Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Florence
Furnace repair in Florence runs $150 – $700 for most jobs, and the price is in writing before we touch a single wire. That’s the way we work at Dalton Heating & Air, and it’s why homeowners between FM 970 and the Williamson County line call us instead of rolling the dice on a technician who might show up, might not, and might change the price at the door. We answer our phones 24/7 with a live person, and our crews know Florence well enough to reach you inside a normal response window, not some vague “sometime tomorrow.” If your furnace is short-cycling, tripping the high-limit switch, or just not keeping up on the coldest nights of a Central Texas winter, call (361) 306-9515. We’ll get someone out to Florence, give you a written price, and if we say it’s fixed, it stays fixed for a full year.
Key Takeaways for Florence Homeowners
- Full-year guarantee: Every repair carries the 365-Day Done Right Promise. If it fails inside that window, we return at no charge.
- Price in writing first: No verbal ballpark. You get a line-item price before work begins, always.
- We service nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard.
- Real load calculations, not square-footage guesses: Oversized furnaces are the single biggest cause of the short-cycling failures we see in Florence’s older ranch homes.
- Live person on the phone, day or night: No answering service script, no voicemail queue. Call (361) 306-9515 and a human picks up.
Why Dalton Heating & Air Is Florence’s Preferred Furnace Repair Company
Homeowners in Florence care less about advertising and more about whether the technician actually knows what he’s doing. Our team is factory-trained on nine major HVAC brands, and every one of our techs works under The Garrison Standard, a set of operating rules we’ve followed since 2003 as a Garrison Partners company. That standard means we show up inside the stated window, put the price in writing before starting, do the job by the code, leave your utility room cleaner than we found it, and stand behind the work for a full year. Most companies will tell you they guarantee their work. We write it down and sign it.
Florence is a smaller market, and word gets around. Surrounding communities like Liberty Hill and Georgetown have their own contractors fighting for attention, but homeowners from Florence to Cedar Park call us because our reputation follows the tech, not the truck. Our background-checked, uniformed technicians are dispatched from our DFW coordination office, which means you get a real arrival window, not “sometime this afternoon.” That coordination matters in Florence, where a repair call on the north side of town near County Road 245 and a call down off FM 970 can be 20 minutes apart. We plan the route, and we tell you when to expect us.
Marco Benitez, who leads our team, has a simple rule about promises: don’t make one you won’t keep in writing. That’s why every repair call includes the price before we start, a written guarantee, and a free second visit if the repair fails. If the work isn’t done right, the 365-Day Done Right Promise says we make it right. That’s not a marketing slogan. That’s the backbone of how we operate in Florence.
Heat Pump Repair in Florence
Heat Pump Repair in Florence is a different animal from furnace repair, and a lot of north Williamson County homes straddle both. A heat pump heats and cools from one unit, which means the compressor, reversing valve, and electric heat strips all have to work together. When a Florence homeowner’s heat pump blows cold air on heat mode, the problem is usually a stuck reversing valve, low refrigerant charge, or a failed defrost board. Most heat pump and heating repair calls in Florence run $150 – $650 depending on the part. Duct static pressure causes more heat pump failures here than people realize – undersized ductwork in older Florence ranch homes backs up airflow, which starves the indoor coil, which trips the high-pressure switch. It looks like a dead compressor and turns out to be a $250 duct repair.
Reversing Valve and Refrigerant Diagnostics
When a Florence heat pump can’t switch between heating and cooling, the reversing valve is the first thing we test. Our techs carry refrigerant gauges and proper equipment for checking charge on-location, not after scheduling a second visit. On propane or dual-fuel setups, we’ll also confirm the furnace backup is staged correctly so you’re not burning expensive propane at 40 degrees when the heat pump would handle it fine.
Electric Heat Strip Failures in Dual-Fuel Homes
Many Florence homes with propane furnaces also have a heat pump or straight-cool AC with electric heat strips. When the strips fail, the house isn’t warm enough and the thermostat gets blamed. We test amp draw on each strip, check the sequencer, and replace only what’s failed. The repair is guaranteed in writing for a full year, not a 30-day window.
Heating Repair in Florence
Heating Repair in Florence means more than just furnaces. It’s propane furnaces, dual-fuel setups, heat pumps, and the occasional electric resistance air handler, all responding differently to Central Texas winters where design temps still dip into the low 20s while daytime highs swing back into the 50s and 60s. That temperature swing is rough on equipment because your system cycles hard at night and barely runs by afternoon. Most heating repair calls in Florence are diagnosed and fixed same-day for $150 – $650. Ignitors, flame sensors, gas valves, blower motors, control boards – we replace them all, and the part goes into the written estimate before we start.
