Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Beverly Hills
Most furnace repairs in Beverly Hills run between $150 and $700, and a qualified technician can usually diagnose the problem in under an hour. If your furnace won’t start, won’t hold temperature, or is making sounds it shouldn’t make, call Dalton Heating & Air at (361) 306-9515. We answer the phone with a live person around the clock, and our crews serve Beverly Hills, West Hollywood, Culver City, Santa Monica, and Marina del Rey from our Los Angeles dispatch office. The price is in writing before any work starts, and every repair carries a written year-long guarantee.
Why Dalton Heating & Air Is Beverly Hills’s Preferred Furnace Repair Company
Beverly Hills homeowners deal with a specific set of furnace problems that a generic repair company doesn’t see coming. The city has one of California’s largest concentrations of mid-century ranches and condos with original 1950s and 60s ductwork. That means furnaces here are often oversized for the ductwork they’re attached to, short-cycling against poorly sealed returns. A tech who doesn’t understand that reality will sell you a new furnace when the problem is actually a $200 duct sealing job and a $150 capacitor. We see this pattern regularly in Trousdale Estates, the flats, and the condo towers along Wilshire and Santa Monica Boulevard.
Dalton Heating & Air is a Garrison Partners company, operating under The Garrison Standard since 2003. Marco Benitez leads our team, and every tech who shows up at a Beverly Hills door is background-checked, uniformed, and factory-trained to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We don’t send subcontractors. You know who’s coming before they arrive.
Every job gets a written price before any work begins. Every repair gets a written guarantee. If the repair fails within that guarantee period, we return at no charge. That’s not an upgrade, and it’s not negotiable. It’s how The Garrison Code works, and it’s been that way since 2003.
Heating Repair in Beverly Hills
Heating Repair in Beverly Hills means diagnosing a furnace that won’t start, won’t stay lit, or won’t hold a set temperature, and the honest answer is that the first visit should cost you $150 to $200 for diagnosis, with the repair itself falling in the $150 to $700 range depending on the part. Too many homeowners in this city get quoted a full replacement before anyone has even tested the ignitor or the flame sensor. A no-heat call in a Trousdale Estates ranch is not the same job as a no-heat call in a Coldwater Canyon contemporary, and anyone quoting you over the phone without seeing the unit is guessing.
We test the whole sequence: thermostat signal, inducer motor, pressure switch, ignitor, flame sensor, gas valve, and blower. Most of those parts are under $300. A gas valve replacement can push toward $700. We tell you exactly which part failed, what it costs, and what we’d do if it were our house. Then you decide.
Furnace Tune-Up and Ignitor Replacement Work
A furnace tune-up in Beverly Hills runs $80 to $200 and catches the failures that become emergencies at 2 a.m. We check heat exchanger integrity, gas pressure, burner condition, and static pressure. Ignitor replacement is one of the most common repairs we do on systems older than a decade. The part is affordable; the diagnostic discipline is what separates us from a parts-swapper.
Boiler Repair in Beverly Hills
Boiler Repair in Beverly Hills is less common than furnace work, but it shows up in older condo buildings and a handful of mid-century homes that never converted to forced air. Most boiler repairs in this market run $150 to $700, with the diagnostic visit typically $150 to $200. The symptoms are usually the same: no heat, banging sounds, a boiler that fires and shuts off, or a pressure gauge that drops to zero overnight. Older boilers in Beverly Hills condo towers often get neglected until a circulator pump fails in the middle of a cold snap. The fix is usually straightforward. The diagnosis is what matters.
We carry common circulator pumps, pressure relief valves, and ignition controls on our trucks so we don’t have to make a second trip from our Los Angeles dispatch office to Beverly Hills on most boiler calls. The Garrison Standard applies to boiler work the same way it applies to furnace work: written price first, written guarantee after, and a free return if the repair fails within the guarantee period.
Boiler Safety Inspection and Gas Valve Work
A boiler safety inspection runs $80 to $200 and checks gas connections, venting, pressure relief valve function, and carbon monoxide risk. Gas valve repair sits at the higher end of the $150 to $700 range and is not a job to try on your own. A leaking gas valve is a real hazard. If you smell gas in a Beverly Hills home, shut the boiler off and call a licensed tech immediately. Then call us.
Trusted Brands We Service in Beverly Hills
Our techs are factory-trained on Trane, Lennox, Goodman, and Rheem systems, plus five more major residential brands. That matters in Beverly Hills because this city has a mix of everything: original mid-century Rheem and Lennox units in older ranches, newer Trane and Goodman systems in flipped homes, and condo towers with whatever brand the building spec’d. We stock common parts for all of them and coordinate directly with our Los Angeles parts suppliers to get uncommon parts to Beverly Hills addresses fast. If we can’t fix it same-day, we’ll tell you before we leave, not after you call to ask where we went.
