Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Conway
Furnace repair in Conway typically runs $150 – $700 depending on the part that failed, and most calls are diagnosed the same day we arrive. Conway’s humid subtropical climate means furnaces here sit idle through seven or eight months of cooling season, so failures follow a pattern we know well: heat exchangers that crack from heat-cycling after long dormancy, blower motors that seize from humidity and lack of use, and capacitors that finally quit the first cold morning. We answer calls from Conway homeowners 24/7 and dispatch a background-checked technician to your door. Call (361) 306-9515 for a diagnosis.
Key Takeaways
- Most furnace repairs in Conway run $150 – $700, with the written price in your hand before any work starts.
- Conway’s long cooling season creates a specific failure pattern: components corrode or seize during the off months, then fail on first demand.
- Every repair includes a written one-year guarantee and a free return visit if the work doesn’t hold.
- We service Rheem, York, Daikin, and Bryant equipment, plus the other major residential brands, with local part sourcing for fast turnaround.
Furnace problems in Conway don’t announce themselves politely. They show up as a cold house on a 38-degree morning, a burning smell from the vents, or a system that won’t stop running. Our Furnace Repair team is on call around the clock, because no heat in a Florida home isn’t just uncomfortable – it’s a family health issue when the temperature drops and the humidity makes everything feel colder.
Why Dalton Heating & Air Is Conway’s Preferred Furnace Repair Company
Homeowners in Conway have called us enough times to know the drill: a live person answers the phone, we give you an arrival window and show up inside it, and the price goes in writing before a single panel comes off the unit. Dalton Heating & Air operates under The Garrison Standard, a set of non-negotiable terms in place since 2003. That means every Conway repair carries a written guarantee for a full year. If the repair fails in that time, we return at no charge. Not a pro-rated credit. A return visit that costs you nothing.
Marco Benitez leads our operations with a simple rule: do the job by the book and leave the site clean. Technicians are background-checked, uniformed, and factory-trained on nine major residential HVAC brands, including the Rheem, York, Daikin, and Bryant systems common in Conway homes. We’re not a call center that dispatches whoever’s nearest. You’ll know the tech’s name before they arrive.
Dispatch and scheduling for Conway are coordinated from our South Florida metro office, with local crews serving the area directly. That structure gives you a real person on the phone at 2 a.m. and a technician who knows Conway’s housing stock, from the mid-century ranches off Hoffner Avenue to the newer builds near Barber Park.
Heat Pump Repair in Conway
Heat pump repair in Conway is a different discipline than furnace work in colder markets, because your heat pump is doing double duty all year. In winter, it reverses its refrigeration cycle to pull heat from outdoor air and push it indoors. The parts that wore thin during a long Orlando-area cooling season – the reversing valve, the capacitor, the compressor contactor – are the same parts that fail when the system shifts into heating mode. A heat pump repair here generally runs $150 – $650, with the written price determined by the specific component and the time on the job.
Reversing Valve and Defrost Board Failures
When a Conway heat pump blows cold air in heating mode, the reversing valve is often stuck or the defrost board isn’t cycling correctly. The valve sits in cooling position for months at a time. On the first sustained cold snap, it may refuse to shift. We test the valve, check the solenoid voltage, and replace the board or valve only if the diagnosis holds.
Capacitor and Contactor Replacement
Capacitors give the compressor and fan motors their starting jolt. In Conway’s humidity, a capacitor that was marginal through summer heat will fail outright the first time the system demands heating output. We keep common capacitor and contactor ratings on our trucks, so the fix is usually done in one visit.
Electric Heat Strip and Aux Heat Diagnosis
If your thermostat keeps showing “aux heat” or “emergency heat” on a Conway morning, the heat pump may be locking out and relying on electric resistance strips. That’s expensive to run. We trace the lockout, fix the underlying refrigeration or airflow problem, and get the strips cycled off so you’re not paying triple the normal heating cost.
Heating Repair in Conway
Heating repair in Conway covers gas furnaces, electric furnaces, and the heating side of heat pump systems. The common thread is that most systems here sit dormant through a long humid season and then get asked to perform on the first cold morning. We see a different failure signature than a Minneapolis tech would: not worn bearings from constant use, but corrosion, seized blower motors, and heat exchanger cracks from expansion-contraction cycles. Heating repair in Conway runs $150 – $700 depending on the component and the system type.
Blower Motor and Fan Assembly Service
Conway’s humidity does real work on a blower motor that isn’t turning for months at a time. Bearings lose lubrication, shafts develop surface rust, and the first call for heat becomes a locked-rotor condition. We check amp draw before condemning the motor, because sometimes it’s a start capacitor or a relay giving the same symptom.
