Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Florence
A new Florence AC Repair heat pump installation typically runs $3,500 to $7,500 for a full system, depending on the size of your home and the efficiency level you choose. Most installs are scheduled within a few days to two weeks, not months. We answer the phone around the clock at (361) 306-9515 with a real person on the other end. No voicemail queue before a heat wave hits and your system quits.
Florence sits in a unique spot in Central Texas. Summer design temperatures push 100°F while winter lows dip into the upper 20s. That means a heat pump here has to handle a wide dual-load swing, not a single seasonal peak. The crew at Dalton Heating & Air knows what that swing does to equipment and what it means for sizing. We also know the roads out here: FM 487, the residential streets feeding off it, the acreage properties closer to Williamson County line, and the older homes closer to downtown Florence. When you call, we know exactly where you are and how fast we can get to you.
Every installation starts with a written price before any work begins. That’s The Garrison Standard, and it’s been the operating rule since 2003. Marco Benitez runs the team, and he holds every crew to the same five-point Garrison Code: arrive inside the window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. No exceptions.
Why Dalton Heating & Air Is Florence’s Preferred Heat Pump Installation Company
We’re not the new kid guessing at Florence’s loads and soil conditions. We’re part of a Garrison Partners network that started in 2003, and every Florence job is covered by the 365-Day Done Right Promise. If it’s not done right, we make it right. Most contractors talk about guarantees. We put ours in writing, on every installation, without making you ask.
Reviews from Florence homeowners tend to mention the same three things: the written price matched the final bill, the crew showed up inside the window, and the site was cleaner when we left than when we arrived. Background-checked, uniformed technicians come on every call. You’ll know the name of the person at your door before they ring the bell. That matters when you’re letting someone into your home for a day-long installation.
Response time to Florence for non-emergency service calls is usually same-day or next-day, depending on the season. We coordinate dispatch from our Dallas-Fort Worth office, but crews live and work in the Florence area. That means shorter drive times and a faster answer when your heat pump stops heating or cooling. Learn more about how we serve Heat Pump Installation in Florence across Williamson County.
Factory-trained techs service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. You won’t wait days for a part to ship from a distributor. We stock common components locally and can pull from regional supply houses the same day.
Ductless Heat Pump Installation in Florence
Ductless Heat Pump Installation in Florence is a practical fix for older homes without existing ductwork, converted garages, workshop spaces, and room additions where running new duct isn’t feasible. A ductless mini split gives you zoned heating and cooling without the cost and mess of tearing into walls or ceilings. Most ductless installs in Florence run between $3,500 and $7,500 depending on the number of indoor heads and the outdoor unit’s tonnage.
We see a lot of Florence homes set back off FM 487 with detached garages or workshop buildings that never got proper HVAC. A ductless system fixes that without a major renovation. You get a small outdoor condenser and a wall-mounted indoor unit, connected by a small line set that only needs a three-inch hole in the wall. The installation is cleaner than a traditional ducted system, and the zoned control means you’re not paying to cool a shop you’re not using.
Sizing and Placement for Central Texas Heat
A ductless unit that’s undersized will run constantly in July and still fall behind. One that’s oversized will short-cycle, spike humidity, and chew through electricity. We run a real load calculation on every ductless install, even for a single-zone garage unit. That’s the difference between a system that lasts twelve years and one that strains its compressor in five.
Placement matters too. Outdoor units need to sit on a stable, leveled pad. Florence’s clay and limestone soils heave and settle with the seasons. We compact the base before setting the condenser so the pad doesn’t drift and kink the line set.
Popular Configurations
Single-zone systems are the most common for detached workshops and room additions. Multi-zone systems work well when a Florence homeowner wants to cool two or three rooms without ductwork. Either way, you get a quiet unit, a wireless controller, and honest guidance on how many BTUs your space actually needs.
Heat Pump Service in Florence
Heat Pump Service in Florence means diagnosing and repairing existing heat pump equipment before a small issue turns into a full system failure. Most heat pump repairs run $150 to $650 depending on the component. That includes capacitor replacements, refrigerant work, fan motor swaps, thermostat calibration, and condenser coil cleaning. If you need auxiliary or emergency heat repair on the furnace side, repairs usually run $150 to $700. Our Heat Pump Installation team handles both service and full replacements, so you’re not bouncing between companies.
Florence’s humid spring and fall shoulder seasons put a unique strain on heat pumps. The system runs in cooling mode during the day and heating mode overnight. That constant cycling wears on reversing valves and capacitors faster than a system that runs one mode all season. We recommend a tune-up twice a year, once before summer and once before winter, to catch those wear items early. A tune-up runs $80 to $200.
When a repair makes sense, you get a written price before we touch anything. If the repair fails within the guarantee period, we return at no charge. That’s not an upgrade. It’s the standard.
Emergency Calls and No-Heat / No-Cooling Situations
If your heat pump quits during a July afternoon when it’s 102°F outside, that’s an emergency. Same with a January morning in the upper 20s when the auxiliary heat won’t kick on. We prioritize those calls. Live phone support is staffed 24/7 by a real person. The technician dispatched to Florence will bring the common failure parts with them so you’re not waiting on a second trip.
Annual Tune-Ups and Written Reports
A written report comes with every tune-up. It lists what we tested, what we found, what’s fine, and what’s wearing. Our technicians are not paid on what they sell, so the report is a straight read on your equipment. If something needs attention, we’ll show you and quote a price in writing. If it can wait, we’ll tell you that too.
