Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Converse
Furnace repair in Converse, TX typically runs $150 – $700, and most no-heat calls we handle are first-run-of-the-season failures, not mid-winter breakdowns. Converse sits in a pocket of Bexar County where the same system has to survive short, sharp freezes like Winter Storm Uri and long 100°F-plus summers. A furnace that barely runs from March through November is exactly the one that refuses to fire on the first cold morning. If your heat is out in Converse right now, call (361) 306-9515. A live person answers, and we’ll get a background-checked technician to your door today.
Why Dalton Heating & Air Is Converse’s Preferred Furnace Repair Company
Homeowners across Converse call us because we put the price in writing before any work starts. No “we’ll see when we get there.” No shift at the door. That discipline comes from The Garrison Standard, which has governed every Dalton Heating & Air job since 2003. Marco Benitez, who leads our team, holds every technician to The Garrison Code: arrive inside the stated window, price the job in writing, do the work by the book, leave the site clean, and stand behind it for a full year.
Our Furnace Repair team serves Converse directly, with dispatch coordinated from the San Antonio metro office. That means we can typically reach homes near Converse City Park, along FM 78, and through the 78109 ZIP within a short drive. Reviews from Converse customers consistently mention the same things: the tech showed up on time, the price stayed put, and the repair held through the next freeze. We carry parts for Trane, Lennox, Goodman, and Rheem on the truck, so a lot of repairs are finished in a single visit.
Every repair includes a written guarantee. If the same problem returns inside the guarantee window, we come back at no charge. That’s the 365-Day Done Right Promise, and it’s not an upsell. It’s just how we’ve operated for over 20 years.
Heating Repair in Converse
Heating Repair in Converse often means reviving a furnace that has sat dormant since the previous March, then finding it won’t light on the first morning the thermometer dips. The most common culprits we see are weak capacitors, dirty flame sensors, and failed ignitors. These are not furnace-killing problems. In most cases, the job takes under two hours, and the price lands in the $150 – $450 range before any surprises. A heat exchanger crack will push that higher, which is why we inspect it on every call.
First-Cold-Snap Ignition Failures
A furnace that sat unused through a Converse summer often won’t fire when the first freeze hits. The problem is usually a capacitor that lost its charge or a flame sensor coated in soot. We clean or replace the part, verify the gas pressure, and run the system through a full cycle before we leave. You’re not buying a new furnace for what is almost always a $150 – $300 fix.
Heat Exchanger Safety Checks
If your furnace is older, we’ll inspect the heat exchanger with a camera before anything else. On older Goodman and York units in Converse, we’ve found cracks that the homeowner never suspected. A cracked heat exchanger can leak carbon monoxide into the house, so this is a safety call, not a sales pitch. If it’s cracked, we’ll show you a photo and discuss the repair-versus-replace math honestly.
Boiler Repair in Converse
Boiler Repair in Converse is less common than furnace work, but the homes that have hydronic heat in this area tend to be older builds where the boiler has been in service for years. If your boiler is short-cycling, making banging sounds, or leaving radiators cold in one room while another gets too hot, that’s a circulation or air-lock problem more often than a dead unit. Repair costs for these systems usually fall between $150 and $700, depending on whether we’re replacing a circulator pump, a zone valve, or an expansion tank.
Radiators Not Heating Evenly
When one room in a Converse home stays cold while the rest of the house warms up, the boiler usually isn’t the problem. Air trapped in the lines or a failing zone valve prevents hot water from reaching that loop. We bleed the system, replace the valve if needed, and verify water pressure at the expansion tank. Most of these calls are resolved in a single visit.
Boiler Short Cycling
A boiler that fires, shuts off, fires again, and repeats is not running efficiently. In Converse homes with older hydronic systems, this often points to a clogged condensate trap or a faulty aquastat reading the water temperature wrong. Both are repairable without replacing the boiler itself. We’ll put the exact diagnosis and price in writing before any work begins.
Trusted Brands We Service in Converse
Our technicians are factory-trained to service nine major residential HVAC brands, and in Converse we see a lot of Trane, Lennox, Goodman, and Rheem equipment in the field. That training matters because a Trane gas valve and a Goodman gas valve do not fail the same way, and the right diagnosis saves you money. For Converse customers specifically, we stock common repair parts locally instead of waiting on a parts house in another county. Fast turnaround on the most common failures means fewer cold nights waiting. If your system is one of those four brands and you’re in Converse, there’s a strong chance the part is already on the truck.
Common Furnace Repair Problems We See in Converse Homes
- Seasonal start-up failures: Converse furnaces idle for months between April and October. On the first freeze, weak capacitors and dirty flame sensors show themselves immediately. These are repairable for $150 – $300 in most cases.