Ignitor and Flame Sensor Replacement
Propane furnaces burn dirtier than natural gas, and that shows up as carbon buildup on the flame sensor and premature ignitor failure. A furnace that fires then shuts off inside 30 seconds is usually a flame sensor that can’t prove flame, not a major breakdown. In Florence, where many homes run propane or dual-fuel outside city gas lines, we replace ignitors and flame sensors as separate components, so you’re not paying for a control board you don’t need.
Blower Motor and Capacitor Diagnostics
A furnace that runs but doesn’t push air, or one that trips the high-limit switch every few cycles, often has a failing blower motor or a weak capacitor. We test static pressure, check amp draw, and replace the component that failed. That’s a $150 – $300 repair, and if your Carrier or Goodman unit just needs a capacitor, the fix is inside an hour.
Trusted Brands We Service in Florence
Dalton Heating & Air services all nine major residential HVAC brands, and that matters when you’re calling about a 12-year-old Daikin furnace or a dual-fuel Goodman system off FM 970. We carry ignitors, flame sensors, capacitors, pressure switches, and blower motors for Rheem and York units on our trucks heading to Florence, so we’re not making you wait three days for a common part to ship from Dallas. If your existing furnace is a Daikin or a Rheem and the heat exchanger passes inspection, we’ll repair it at the component level. If the heat exchanger is cracked, we’ll show you the crack, give you a written replacement price, and help you decide with real numbers. For Florence homeowners, “we service all brands” isn’t a flex. It’s the difference between a warm house tonight and another night with the gas fireplace running.
Common Furnace Repair Problems We See in Florence Homes
- Short-cycling from oversized equipment: Florence’s mix of older ranch homes and newer builds means lots of furnaces were sized on square footage instead of a real load calculation. An 80,000 BTU furnace in a 1,400 square foot ranch off County Road 245 will cycle for 8 minutes, trip the high-limit switch, and leave two bedrooms cold. Short-cycling from oversizing is the most common local failure we diagnose.
- High-limit switch trips from airflow restriction: A choked filter or a failing blower motor makes the furnace overheat and trip the high-limit. Homeowners hear the furnace running, then it shuts off, then it restarts. That’s the furnace telling you it can’t move air. The fix is often a filter, a blower motor, or a static pressure correction – not a new furnace.
- Propane flame sensor fouling and ignitor burnouts: Florence’s propane and dual-fuel homes see more flame sensor fouling than natural gas homes. Carbon builds on the sensor, the furnace can’t prove flame, and it locks out. An ignitor that glows but won’t light, or won’t glow at all, is a $150 – $250 repair. We keep both parts on the truck.
- Weak capacitors and failing blower motors on older systems: A 15-year-old furnace in Florence with the original blower motor will draw high amps, overheat, and shut down mid-cycle. The symptom looks like “the furnace died.” The diagnostic is five minutes with an amp probe. The repair is $150 – $300 for a capacitor or $400 – $700 for a motor – far less than a replacement install.
Pricing for Furnace Repair in Florence, TX
A straight diagnostic visit in Florence runs $80 – $200, and that fee is applied toward the repair if you proceed. Most actual furnace repairs land between $150 and $700 depending on the component. Below is the line-by-line price table we work from, and we don’t pad it.
| Service | Typical Range (Florence) |
|---|---|
| Furnace repair (diagnostic + common part replacement) | $150 – $700 |
| Heat pump / heating repair call | $150 – $650 |
| Seasonal tune-up (furnace or heat pump) | $80 – $200 |
| Furnace / system replacement (load calc + install) | $3500 – $7500 |
The final number depends on the part, the brand, and the age of the unit, but you’ll see the total on a written estimate before we start. There’s no “well, it’s going to be more than I thought” conversation at the end. Call (361) 306-9515 for a free estimate. We’ll tell you the range over the phone, and the exact price in writing before any work.