Trusted Brands We Service in Florence
We service and install Trane, Lennox, Goodman, and Rheem heat pumps, along with Carrier, Bryant, York, Daikin, and American Standard from our nine-brand support network. Florence homeowners often have older Trane or Goodman units from the mid-2000s still limping along, and we keep common replacement parts for those locally. A compressor issue on a ten-year-old Trane shouldn’t mean waiting four days for a part. We pull from regional supply houses the same day so your repair doesn’t stretch into next week.
Common Heat Pump Installation Problems We See in Florence Homes
- Oversizing the heat pump for Florence’s dual heating/cooling load. A contractor who sizes by square footage instead of a real load calculation often puts in a larger unit than the home needs. The result is short cycling, humidity problems in Austin-adjacent spring and fall shoulder seasons, and a system that dies young.
- Ignoring pad stability on Florence’s shrink-swell clay and limestone. A condenser pad that settles or heaves can kink refrigerant lines and throw off the refrigerant charge. The compressor strains, and the homeowner gets told the equipment is failing when the real problem is the dirt underneath it.
- Skipping static pressure testing during installation. Many Florence homes, especially the older ones, have flex duct runs that leak or pinch. A new high-SEER2 heat pump will never deliver its rated efficiency if the duct system fights it. We test static pressure on every install.
- Replacing a unit when a repair would’ve bought another two or three seasons. We had a homeowner off FM 487 near Florence High School whose ten-year-old Carrier heat pump was short-cycling in July. Another company quoted a full replacement. Our tech found a struggling capacitor and an undercharged system. After correcting the charge and replacing the capacitor, the unit ran fine. We only recommended replacement the following season when the heat exchanger showed actual stress. The homeowner saved thousands.
Pricing for Heat Pump Installation in Florence, TX
Heat pump installation costs in Florence depend on system size, efficiency rating, and whether ductwork changes are needed. A full system install typically runs $3,500 to $7,500. Ductless mini splits fall in the same range depending on zone count. Repairs run $150 to $650 on the heat pump side and $150 to $700 on the furnace or auxiliary side. Annual tune-ups run $80 to $200. Here’s the breakdown:
| Service | Florence Price Range |
|---|---|
| Heat Pump Installation (full system) | $3,500 – $7,500 |
| AC Repair (heat pump) | $150 – $650 |
| Furnace Repair (heat pump auxiliary/emergency heat) | $150 – $700 |
| Tune-Up | $80 – $200 |
You’ll get a written fixed price before any work begins. Not an estimate that shifts at the door. Every installation includes the 365-Day Done Right Promise. Call (361) 306-9515 for a free estimate.
We Also Serve Cities Near Florence
Dalton Heating & Air handles heat pump installation and service for homeowners in Florence and the surrounding area, including Liberty Hill, Georgetown, Leander, and Cedar Park. Same crews, same written pricing, same full-year guarantee. Wherever you are in the northern Williamson County corridor, we’re close.
Serving Florence, TX - Our Local Coverage Area
We’re based in the Florence area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Florence
At 12 years old, the answer is usually repair-first if the repair is under $600 and the compressor, coil, and heat exchanger are in good shape. A heat pump in Florence that’s been through a decade of 100°F summers and 28°F winters still sometimes has two or three good seasons left with a simple fix. But if the repair bill approaches half the cost of a new system, or if there’s a refrigerant leak in the coil, replacement starts making more sense. We’ll show you the numbers for both options in writing and let you decide without pressure. Call (361) 306-9515 for an honest assessment.
No, and in many cases it’s the other way around. Florence rarely stays below 20°F for long, so a modern cold-climate heat pump operates efficiently through most of our winter. The dual-load design of newer heat pumps means one system handles both the 100°F cooling days and the upper-20s heating nights. A separate furnace and AC pair often costs more to run across a full year. The real efficiency killer in Florence isn’t the heat pump itself. It’s improper sizing and leaky ductwork.
A load calculation, usually a Manual J, sizes the system based on your home’s actual heat gain and heat loss, not square footage or rule-of-thumb guesses. In Florence, where the design temperature swing runs from about 100°F in summer to the upper 20s in winter, getting the tonnage right matters more than in a milder market. An oversized system short-cycles, traps humidity, and wears out components early. An undersized one can’t hold temperature on a July afternoon. We run the calculation before recommending any equipment. Call (361) 306-9515 to schedule a free estimate that starts with real numbers.
A full heat pump installation in Florence typically costs $3,500 to $7,500. The range reflects system capacity, efficiency level, and whether ductwork repairs or changes are needed. Ductless mini split installs fall in the same range depending on how many indoor zones you need. You’ll get a written fixed price before any work starts, and that price includes the full-year guarantee. No surprises at the door. Call (361) 306-9515 for a specific quote.
A season-specific tune-up twice a year is the baseline. Before summer, the technician should check refrigerant charge, clean the condenser coil, test the capacitor, and inspect electrical connections. Before winter, the focus shifts to the reversing valve, auxiliary heat strips, and defrost cycle. Florence’s clay-heavy soil means the outdoor pad should also be checked for settling or heaving each visit. A tune-up runs $80 to $200 and includes a written report. Call (361) 306-9515 to get on the schedule before the next heat wave.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Florence, TX and the surrounding Williamson County area.