Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Johns Creek
A heat pump installation in Johns Creek runs $3,500 to $7,500 for a full system, and the right sizing decision matters more here than the equipment brand. Most Johns Creek homes were built between the 1980s and 2000s with ductwork sized for a furnace and straight AC, not a heat pump. That means a proper load calculation before any install changes whether the system actually delivers on its efficiency numbers. We’re Dalton Heating & Air, and we’ve been installing heat pumps in Johns Creek long enough to know what those existing ducts will and won’t do. Call (361) 306-9515 for a written quote before you commit to anything.
Why Dalton Heating & Air Is Johns Creek’s Preferred Heat Pump Installation Company
Johns Creek homeowners tend to ask the same three questions: what does it cost, who is showing up, and will the job hold. We answer all three in writing before the first tool comes off the truck. Marco Benitez, who leads our Johns Creek install teams, runs every job against The Garrison Code: arrive inside the stated window, put the price in writing before starting, do the work by the book, leave the site clean, and stand behind it for a full year. That’s been the standard since 2003, and it applies to every heat pump we put in, from single-zone ductless units to full variable-speed replacements.
Our technicians arrive in uniform, background-checked, and factory-trained to service nine major residential brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. When a Johns Creek customer calls, a real person answers, 24/7. No callback ticket. If the heat pump repair or install doesn’t hold within the year, we come back at no charge. That’s the 365-Day Done Right Promise, and it’s written on every invoice.
Ductless Heat Pump Installation in Johns Creek
Ductless heat pump installation in Johns Creek solves a problem that comes up constantly in the city’s older subdivisions off State Bridge Road and Medlock Bridge Road: the ductwork is leaking, undersized, or was never designed for a heat pump’s lower supply-air temperature. A ductless system, also called a mini split, skips the ducts entirely. A small outdoor unit connects to one or more wall-mounted indoor heads, each with its own thermostat. It’s the right call when a room addition, finished basement, or converted garage needs heating and cooling without tearing into walls. Installation for a single-zone ductless system in Johns Creek typically falls within the $3,500 to $7,500 range depending on capacity and the number of heads.
When Ductless Beats a Ducted Retrofit
If your Johns Creek home has a crawlspace or attic duct system from the 1990s that leaks 20% or more of its conditioned air, sealing and re-insulating may cost more than going ductless for part of the house. We walk homeowners through that math before they spend anything.
Single-Zone Versus Multi-Zone for Johns Creek Floor Plans
Two-story colonials and ranchers off Kimball Bridge Road often run hot upstairs and cold downstairs. A multi-zone ductless heat pump lets you set independent temperatures per floor or per room without adding ductwork. The outdoor condenser serves up to five indoor heads.
Heat Pump Service in Johns Creek
Heat pump service in Johns Creek covers diagnostics, repair, and seasonal maintenance on existing heat pump systems, whether we installed the unit or not. A service call here runs $150 to $650 depending on the fault. The most common issues on Johns Creek heat pumps are refrigerant leaks at flare fittings, failed reversing valves, and dirty outdoor coils along the Chattahoochee River corridor where pollen and cottonwood debris build up fast. A seasonal tune-up runs $80 to $200 and catches most of these before they become no-heat or no-cooling emergencies.
Repair Diagnostics, Not Guesswork
Our techs check superheat, subcooling, and static pressure on every service visit, not just a quick temperature split. Most heat pump failures in Johns Creek are electrical or charge-related, not compressor failures. We prove it with readings before quoting a repair.
Preventive Service Included With the Install
Every heat pump we install in Johns Creek includes a recommended service schedule at the outset. Two visits a year, one before heating season and one before cooling season, keep factory warranties intact and catch wear on capacitors and contactors early.
Trusted Brands We Service in Johns Creek
We install and service Goodman, Rheem, York, and Daikin heat pumps, among others, and we stock common replacement parts for these brands in our metro Atlanta parts inventory, which means faster turnaround for Johns Creek jobs. A homeowner off Jones Bridge Road doesn’t wait five days for a reversing valve or a defrost control board. When a part is regional-stock, we tell you that up front and schedule the return trip inside the window, not a week out.
Common Heat Pump Installation Problems We See in Johns Creek Homes
- Sizing off the old AC’s tonnage instead of a load calculation. The original equipment tag on a 1990s Johns Creek two-story on McGinnis Ferry Road doesn’t reflect what the house needs now. We run the Manual J before quoting anything.