What Actually Matters When You’re Deciding Repair vs. Replace in Florence
Florence sits in a pocket of Central Texas where winter design temps still dip into the low 20s. There’s no dominant “cold city” identity here, so furnaces often get treated as an afterthought until the first hard freeze. The practical result is that many Florence homes are living with furnaces that were never sized correctly in the first place – installed to the square footage on a previous owner’s word, not to a real heat-load calculation. On a dual-fuel or propane setup outside city gas, an honest repair-versus-replace decision comes down to three things: the condition of the heat exchanger, whether the existing tonnage actually matches the house, and what the efficiency numbers mean on your actual bill. We don’t sell furnaces by gut feel. We run the load calculation, check the duct static pressure, and then tell you what’s true.
Here’s an example from the field, from our own tech. He pulled up to a ranch-style home off FM 970 where the homeowner’s 15-year-old Carrier furnace was short-cycling and tripping the high-limit. The homeowner was sure the unit was dead and was bracing for a $5,000 replacement quote. Our tech ran a static pressure reading, found a choked filter and a blower motor drawing high amps, and then inspected the heat exchanger. It passed. No cracks, no rollout. We replaced the blower motor and capacitor, cleaned up the airflow, and the customer stayed under the $700 repair ceiling instead of stepping into a $3,500-plus install they didn’t need. That’s what doing it by the book looks like. Not selling a new furnace because it’s easier.
If your propane furnace is 15 years old and the repair estimate is $600, the math gets tighter. We’ll show you the condition of the heat exchanger. If it’s cracked, the replacement conversation is legitimate, and we’ll give you a written $3,500 – $7,500 install range that includes a proper load calculation. If it’s not cracked and the rest of the system is sound, you’re better off with the repair and a free second visit should the work fail inside the year.
We Also Serve Cities Near Florence
If you’re searching for Furnace Repair anywhere in north Williamson County, Dalton Heating & Air covers the whole area. Our Florence customers come from Liberty Hill, Georgetown, Leander, and Cedar Park, and the same written-pricing and full-year guarantee apply in every one of those places. Dispatch is coordinated from our DFW office, and crews serve each community locally.
Serving Florence, TX - Our Local Coverage Area
We’re based in the Florence area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Florence
We run a real load calculation – Manual J, not a square-footage guess. In Florence, where older ranch homes and newer builds sit side by side, oversized furnaces are the single biggest cause of short-cycling and high-limit trips. Load calculation accounts for window orientation, insulation, ceiling height, and building envelope, not just floor area. If your current furnace was sized by square footage, we’ll show you the difference between what you have and what the house actually calls for. That’s the only way to stop a furnace from cycling too often and leaving rooms cold.
If the heat exchanger passes inspection and the compressor or blower isn’t failing, the $600 repair is the right call. A new system is a $3,500 – $7,500 investment, and the point of a heat exchanger inspection is to keep you from pouring money into a furnace with a carbon-monoxide risk. If the heat exchanger is cracked, we’ll recommend replacement and show you the crack. If it’s intact, the repair gets the full-year guarantee, and our free second-visit promise covers you if it fails.
SEER2 is a cooling-efficiency rating measured under real-world duct pressure conditions. In Florence, where ductwork in older homes is often undersized, a higher SEER2 rating on paper can be undercut by duct static pressure that forces the system to work harder. A 15-SEER2 unit on tight ductwork won’t hit its advertised efficiency, and the difference shows up on the bill. When we replace a system in Florence, we measure static pressure and address ductwork before quoting. Otherwise, you’re paying for an efficiency number the house can’t deliver.
Yes. We service furnaces, heat pumps, dual-fuel systems, and straight-cool AC units. Florence has a lot of propane and dual-fuel configurations outside city gas, and our techs are trained on all nine major residential brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. A heat pump that fails in winter is a heating emergency; a furnace that fails is too. We respond to both with the same written pricing and same-year guarantee.
Once a year, before the first real cold snap in late November or early December, and yes, it’s worth it in Florence. The winter design temp can hit the low 20s, but daytime highs in the 50s and 60s means your system cycles hard at night and barely runs all day. A $80 – $200 tune-up catches a failing capacitor, a dirty flame sensor, or a blower motor drawing high amps before they become a $400 – $700 mid-January repair. Our techs are paid on the work performed, not on what they sell, and you get a written report of what was actually found.
Ready to Get Your Furnace Fixed in Florence?
Call Dalton Heating & Air at (361) 306-9515 for a free estimate on furnace repair in Florence. The price is in writing before we start. The repair is guaranteed in writing for a full year. If it fails, we come back free. That’s how we’ve worked since 2003, and it’s how we’ll work on your call.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Florence with The Garrison Standard since 2003.