Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Atlanta
Heat pump installation in Atlanta typically runs $3,500 to $7,500, and the two numbers that determine whether the job actually works are the load calculation and the static pressure reading. Most Atlanta homes we walk into have systems that were never sized correctly for our long cooling season, and the ductwork in the attic is leaking enough air to undo even a perfect install. We are Dalton Heating & Air, a Garrison Partners company held to The Garrison Standard since 2003. We put the price in writing before any work starts, and we answer the phone with a live person 24/7 at (361) 306-9515.
Why Dalton Heating & Air Is Atlanta’s Preferred Heat Pump Installation Company
Atlanta homeowners call us after they have been burned. A crew that did not show. A price that changed at the door. A heat pump that ran for six months and then quit on the first 90-degree day in June. We run every Atlanta job by The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That is not a sales pitch. It is the standard Marco Benitez enforces on every call.
Our technicians are background-checked and uniformed. You know who is coming before they arrive. We are factory-trained to service nine major residential HVAC brands, and our Atlanta crews stock local parts for Goodman, Rheem, York, and Daikin systems so a repair does not stall waiting on a warehouse in another state. When the work is done, you get a written guarantee on every installation, not a verbal promise. If something is not done right, the 365-Day Done Right Promise means we make it right, at no charge, for a full year.
Geothermal Heat Pump Installation in Atlanta
Geothermal heat pump installation in Atlanta is a different animal from a standard air-source swap. A geothermal system pulls heat from the ground instead of the outside air, which means it does not fight Atlanta’s summer humidity the way an air-source unit does. The job involves drilling a ground loop, running the loop to a geothermal unit inside the home, and tying it into your existing ductwork or a new ducted system. Atlanta homeowners consider this when they are staying in the house long-term, have enough yard for the loop field, or want to stop paying for strip-heat backup during a January cold snap.
Ground Loop Sizing
The loop field gets sized by a load calculation, not by guesswork. On a Buckhead lot with mature trees and limited yard, we see horizontal loops installed where possible, and vertical bores where the yard is tight. The clay-heavy soil common in Atlanta holds moisture well, which actually improves ground-loop heat transfer compared to sandy soil.
Cost and Payback in Atlanta
A geothermal install runs on the higher end of and often beyond the air-source range, and it is quoted on a per-job basis after the loop design is done. The payback math in Atlanta works because our cooling season runs from April into October. A geothermal unit moves heat for roughly a third of the electricity an air-source unit uses during peak cooling months.
Ductless Heat Pump Installation in Atlanta
Ductless heat pump installation in Atlanta is the cleanest answer for older homes that were never built with ductwork, and for additions, sunrooms, and converted garages. A ductless system uses an outdoor condensing unit connected by a small line set to one or more indoor wall-mounted heads. Atlanta homeowners in neighborhoods like Grant Park, Cabbagetown, and East Atlanta choose ductless when the house has a boiler or electric baseboard heat, or when adding ducts would mean tearing out plaster and lowering ceilings.
Single-Zone and Multi-Zone
A single-zone ductless heat pump serves one room or one floor. A multi-zone system runs up to four or five indoor heads off one outdoor unit, each head with its own thermostat. In a bungalow in Virginia-Highland where the upstairs bedrooms bake in July and freeze in January, two heads upstairs and one downstairs solves a comfort problem that a central system cannot, because each zone runs independently.
What Ductless Costs Here
Ductless installs in Atlanta generally fall within the $3,500 to $7,500 range depending on the number of heads and the line-set run. It is often less expensive than retrofitting ducts through a 1940s house, and it avoids the static pressure and leakage problems that plague attic ductwork in our humidity.
Trusted Brands We Service in Atlanta
Our Atlanta techs carry factory training and local parts stock for Goodman, Rheem, York, and Daikin. That matters when a capacitor fails in the middle of a Midtown summer and the part is not on the shelf anywhere nearby. We do not push one brand. We size the system to the house and the load calculation, then match the equipment to your budget and how long you plan to stay in the home. Whether it is a Rheem heat pump in Decatur or a Daikin ductless in Smyrna, the install gets the same The Garrison Standard: written price, by-the-book installation, and a full-year written guarantee.
Common Heat Pump Installation Problems We See in Atlanta Homes
- Oversized systems short-cycling. In Atlanta’s mixed-humid climate, a heat pump that is too big cools the air fast but never runs long enough to pull moisture out. The result is a cold, clammy house and a unit that cycles on and off so often it wears out the compressor early. A load calculation, not a rule-of-thumb tonnage guess, is the fix.