- Reusing ductwork sized for a gas furnace. Many Johns Creek homes have return trunks too small for a heat pump’s higher airflow requirements. That raises static pressure and shortens blower motor life. We inspect and often upsize returns as part of the install.
- Mixing a new heat pump with an old furnace in a dual-fuel setup. If the existing furnace heat exchanger is rusted or the refrigerant side wasn’t checked, the homeowner ends up paying twice. We verify both sides before starting.
- Ignoring the defrost cycle noise. Heat pumps go into defrost in cold, damp Johns Creek winters. If the install doesn’t account for drainage and noise placement near bedroom windows, it becomes a warranty callback. We plan for it.
Pricing for Heat Pump Installation in Johns Creek, GA
Here’s a straight answer with real numbers for Johns Creek. A full heat pump system install runs $3,500 to $7,500. A diagnostic or repair call runs $150 to $650. A seasonal tune-up runs $80 to $200. What moves the install number is equipment capacity and efficiency tier, duct modifications if your existing ducts are undersized or leaking, and whether you’re adding zones. Our pricing is written before any work starts, not after we open a wall or find a surprise in the crawlspace. Estimates are free. Call (361) 306-9515 and we’ll put the number on paper before you decide anything.
| Service | Price Range in Johns Creek |
|---|---|
| Heat pump installation (full system) | $3,500 – $7,500 |
| Heat pump repair / diagnostic | $150 – $650 |
| Seasonal tune-up | $80 – $200 |
We Also Serve Cities Near Johns Creek
Dalton Heating & Air handles Heat Pump Installation throughout the north metro. Beyond Heat Pump Installation in Johns Creek, our crews cover Atlanta, South Fulton, Sandy Springs, and Roswell with the same written pricing and 365-day guarantee.
Serving Johns Creek, GA - Our Local Coverage Area
We’re based in the Johns Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Johns Creek
Yes, for most Johns Creek homes. Johns Creek’s winters rarely stay below freezing for long stretches, which is exactly the range where modern cold-climate heat pumps deliver 2.5 to 3 times the efficiency of electric resistance heat. The shoulder seasons, when you’re not running a furnace hard but still want heat on a 40-degree morning, are where the savings show up. The catch is the home’s existing ducts. If they’re undersized from the original furnace-and-AC install, the heat pump won’t hit its rated efficiency until those are fixed. Call (361) 306-9515 for a load calculation and a written quote.
It changes the tonnage, the duct plan, and the equipment choice. A load calculation, or Manual J, measures your home’s actual heating and cooling load based on square footage, window orientation, insulation levels, and air leakage, not the size of the old unit. Many Johns Creek homes built in the 1990s and 2000s have 3.5-ton ACs slapped onto 3-ton ducts, or vice versa. The load calc tells us the exact Btu requirement, which drives correct heat pump sizing, which drives efficiency, humidity control, and equipment life. We don’t quote a heat pump in Johns Creek without one.
SEER2 is the cooling efficiency metric under the new 2023 test standard, and HSPF2 is the heating side. A 16 SEER2 heat pump will use roughly 20% less power for cooling than a 13.4 SEER2 unit, which on a typical Johns Creek summer bill of $180 to $220 means $36 to $44 in monthly savings during peak cooling months. The heating season savings on a 9.0 HSPF2 unit versus an older 7.5 HSPF2 are similar in magnitude. The real bill impact in Johns Creek comes from matching the system to the ducts and the house, not just chasing a higher number.
A full heat pump system install in Johns Creek runs $3,500 to $7,500. That range covers single-stage up to variable-speed equipment, with the spread driven by brand, capacity, efficiency tier, and duct modifications. Repairs run $150 to $650. A seasonal tune-up is $80 to $200. Those are the same ranges we quote across all our Johns Creek jobs, and the price is in writing before any work starts. Call (361) 306-9515 for an exact number.
Yes, and it’s often the smartest path. If your Johns Creek home has leaking or undersized ducts, a ductless mini split avoids all of that. We install single-zone and multi-zone ductless systems throughout Johns Creek, including homes off Buice Road, Medlock Bridge Road, and the subdivisions along the Chattahoochee. A ductless install runs within the same $3,500 to $7,500 range as a full system, depending on zones and capacity. For a written quote, call (361) 306-9515.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Johns Creek since 2003.