Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Orlando
Most furnace repairs in Orlando run between $150 and $700, and a no-heat call in the middle of one of our 40-degree winter nights is something we treat as urgent. Dalton Heating & Air has been part of the Garrison Partners network since 2003, and every job we do in Orlando comes with a written price before any work starts, plus a written guarantee on the repair itself. If your furnace is short-cycling, blowing cold air, or refusing to fire at all, call (361) 306-9515 and you’ll get a live person, 24/7. We serve the whole metro, from Lake Eola to the neighborhoods off Sand Lake Road, and we show up inside the window we give you.
Why Dalton Heating & Air Is Orlando’s Preferred Furnace Repair Company
Orlando homeowners deal with a strange reality: the furnace barely runs most of the year, but when a cold front pushes overnight temps into the 40s, it has to work perfectly on short notice. That’s exactly the pattern our techs know from thousands of service calls across Orlando. We’re a Garrison Partners company, which means every repair follows The Garrison Standard: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Marco Benitez, who leads our Orlando operation, built the team’s reputation on one thing: doing what we said we would do. Background-checked, uniformed technicians show up for every call, and you’ll know who’s coming before they arrive. The work is guaranteed in writing for a full year through our 365-Day Done Right Promise. If a repair fails during that window, we return at no charge. Free second visit, no fine print, no argument. That’s the discipline most companies in Orlando don’t bother with.
For more on how we handle heating systems specifically, our Furnace Repair team covers everything from ignitor swaps to full heat exchanger evaluations.
Heat Pump Repair in Orlando
Heat Pump Repair is the most common heating call we run in Orlando, and for good reason: most homes here don’t have a gas furnace at all. They have a heat pump, and when it fails, it usually fails on the coldest night of the year. A heat pump repair in Orlando typically runs $150 to $650 depending on the part. Common failures include a failed reversing valve, a refrigerant leak at a braze joint, or a dead capacitor on the outdoor unit. When your heat pump won’t switch to heating mode, the fix usually comes down to one of those three things.
And here’s what most people don’t realize: a heat pump that runs fine in cooling mode can still fail as a heater. The reversing valve that swaps refrigerant flow between modes is a mechanical part, and in Orlando’s humidity, the coil it sits inside can corrode faster than it would in a drier climate. That’s why we always test both modes on a diagnostic visit, not just the one that’s acting up.
Reversing Valve and Refrigerant Diagnosis
When your heat pump won’t heat, the first thing we check is whether the reversing valve is actually reversing. If it’s stuck, the unit will blow cold air while the compressor runs. A sticking valve is sometimes repairable, but if the solenoid has failed, replacement is the fix. Either way, the price is in writing before a wrench comes out.
Defrost Cycle Problems in Humid Air
Orlando winters aren’t cold enough for heavy frost, but they’re humid enough that evaporator coils ice up on marginal nights. When the defrost control board or sensor fails, the coil ices over and the unit can’t move heat. That’s a $150 to $650 repair range in most cases, and it’s a job that gets misdiagnosed by companies that don’t work on heat pumps in Florida’s specific humidity.
Heating Repair in Orlando
Heating Repair in Orlando covers everything from a gas furnace that won’t ignite to a heat pump that’s short-cycling, and the cost range sits between $150 and $700 for most jobs. What surprises many homeowners is how often a heating failure traces back to a part that was stressed by months of disuse, not overuse. Orlando furnaces sit idle for most of the year, and that idle time lets dust settle on igniters, lets capacitors degrade, and lets small cracks in a heat exchanger go unnoticed until the system finally runs.
A proper heating diagnostic in Orlando starts with the sequence of operation, not a parts swap. We check the thermostat signal, the inducer motor, the pressure switch, the igniter, the flame sensor, and the gas valve, in that order. Most failures stop the sequence at a specific point, and finding that point tells us exactly what to fix. No guessing, no throwing parts at the problem and hoping.
Gas Valve and Igniter Diagnosis
Gas furnaces are less common in Orlando than heat pumps, but we service plenty of them in older neighborhoods like College Park and Winter Park. When the igniter glows but the gas valve never opens, the valve’s solenoid or internal regulator has failed. When the igniter doesn’t glow at all, it’s usually the igniter or the control board. Both fixes fall inside the $150 to $700 range for most Orlando homes.
Failed Blower Motor or Capacitor
This is the failure we see most from short-cycling: a furnace that fires for four minutes and shuts off, over and over, all winter. That stop-start pattern is brutal on blower motor capacitors. Replace the capacitor and the motor often runs fine. Replace the motor itself and you’re looking at the upper end of the repair range. Either way, you get the diagnosis in writing before you approve the work.