- Ductwork in unconditioned attics losing 20 to 30 percent capacity. Most Atlanta homes have duct runs through attics that hit 130 degrees in July. Leaky connections and undersized returns choke airflow, raise static pressure, and make a correctly sized heat pump feel weak. We measure static pressure before we ever recommend a new unit.
- Wrong refrigerant charge after a swap-out. A technician who charges by gauge pressure alone, in Atlanta’s swinging humidity, will undercharge or overcharge by a wide margin. The right way is to weigh in the charge by the manufacturer’s spec and then verify subcooling. We see this mistake constantly on heat pumps that were installed by a cut-rate crew and never ran right.
- Air handler closets too small for a modern blower motor. Red-clay-yard retrofits in Atlanta often mean the original furnace closet was built for a 1980s blower, and the newer variable-speed motor will not fit or cannot breathe. That is a real install constraint we check before quoting, not after the equipment is on the truck.
Pricing for Heat Pump Installation in Atlanta, GA
A full heat pump installation in Atlanta runs $3,500 to $7,500. The range moves on three things: the size and efficiency of the equipment, whether the ductwork needs to be sealed or partially replaced, and whether you are going with a standard air-source system, a ductless setup, or geothermal. Heat pump repair in Atlanta runs $150 to $650 for the common failures, capacitors and refrigerant charge work included. A seasonal tune-up runs $80 to $200 and includes a written report of what we actually found. We do not quote over the phone and surprise you at the door. Marco Benitez and the Atlanta team put the price in writing before any work starts, on every job, without exception. Call (361) 306-9515 for a free estimate.
| Service | Typical Range in Atlanta |
|---|---|
| Heat Pump Installation | $3,500 – $7,500 |
| Heat Pump Repair (capacitor, refrigerant charge) | $150 – $650 |
| Tune-Up | $80 – $200 |
We Also Serve Cities Near Atlanta
Our Atlanta crews run service calls into Smyrna, Mableton, Marietta, and Austell on a regular schedule. If you are just outside the city line and need Heat Pump Installation, the same written pricing and The Garrison Standard apply, no matter the address. For details on coverage across the metro, see Heat Pump Installation in Atlanta.
Serving Atlanta, GA - Our Local Coverage Area
We’re based in the Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Atlanta
If the heat pump is 10 years old and struggling through an Atlanta July, replace it if the compressor or the reversing valve is the failure, or if the repair cost passes roughly half the price of a new system. A 10-year-old heat pump has already lived through most of its expected service life in our humid climate, which shortens compressor life compared to drier markets. If the problem is a capacitor or a refrigerant charge, a $150 to $650 repair usually buys you another season or two. We give you the repair-or-replace math straight, with written pricing on both options, and no commission pushing you either way. Call (361) 306-9515 and we will send a tech to give you the real numbers.
A load calculation changes the size of the system, the airflow requirements, and whether the existing ductwork can handle the equipment. In Atlanta’s mixed-humid climate, oversizing by even half a ton means the heat pump cools the air without running long enough to dehumidify, leaving the house cold and sticky. A proper Manual J load calculation factors in square footage, window orientation, insulation levels, and our outdoor design temperature, then sets the equipment size from that, not from a guess based on the old unit. We will not quote a heat pump installation in Atlanta without one.
Heat pump installation in Atlanta costs $3,500 to $7,500 for a standard air-source system. The range moves on equipment efficiency tier, whether the ductwork needs sealing or replacement, and whether you are installing a ductless system instead. A geothermal install runs higher and is quoted per job after the loop field is designed. You get a written fixed price before any work starts, so the number on the quote is the number you pay. Call (361) 306-9515 for a free estimate.
A SEER2 rating of 15 to 17 makes the most sense for most Atlanta homes because our cooling season runs six to seven months, and the efficiency gain above that range often costs more than it returns on the power bill. If you plan to stay in the house more than ten years, or if you are installing ductless and want per-room control, stepping up to a higher efficiency tier can pay off. We will show you the installed price difference and let you decide with real numbers, not a sales pitch.
Yes. We install ductless heat pumps in Grant Park, Cabbagetown, East Atlanta, Virginia-Highland, and the other older Atlanta neighborhoods where ductwork was never part of the original house. Ductless avoids tearing out plaster, keeps the ceiling height intact, and gives each room its own temperature control. The install typically falls in the $3,500 to $7,500 range depending on the number of indoor heads. Call (361) 306-9515 and we will look at your house and give you a written price.
If your heat pump cannot keep up in Atlanta’s heat, call Dalton Heating & Air at (361) 306-9515. A live person answers, the estimate is free, and the price goes in writing before any work starts.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Atlanta since 2003.