Heat Exchanger Inspection and Repair
Cracked heat exchangers in Conway furnaces are typically a dormancy problem. The metal expands when the burner fires after months of sitting cold in a humid cabinet, and contracts when the system shuts down. That cycle stresses the seams. We use a combustion analyzer and inspection mirror to check for cracks, and we’ll show you what we see. If the exchanger is compromised, we’ll tell you straight whether repair or replacement is the honest call.
Trusted Brands We Service in Conway
Our technicians are factory-trained on nine major residential HVAC brands, and in Conway we service a lot of Rheem, York, Daikin, and Bryant equipment. We stock common parts for these brands locally, which cuts the turnaround when your system goes down. If your furnace is a Trane, Lennox, Goodman, Carrier, or American Standard, we’re certified on those as well. The brand on the cabinet doesn’t change our process: written price before work starts, written guarantee when it’s done.
Common Furnace Repair Problems We See in Conway Homes
- Heat exchangers cracked from dormancy cycling. The metal sits cold and damp for months, then fires hot on the first cold snap. The expansion and contraction stresses the welds and seams. We see this in gas furnaces all over Conway, especially in older homes near Lake Margaret Drive.
- Blower motors seized from off-season humidity. When a blower doesn’t spin for eight months in Florida humidity, bearings dry out and shafts oxidize. The first heating call becomes a locked rotor, often mistaken for a dead thermostat. We test amp draw before replacing anything.
- Weak capacitors failing at heat pump reversal. A capacitor that was marginal all summer will fail when the reversing valve shifts into heating mode. The symptom is a tripped breaker and no heat. We keep common capacitor values on the truck for a same-visit fix.
- Gas valve and ignitor failures in electric-furnace conversions. Many Conway homes have hybrid gas-electric setups, and the gas valve or ignitor can fail from disuse just like anything else. A spider nest in the burner tube is also a real Conway problem, given the insect activity here.
Pricing for Furnace Repair in Conway, FL
We give a written price before any work begins, every time. Here’s what the ranges look like in Conway’s market:
| Service | Typical Conway Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Heat Pump Repair | $150 – $650 |
| Furnace Tune-Up | $80 – $200 |
What pushes a furnace repair toward the top of that range is usually the part itself: a blower motor assembly costs more than a flame sensor, naturally. A repair that needs two visits because a part isn’t on the truck is what we avoid by stocking common components locally. You won’t get a lowball number to get us in the door and a higher one after we open the cabinet. The price you see in writing is the price you pay. Call (361) 306-9515 for a free estimate on any furnace repair in Conway.
We Also Serve Cities Near Conway
Our Furnace Repair in Conway service area extends to the surrounding communities. We run calls to Jacksonville, Miami, Tampa, and Orlando from the same dispatch system, with Conway receiving local crew priority. If you’re just outside Conway proper, give us a call and we’ll confirm coverage.
Serving Conway, FL - Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Conway
That usually means the reversing valve is stuck in cooling position, the defrost board isn’t cycling, or the system has locked out and fallen back to aux heat. In Conway’s climate, we most often see a valve that sat in cooling mode for months and won’t shift on the first cold call. The fix may be a solenoid check, a board replacement, or in some cases a valve replacement. Call (361) 306-9515 and we’ll diagnose it today.
If your furnace is under 12 years old and the failed part is a capacitor, ignitor, or gas valve, repair is usually the honest call. If the heat exchanger is cracked or the blower motor is beyond service and the system is over 15 years old, we’ll lay out the numbers for both paths and tell you what we’d do in your position. The decision starts with an accurate diagnosis, not a sales pitch.
A load calculation (Manual J) measures your home’s square footage, insulation, window orientation, and duct condition to determine the right heating capacity. In Conway, many older homes were built with systems sized for cooling load, not heat. That matters when a furnace fails: replacing a dead system with the same oversized unit instead of one sized correctly is a missed opportunity. We run the numbers before recommending replacement.
SEER2 is the updated efficiency rating for cooling performance on heat pumps and AC systems, effective in 2023. In Conway’s climate, the cooling rating matters more than the heating efficiency rating (AFUE for furnaces, HSPF2 for heat pump heating), because your system runs in cooling mode far more hours per year. A higher SEER2 number means lower cooling bills through Conway’s long summer, which is where the real savings live. We’ll show you the difference in dollars, not just ratings.
That’s accumulated dust burning off the heat exchanger and electric elements after months of disuse – common in Conway homes giving their furnace its first run since spring. It should clear within an hour. If the smell persists or you smell gas, turn the system off, don’t light any flames, and call us immediately at (361) 306-9515.
If your furnace isn’t heating and you’re in Conway, call (361) 306-9515. We answer live, 24/7, and we’ll give you a straight diagnosis and a written price. Marco Benitez and the Dalton Heating & Air team built this operation on the simple principle that a repair should be done right, priced before work starts, and guaranteed in writing for a full year. That’s The Garrison Standard, and it applies to every call we run in Conway.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Conway since 2003.