas Valves, and Safety Controls
An ignitor is the small ceramic element that lights your gas burner. It’s a wear item. When it fails, the furnace tries to start, clicks, then shuts off. A gas valve controls fuel flow, and when it sticks or fails, you lose heat entirely. Both are straightforward fixes for a trained technician, and both are repairs you should never attempt yourself: gas and combustion systems are dangerous when handled wrong. We replace ignitors the same visit, typically while we’re still on site for the diagnostic.
Heat Exchanger Inspection and Repair
The heat exchanger is the metal chamber that separates combustion gases from the air blowing into your home. A crack in it is a carbon monoxide risk, plain and simple. When we suspect one, we scope it with a camera. If it’s cracked, we tell you straight: repair or replace, what each costs, and how long each will last. We do not scare homeowners into replacing a furnace that has years left in it. We also do not patch over a real hazard.
Furnace Tune Up in Aubrey
A Furnace Tune Up in Aubrey costs $80 – $200 and is the least expensive insurance you can buy for a heating season. We recommend it every fall, before the first hard freeze, and we’ve seen it prevent the majority of emergency calls we run in December and January. During a tune-up, our technician checks gas pressure, tests the ignitor and flame sensor, inspects the heat exchanger, checks the blower motor and capacitor, measures temperature rise, and tests the high-limit switch. You get a written report of what we found and what we fixed or recommend.
Blower Motor and Capacitor Testing
The blower motor pushes heated air through your ducts, and the capacitor is what starts that motor spinning. In Aubrey, we see weak capacitors more often than failed motors, especially on furnaces that sat through a mild fall and then get hit with the first freeze. A capacitor test takes five minutes, and replacing a weak one is far cheaper than replacing a blower motor that burned out because the capacitor failed first.
Airflow and Static Pressure Check
This is where a generic tune-up stops and a Dalton tune-up does more. Because Aubrey sits on Blackland Prairie clay, duct systems shift. We measure static pressure during tune-ups to catch undersized or crushed returns before they cause short-cycling, cold rooms, or a high-limit trip. Finding that problem in October means you do not wake up to a 55-degree living room in January wondering if your furnace died. It didn’t. The ducts are choking it.
Trusted Brands We Service in Aubrey
We service Rheem, York, Daikin, and Bryant furnaces in Aubrey, along with Carrier, Trane, Lennox, Goodman, and American Standard. Our trucks carry a full stock of common parts for these brands, which means most repairs in Aubrey are completed on the first visit rather than waiting on a parts order. We’re factory-trained on all nine brands, so a technician walking into your Aubrey home has already seen your furnace model before. That cuts diagnostic time and gets your heat back on faster.
Common Furnace Repair Problems We See in Aubrey Homes
- Short-cycling furnaces on clay soil. Aubrey’s Blackland Prairie clay expands and contracts with moisture, and that movement shifts ducts on slab and pier-and-beam homes. Crushed or undersized returns cause short cycling and cold back bedrooms. We fix the airflow, not just the symptom.
- Capacitor and blower motor failures after mild falls. A furnace that runs fine through a 70-degree November quits on the first hard freeze because the capacitor has been dying quietly for months. We test capacitors during tune-ups and replace weak ones before they fail.
- Dirty filters, blocked coils, and high-limit trips. A clogged filter starves airflow, the evaporator coil ices up, and the high-limit switch trips, which makes a furnace behave like the heat exchanger is cracked. We scope the exchanger to confirm it’s fine, then clear the airflow issue.
- Ignitor and flame sensor failures. These are consumable parts. When they go, the furnace clicks but won’t light, or lights and shuts off after a few seconds. We keep replacements on the truck and usually have heat restored the same visit.
Pricing for Furnace Repair in Aubrey, TX
Here’s what furnace work actually costs in Aubrey, in writing:
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
The spread on repair comes down to parts. An ignitor, flame sensor, or capacitor runs on the lower end. A gas valve, blower motor, or control board runs higher. A heat exchanger replacement is the top of the range, and sometimes the point where replacement makes more sense than repair. We’ll show you the numbers for both before you decide. Estimates are free. Call (361) 306-9515 and you’ll have a written price before any work begins.
Most Aubrey homeowners want to know whether to repair or replace. Here’s our honest guidance: if the repair is under $700 and your furnace is under 12 years old, repair it. If the heat exchanger is cracked and the unit is past 15 years, run the replacement numbers. We’ll give you both, and we won’t push the more expensive option if the cheaper one is the right call. That’s The Garrison Code.
We Also Serve Cities Near Aubrey
Our Furnace Repair team works in Aubrey and the surrounding towns, including Pilot Point, Frisco, Little Elm, and Denton. If you live in any of those areas, the same written pricing, same-day response, and one-year written guarantee apply. Learn more about our furnace work across the region on our Furnace Repair in Aubrey page for local specifics.
Serving Aubrey, TX - Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Aubrey
In Aubrey, it’s usually the ducts. The Blackland Prairie clay under your slab or pier-and-beam foundation shifts with moisture, and that movement pinches or crushes returns. A static pressure test will tell us in about 20 minutes. We were called to a home off Fishtrap Road in Aubrey where the furnace ran but only two bedrooms ever got warm. A static pressure test showed the return was undersized, and the gas furnace’s heat exchanger was fine. We recalculated the load, corrected the return and balancing, and left the original Carrier furnace in place. Fixing the airflow cost far less than replacing a furnace that was never the problem. Call (361) 306-9515 for a free estimate and we’ll test yours.
Most furnace repairs in Aubrey run $150 – $700. The range depends on the part: an ignitor or flame sensor on the low end, a gas valve or blower motor in the middle, a heat exchanger at the top. The price is always in writing before we start, so there’s no door-knocking surprise. Call (361) 306-9515 with your symptom and we’ll give you a realistic range over the phone.
The rule we use: if the repair is under $700 and the furnace is under 12 years old, repair it. If the heat exchanger is cracked and the unit is past 15 years, run replacement numbers. We’ll give you both figures in writing and let you decide. We don’t make our technicians’ pay depend on what they sell, so there’s no incentive to push replacement when a repair is the honest answer.
A load calculation measures your home’s actual heating demand based on square footage, ceiling height, window orientation, insulation levels, and duct condition. In Aubrey, where duct systems on Blackland Prairie clay often run inefficiently, a load calculation catches sizing mistakes that simply matching the old nameplate tonnage misses. We recalculated the load on a Goodman furnace short-cycling in Aubrey and traced the problem to a weak capacitor and a mis-calibrated thermostat. A five-minute capacitor test plus thermostat calibration had it cycling normally the same visit. The furnace was sized right. The controls were wrong. Without the load check, we might have replaced a furnace that needed neither replacement nor major repair.
SEER2 is the updated efficiency standard that replaced SEER in 2023, and it measures cooling efficiency in real-world conditions, including duct losses. A higher SEER2 number means lower electricity draw for the same cooling output. In Aubrey, where summers run hot and humid and duct systems often leak due to clay-soil movement, a system with a high SEER2 rating loses much of its efficiency if the ducts are bad. Fixing airflow problems first means the efficiency number on the box actually shows up on your bill. For heat, AFUE is the number that matters: the percentage of fuel that becomes usable heat. We’ll explain both in plain terms when we quote your repair or replacement.
When your furnace acts up in Aubrey, call us. We’ll answer the phone, get a truck out, hand you a written price, and stand behind the repair for a full year. Call (361) 306-9515 now for a free estimate.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Aubrey since 2003.