Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across North Lauderdale
Most furnace repairs in North Lauderdale run between $150 and $700, and a no-heat call on a cold night is something we take seriously. If your furnace won’t fire, the blower won’t move air, or the thermostat is calling for heat and nothing happens, call us at (361) 306-9515. A Dalton Heating & Air technician will arrive in a branded vehicle, walk you through what we’re checking, and put the price in writing before we touch anything.
North Lauderdale has a split personality when it comes to heating equipment. Some homes in the older sections near Rock Island Road and along Southwest 81st Avenue still run natural-gas furnaces, often paired with a heat pump. Others, especially newer infill construction, are all-electric with heat strips in the air handler. The symptom is the same: no warm air. The fix is often different. That’s why we start every Furnace Repair call by identifying which heat source is actually in play before recommending any work.
We serve all of North Lauderdale, from the residential streets off State Road 7 to neighborhoods around Hampton Pines Park and the areas east of the Turnpike. Dispatch is coordinated through our South Florida office, but the crews running calls in North Lauderdale live and work in this market. We know the housing stock, the common equipment configurations, and the way a humid coastal climate punishes a furnace that sits idle for ten months straight.
Why Dalton Heating & Air Is North Lauderdale’s Preferred Furnace Repair Company
Marco Benitez leads our team, and the standard he enforces is not negotiable: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That’s The Garrison Code, and it’s the same discipline this Garrison Partners network has operated under since 2003. We don’t ask North Lauderdale homeowners to trust us on faith. We give you a written price, a written guarantee, and a technician who’s background-checked and in uniform before they ever step out of the truck.
North Lauderdale customers call us for the same reasons homeowners across Broward County do: they’ve been burned by a no-show, quoted one price and charged another, or had a crew leave a half-finished job and stop returning calls. We answer the phone with a live person 24/7. No voicemail queue, no “we’ll call you back within two business days.” When your furnace is dead on a 40-degree night, you get a human being, not an answering service.
Every repair we perform in North Lauderdale carries a written guarantee for a full year. If the repair fails during that time, the return visit is free. That’s the 365-Day Done Right Promise, and it’s not an upsell or an add-on. It’s included on every service call we run.
Boiler Repair in North Lauderdale
Boiler Repair in North Lauderdale is a smaller slice of the market than furnace and heat pump work, but the homes that have hydronic systems tend to be older, and when a boiler fails, it fails completely. We see these units most often in the mid-century concrete-block homes west of State Road 7, where radiant baseboard heat and cast-iron boilers were installed during the original build. The typical repair range for boiler work in this area is $150 – $700, with a diagnostic call running somewhere in the lower half of that spread.
Circulator Pump and Zone Valve Failures
A boiler that fires but doesn’t push hot water through the baseboards usually points to a failed circulator pump or a stuck zone valve. These are mechanical parts that wear out, especially after long idle periods. We replace the component, bleed the system, and verify flow at every baseboard on the loop before we call the job done.
Pressure and Expansion Tank Issues
Low system pressure or a waterlogged expansion tank will make a boiler short-cycle or shut down entirely. You might get heat for twenty minutes, then nothing. That’s a pressure problem, not a burner problem at all.
Gas Furnace Repair in North Lauderdale
Gas Furnace Repair in North Lauderdale usually starts with an ignition or flame-sense failure. The humid coastal air means these units sit for long stretches with no activity, and when a cold front finally pushes through, the burner won’t stay lit. Homeowners often assume the thermostat is the problem. Most of the time, it’s a dirty flame sensor, a failing ignitor, or a control board that’s been exposed to Florida condensation for longer than it likes. Repairs run $150 – $700 depending on the part, and the diagnostic is included in the repair if you approve the work.
Ignitor and Flame Sensor Replacement
This is the most common furnace fix we perform. The ignitor glows to light the gas, and the flame sensor confirms the burner actually ignited. If either fails, the furnace locks out for safety. We replace the part, cycle the unit several times, and check gas pressure at the valve so you don’t get a repeat call the following week.
Heat Exchanger Inspection and Repair
In older North Lauderdale homes, the furnace often shares a closet with the air handler and the condensate line. That means moisture exposure, and moisture eventually leads to heat exchanger corrosion. If we find cracks, we’ll show you. A compromised heat exchanger is a carbon monoxide risk, and our recommendation is always based on your safety, not on selling you a new unit.
Trusted Brands We Service in North Lauderdale
Our technicians are factory-trained to service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. In North Lauderdale, we see a lot of Goodman and Rheem equipment in the older sections, with York and Daikin more common in newer builds and replacement installs from the last decade. We keep common parts stocked locally so we’re not waiting on a distributor when your furnace is down. If the part is on a shelf in Broward County, we can usually have it in hand the same day.