- Oversized cooling equipment paired with undersized heating: Many Converse homes were sized for AC tonnage during the builder years, and the heating side never got a proper load calculation. That’s why some furnaces short-cycle through mild cold snaps and still underheat on hard freezes.
- Heat exchanger cracks on older units: We inspect heat exchangers on every call, and on Goodman and York furnaces from the 2000s, cracks show up earlier than they should. This is the one problem where repair-versus-replace becomes a genuine safety decision, and we’ll show you exactly what we see.
- Dirty blower motors from construction dust: Converse grew fast, and homes built in newer subdivisions often have drywall dust and debris in the return duct. That grit wears down blower motors and reduces airflow. A thorough cleaning and static-pressure check often solves a furnace that runs but barely pushes warm air.
Pricing for Furnace Repair in Converse, TX
Here’s what furnace repair actually costs in Converse. A typical repair, like a flame sensor cleaning or capacitor replacement, runs $150 – $350. More involved work, like a gas valve replacement or a blower motor repair, runs $350 – $700. The price is in writing before any work starts, and it does not change at the door. You’ll know the exact number before we pick up a tool.
| Service | Typical Cost in Converse |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
What moves the price within those ranges is the part, not the position of your neighborhood. A failed ignitor on a Goodman in Converse costs about the same as the same ignitor on a Goodman near Cibolo. The difference comes from what actually failed. We’ll diagnose the problem, show you the written price, and you decide. Estimates are free.
We Also Serve Cities Near Converse
Dalton Heating & Air handles furnace repair across the northeast San Antonio metro. If you’re in Converse, Universal City, Schertz, Cibolo, or Marion, the same crews and the same written pricing apply. Dispatch works out of the San Antonio metro office, so we can usually reach these areas within a tight window and stock parts along the route. Call (361) 306-9515 and we’ll get you on the schedule for the same day if your heat is out.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Converse
In most Converse homes, the furnace is repairable. The most common issue after months of disuse is a weak capacitor or a dirty flame sensor, both of which are under $300 to fix. On a January call off FM 78 near Converse City Park, our tech found a Carrier furnace that had sat idle since the previous winter, with a failed capacitor and a blower motor drawing high amps. We replaced the capacitor, corrected the static pressure on the return, and verified the heat exchanger before the homeowner ran it through the next freeze. The system heated the house that night on the original furnace instead of a replacement quote. Call (361) 306-9515 and we’ll diagnose it the same way.
The decision comes down to two numbers: the repair cost and the age of the heat exchanger. If a Converse furnace is under 12 years old and the repair is $150 – $700, repairing almost always makes sense. If the heat exchanger is cracked on a unit from the mid-2000s, replacement is often the safer and smarter call. We’ll show you the photos, give you the exact repair price in writing, and quote you a replacement only if it’s genuinely warranted. No commissions drive this recommendation.
Yes, and it matters more in Converse than in many other markets because so many homes here were sized for cooling when the AC tonnage was set, with the heating side never getting the same attention. A proper Manual J load calculation accounts for your home’s square footage, insulation, window orientation, and duct layout. We’ve seen Converse homes where the furnace is 20% oversized for the actual heating load, which causes short cycling and wasted gas. If you’re near Converse City Park or in a newer subdivision off FM 1516, a load check is part of an honest repair-versus-replace conversation.
SEER2 is a cooling efficiency measurement, so it technically applies to your AC, not your furnace. But if your Converse home has a matched system and you’re weighing repair against replacement, SEER2 matters because it changed the minimum efficiency standards for new equipment. A replacement furnace paired with an older AC may not hit the numbers the sales sheet suggests. We’ll explain the real math on your actual setup, not a brochure. Furnace efficiency is measured by AFUE, and for Converse winters, an 80% AFUE furnace vs a 96% AFUE unit changes your gas bill by a noticeable margin.
We treat no-heat calls in Converse as genuine emergencies, especially when temperatures drop toward freezing. Our dispatch runs from the San Antonio metro office, and we typically reach homes anywhere in Converse, including along FM 78 and around Converse City Park, within a short window. Call (361) 306-9515 and a live person will confirm the arrival window. We’ll have a background-checked, uniformed technician at your door, with the price in writing before any work starts.
If your furnace isn’t heating in Converse, don’t wait through a cold night. Call Dalton Heating & Air at (361) 306-9515 for a free estimate and a written price before any work begins. We service Trane, Lennox, Goodman, Rheem, and six other major brands, and we stand behind every repair for a full year.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Converse and the surrounding area.







Before
After
Before
After
Before
After