Trusted Brands We Service in Orlando
Dalton Heating & Air is factory-trained to service all nine major residential HVAC brands, and in Orlando we work on a lot of Rheem, Bryant, and York equipment, along with Daikin units that are common in newer builds around Lake Nona. We stock common parts locally for Orlando customers, which means a bad igniter or run capacitor doesn’t have to wait on a warehouse shipment from out of state. Whether your unit is a Bryant heat pump from the early 2000s or a newer Daikin inverter system, our techs know the wiring diagrams and the failure patterns for each brand.
Common Furnace Repair Problems We See in Orlando Homes
- Short-cycling from an oversized furnace. A furnace matched to peak summer AC load runs in 3 to 5 minute bursts all winter. That thermal cycling stresses the heat exchanger and kills igniters years before they’d fail in a colder climate.
- Blower motor and capacitor failure from constant on/off cycling. Orlando furnaces never reach steady-state runtime in mild winters, so the blower motor starts and stops more often than it was designed to. Start components fail first.
- Heat exchanger cracking that goes unnoticed. Because Orlando furnaces get so few annual run hours, homeowners skip fall tune-ups. Hairline cracks develop slowly and don’t show symptoms until a cold snap forces the furnace to run longer than it has in months.
- Igniter and flame sensor fouling from idle months. Dust and humidity settle on the igniter and flame sensor during the nine months the furnace sits off. The first cold night of the year, the furnace tries to fire and fails.
Pricing for Furnace Repair in Orlando, FL
Realistic numbers for the Orlando market, so you know what to expect before you call:
| Service | Typical Price Range |
|---|---|
| Furnace diagnostic and repair | $150 – $700 |
| Heating tune-up and safety check | $80 – $200 |
| Heat pump repair | $150 – $650 |
What moves a repair toward the top of that range: a failed blower motor, a cracked heat exchanger, or a gas valve replacement. What keeps it toward the bottom: a capacitor, igniter, flame sensor, or pressure switch. Every job gets the price in writing before work begins, and every repair is guaranteed in writing for a full year. Estimates are free. Call (361) 306-9515 and a live person answers, any hour.
We Also Serve Cities Near Orlando
Dalton Heating & Air handles furnace repair across the greater Orlando metro, and our techs are on the road in Winter Park, Maitland, Goldenrod, and Altamonte Springs every week. If you’re searching for Furnace Repair in Orlando but live just outside the city line, the same written pricing and 365-day guarantee apply. Call us and we’ll get you on the schedule with a real arrival window.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Orlando
Short-cycling is common in Orlando, but it’s not normal and it’s not harmless. It usually means the furnace is oversized for your home’s heating load, or the system is tripping a safety switch. In Orlando’s ASHRAE climate zone 2A, winter design temperatures rarely drop below the mid-40s, so a furnace that was sized for peak summer AC load runs in 3 to 5 minute bursts instead of long, steady cycles. That stop-start pattern cracks heat exchangers and kills igniters prematurely. A load calculation tells us whether the furnace is the wrong size, and the fix is often a simple repair rather than a replacement. Call (361) 306-9515 for a diagnostic in Orlando.
Most furnace repairs in Orlando run $150 to $700, while a replacement typically lands between $3,500 and $7,500 depending on efficiency and size. The honest guidance we give homeowners is this: if the repair is a capacitor, igniter, or flame sensor, fix it – those are wear parts. If it’s a cracked heat exchanger on a furnace more than 12 years old, replace it, because the repair cost is high and the safety risk is real. We’ll give you both numbers in writing and let you decide. Estimates are free.
A load calculation matters because Orlando furnaces are almost never sized for heating. Most were matched to peak summer cooling load, which means the heating side is oversized for what our mild winters actually demand. An oversized furnace short-cycles, and short-cycling is what kills heat exchangers and igniters. A proper Manual J load calculation tells us exactly how many BTUs your home needs in both heating and cooling, and that informs whether a repair is worth doing or whether the right move is a correctly sized replacement. This is the conversation most HVAC companies in Orlando never have.
In Orlando, address the heat pump first. It’s your primary heating source and it runs all summer as your AC. A heat pump repair runs $150 to $650 in most cases, and the sooner you catch a reversing valve or refrigerant issue, the less damage it does to the compressor. If you also have a gas furnace that’s acting up on the same system, we can diagnose both in the same visit and give you a written picture of what each repair costs. Then you decide what to do first.
SEER2 is the updated efficiency rating for heat pumps and AC units, and it matters more in Orlando than almost anywhere else in the country because your system runs for cooling most of the year. A higher SEER2 rating means a lower operating cost per BTU of heat moved, and when paired with the heating performance factor (HSPF2), it gives you a real sense of what the new unit costs to run in both seasons. In Orlando’s mild winters, the heating side of a heat pump is cheap to operate compared to what a gas furnace or electric strip heat would draw. We can run the numbers on a replacement proposal so you see the actual projected bill, not a sales pitch.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Orlando since 2003.