Common Furnace Repair Problems We See in North Lauderdale Homes
- Ignition failures after long idle periods. A furnace that sits for months in humid coastal air develops dirty flame sensors and oxidizes contacts. The unit tries to fire, fails, and locks out, even though the gas supply is fine.
- Heat exchanger corrosion in shared closets. The mid-century layout that puts the furnace, air handler, and condensate drain in one closet is common here, and it’s a recipe for rust. We perform a visual inspection on every repair, not just the ones where the homeowner asks.
- Blower motor failures that mimic furnace problems. A heat pump or electric heat strip can’t deliver warm air through a dead blower. Homeowners report “the furnace is blowing cold air” when the actual issue is a failed blower motor or a weak capacitor behind the access panel.
- Thermostat misdiagnosis. We get calls where the homeowner has already replaced the thermostat and the problem persists. The real fault is usually a control board, a flame sensor, or a wiring issue at the unit, not at the wall.
Pricing for Furnace Repair in North Lauderdale, FL
| Service | Typical Price Range in North Lauderdale |
|---|---|
| Furnace repair diagnostic and general repair | $150 – $700 |
| AC repair tied to heating system changeover (shared components) | $150 – $650 |
| Tune-up / seasonal system check | $80 – $200 |
The spread from $150 to $700 isn’t a vague estimate. It reflects what’s actually on the invoice. A flame sensor cleaning at $150 is a different job than a blower motor replacement at $500 to $700. What moves the number is the part, the access, and whether the furnace and heat pump share components. We tell you the exact price before any work starts, in writing. No door-knock adjustment, no “while I’m here” add-ons. Call (361) 306-9515 for a free estimate on any furnace repair in North Lauderdale.
We Also Serve Cities Near North Lauderdale
Our crews run Furnace Repair in North Lauderdale and the surrounding South Florida market, including Jacksonville, Miami, Tampa, and Orlando. Same written pricing, same full-year guarantee, same live person on the phone whenever you call.
Serving North Lauderdale, FL - Our Local Coverage Area
We’re based in the North Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in North Lauderdale
We start by checking what the thermostat is calling for and which equipment actually responds. In a dual-fuel setup, the furnace normally handles cold-weather heat while the heat pump covers mild days. If neither is firing, the problem is likely in the control board, the thermostat wiring, or the blower. If the furnace fires but won’t stay lit, it’s usually the flame sensor or ignitor. We figure this out before recommending any repair, and the diagnostic tells us which side is actually down. Call (361) 306-9515 and we’ll walk you through a few checks over the phone first.
If you’re replacing equipment, yes, absolutely. A load calculation sizes the system to your home’s actual heat loss and cooling load, and it’s required to do the job properly. Older North Lauderdale homes were often built with minimal insulation, and original equipment was sometimes oversized or undersized by three full sizes. A proper calculation prevents you from buying a furnace that short-cycles and fails early. If you’re repairing a working system, a load calc isn’t needed, but we’ll still measure static pressure and airflow when the repair involves the blower or duct-side components.
SEER2 is the updated efficiency rating standard that took effect in 2023, and it reflects real-world operating conditions more accurately than the older SEER numbers. For a North Lauderdale home, where the heat pump does most of the annual work, a higher SEER2 rating translates directly to a lower summer electric bill. To put it in real dollars: going from an old 10-SEER heat pump to a 15-SEER2 unit can cut cooling-season energy use by roughly a third, which on a typical Broward County summer bill is meaningful money. We’ll show you the math on your quote so you can see the actual payback period.
The range exists because the work is not all the same. A dirty flame sensor cleaning is quick and done for $150. A failed ignitor runs $250 to $400 with the part and labor. A blower motor replacement, especially if it’s an ECM motor on a newer furnace, can hit $600 to $700. What carries the price is the cost of the specific part, not an arbitrary labor rate. You’ll know the exact number before we start, and the estimate is free. Call (361) 306-9515 to schedule a diagnostic.
In a North Lauderdale dual-fuel setup, yes, it often presents that way. The furnace and heat pump share the blower, the ducts, and in some configurations the same coil. A weak capacitor makes the blower run slow, so you feel cool air even when the furnace is firing correctly. A low refrigerant charge in the shared coil reduces heat transfer, and in some dual-fuel systems, the heat pump won’t change over properly. We check the shared components on every furnace repair call, because solving the furnace side alone doesn’t fix a system problem. That’s the difference between a parts-swapper and a technician who diagnoses the whole system.
If your furnace isn’t heating in North Lauderdale, don’t spend another night cold. Call Dalton Heating & Air at (361) 306-9515. You’ll reach a live person, get a straight answer, and have a written price before we start any work.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving North Lauderdale and the surrounding South Florida market.