Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Edmonds, WA
Dalton Heating & Air is the HVAC company Edmonds homeowners call when they want a written price before any work starts and a full-year guarantee on every repair. Our crews work throughout Edmonds, from the flats near the waterfront up through the hills around 9th Avenue and beyond. Most calls are for systems that either short-cycle in the marine air or rust out faster than homeowners expect. If you need AC Repair in Edmonds, Heat Pump Installation in Edmonds, or Furnace Repair in Edmonds, call (361) 306-9515 and a live person answers, day or night.
Why Edmonds Homes Are Different
Edmonds sits on a bluff above Puget Sound, which means two things for HVAC work: salt-tinged air and a steady temperature range that hides how hard older equipment actually works. Homes built in the 1960s and 1970s around the bowl of downtown Edmonds often have original ducting sized for oil-fired gravity systems, not modern heat pumps. When we install a heat pump in a 1970s split-level near Edmonds-Woodway High School, the ductwork usually needs modification before the system will move air properly.
Parts of Edmonds near Highway 99, around 220th Street, and up along 100th Avenue West run several degrees warmer in summer than the waterfront. A home on the bluff above the marina can sit ten degrees cooler than one near Lake Ballinger. That changes how sizing is done. A condensing unit on a deck exposed to salt spray off the Sound will rust fins two or three years faster than the same unit in Lynnwood. We factor that in when quoting repairs or replacements in Edmonds. Most of Edmonds is single-family homes built without AC, which makes load calculations for a new system different than a straight swap.
Our Main Edmonds Services
Three calls dominate Edmonds: air conditioning that quits in the first real heat of July, heat pump installs in homes converting off electric baseboards or oil, and gas furnace repairs when the first cold snap hits in October. Here is what each job looks like in Edmonds.
AC Repair in Edmonds
Most Edmonds AC failures we see are either a capacitor that gave out, a contactor that welded shut, or low refrigerant from a slow leak in an aging line set. Homes near the water get more condenser corrosion than inland homes, and that corrosion accelerates contactor failures. A repair usually means diagnosing the exact component, putting the price in writing, and having the part on the truck or sourced same morning. AC Repair in Edmonds is our busiest page in summer, and for good reason: the July heat hits hard after months of marine layer.
Heat Pump Installation in Edmonds
Edmonds is in the middle of a four-year conversion wave, as older homes move off oil and electric resistance heat toward ducted heat pumps and mini-splits. The challenge here is finding an outdoor spot that meets setback rules on smaller lots while staying close enough to the blower to keep line-set runs efficient. We quote heat pump installation in Edmonds the same way every time: load calculation first, written fixed price second. Heat Pump Installation in Edmonds covers what that job looks like on an older Edmonds lot.
Furnace Repair in Edmonds
Edmonds has a large base of 20- and 30-year-old gas furnaces from the building booms of the 1980s and 1990s. The most common failure we run into is a dirty flame sensor or a failing inducer motor, both of which cause the furnace to short-cycle or lock out. Since the fall filter-change window here is short, furnaces often start the season with restricted airflow. Furnace Repair in Edmonds explains our diagnostic process and what you will pay before we touch a screwdriver.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Edmonds
We service Trane, Lennox, Goodman, and Rheem systems throughout Edmonds, plus the rest of the major residential brands. Our trucks carry common capacitors, contactors, igniters, flame sensors, and pressure switches locally, so most repairs finish on the first visit. Our brands page lists every manufacturer our technicians are factory-trained on.
Pricing for HVAC Company in Edmonds, WA
| Service | Typical Range in Edmonds |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
What pushes an Edmonds repair toward the top of that range is parts availability on older off-brand equipment or corrosion damage from salt air that requires replacing a component housing, not just the part inside it. Every quote here is a written, fixed price before work begins. No surprises at the door.
Neighborhoods We Serve in Edmonds
Our crews work across Edmonds, from the waterfront homes along Sunset Avenue up through the hills and into the neighborhoods bordering Lynnwood and Mountlake Terrace. Here are some of the areas we service regularly:
- Downtown Edmonds and the Bowl
- Seaview and the waterfront bluff
- Edmonds-Woodway area
- Westgate and Highway 99 corridor
- North Edmonds near 220th Street
Response times in Edmonds average 60 to 90 minutes during the day for urgent cooling or heating calls, with same-day dispatch for most repairs.
Service Area – Cities Near Edmonds
Dalton Heating & Air serves homes throughout the Edmonds area, including nearby Mountlake Terrace, WA, Lynnwood, WA, Kingston, WA, and Kenmore, NY. If your home sits just outside Edmonds proper, give us a call and we’ll confirm coverage for your street.
Serving Edmonds, WA - Our Local Coverage Area
We’re based in the Edmonds area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Edmonds
Most Edmonds calls are reached in 60 to 90 minutes during normal business hours. After hours, our person-to-person dispatch lines you through to a live coordinator, not a voicemail, and we route the nearest on-call technician. Call (361) 306-9515 and we will give you a real arrival window.
Edmonds requires mechanical permits for most furnace replacements, heat pump installations, and ductwork changes. We pull the permit ourselves and schedule the inspection. Repairs like a capacitor or contactor swap almost never require a permit.
For most repair work, yes. Once we know the symptom and the unit’s make and model, our dispatcher can usually give you a diagnostic fee and a typical repair range. Exact pricing is confirmed on site, in writing, before any work starts. Install quotes require a site visit to size the system and check ductwork.
Need an HVAC company in Edmonds that shows up on time, puts the price in writing, and stands behind the work for a full year? Call Dalton Heating & Air at (361) 306-9515. Marco Benitez and our Edmonds crew are ready.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edmonds Customers Say
"Blower motor died on the coldest night. They had the part on the truck and had us warm again the same day."
- Sandy G."Changed the filter size and added a better filter rack. Simple and useful advice."
- Rhonda C."Honest, direct people. Told me what the furnace needed and nothing more, and the bill matched."
- Eliza S.