For more detail on what our Furnace Repair team checks on a diagnostic visit, see our main service page.
Common Furnace Repair Problems We See in Beverly Hills Homes
- Undersized returns and leaky 1950s – 60s ductwork in Trousdale Estates and the flats. A static pressure reading north of 0.8 in. w.c. tells us the furnace is working against ductwork it wasn’t designed for. Short-cycling follows, and so do big repair quotes for a unit that’s mechanically sound.
- Failing capacitors and weak blower motors on 15 to 20 year old furnaces. The unit runs, but it won’t hold temperature. Too often that gets misdiagnosed as a dead heat exchanger. A $30 capacitor test and a blower motor check takes 20 minutes and prevents a $4,000 misdiagnosis.
- Condo tower quotes without a load calculation. Beverly Hills condo owners get oversized replacement quotes before a $200 diagnostic even establishes whether the furnace is at end of life. We run the load calculation first. Every time.
- Gas valves and flame sensors failing on systems that sat idle through a mild winter. Beverly Hills doesn’t get a long hard freeze like some markets, but the first cold night of the season is when neglected furnaces reveal themselves. A flame sensor clean or a gas valve replacement is often all it takes.
Pricing for Furnace Repair in Beverly Hills, CA
Here are the real numbers for Beverly Hills. These are the ranges we actually quote on the phone and write on the work order before any wrench turns.
| Service | Price Range in Beverly Hills |
|---|---|
| Furnace repair (diagnostic + repair) | $150 – $700 |
| Heating repair visit | $150 – $700 |
| Boiler repair | $150 – $700 |
| Tune-up / safety inspection | $80 – $200 |
What moves the number is the part: an ignitor or flame sensor sits at the low end. A gas valve or blower motor sits at the high end. A heat exchanger replacement on a furnace that’s worth keeping can exceed the range, and we’ll tell you straight if your money is better spent on a new system. Free estimates. Written price before any work starts. Call (361) 306-9515 and ask for Marco’s crew.
We Also Serve Cities Near Beverly Hills
Dalton Heating & Air runs regular routes into West Hollywood, Culver City, Santa Monica, and Marina del Rey. If you’re in one of those cities, you’ll get the same written pricing, the same year-long guarantee, and the same background-checked techs. We’ve served the broader Beverly Hills area since we started taking calls in this market.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Beverly Hills
Most Beverly Hills furnaces that won’t heat need a repair between $150 and $700, not a replacement. Here’s how we decide: if the heat exchanger is cracked, the repair can cost more than a new furnace makes sense, and we’ll say so. If the furnace is mechanically sound but the ductwork is leaking, a replacement won’t fix your problem. A load calculation tells us which side you’re on. The diagnostic visit costs $150 to $200, and that fee is applied toward the repair if you go ahead with it.
A load calculation matters more in Beverly Hills than in most cities, and it’s not a sales upsell. Our tech recently stood in a 1962 ranch in Trousdale Estates where the original furnace was short-cycling on a newer Carrier system. A static pressure reading showed 0.9 in. w.c. against a leaking, undersized return. We repaired the issue on that visit, then ran a proper load calculation and showed the homeowner why the replacement quote was premature until the ductwork was sealed. The load calculation is how you know whether you need a service call or a system changeout. Without it, you’re guessing.
Furnace repair in Beverly Hills runs $150 to $700, and a tune-up or safety inspection runs $80 to $200. A full furnace or AC installation runs $3,500 to $7,500 for the equipment and the work, depending on system size and what’s involved. Those are the numbers we quote on the phone and write on the work order. No technician has discretion to change the price at the door.
SEER2 is a more accurate efficiency rating than the old SEER standard, and it changes what a replacement actually costs to run. A 14 SEER2 system is the current federal minimum, and a 17 SEER2 system can trim your cooling bill measurably on a hot Beverly Hills July. What the SEER2 number doesn’t tell you is whether your ductwork can deliver the efficiency on the label. If the ducts leak, you’re paying for efficiency you’re not getting. That’s why we run a static pressure test and a load calculation before we quote an installation, not after you’ve signed.
For a genuine no-heat call in Beverly Hills, we aim for same-day service, and we answer the phone with a live person 24/7 because we don’t route emergency calls to a voicemail queue. No overtime charge for nights or weekends. Call (361) 306-9515 and tell the dispatcher you have no heat in Beverly Hills, and we’ll get a truck your way as fast as the route allows.
Call Dalton Heating & Air for Furnace Repair in Beverly Hills
If your furnace is acting up in Beverly Hills, don’t let a parts-swapper guess at it. Call (361) 306-9515 for a free estimate and a written price before any work begins. Marco Benitez and our team serve Beverly Hills with the same Garrison Standard we’ve held since 2003: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Beverly Hills since 2003.