Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Argyle
Furnace repair in Argyle, TX typically runs $150 – $700, and most no-heat calls are diagnosed and fixed same-day when parts are on the truck. That’s the real number you should have before anyone steps foot in your house, and we’ll put ours in writing before work starts. Dalton Heating & Air runs crews through Argyle daily, from the rural-lot homes west of I-35W to the newer subdivisions off Crawford Road. If your furnace won’t fire or the house sits at 62°F while the thermostat says 70°F, call (361) 306-9515 and a real person picks up, day or night.
Why Dalton Heating & Air Is Argyle’s Preferred Furnace Repair Company
Argyle homeowners deal with a specific kind of furnace problem: systems sized for a square-footage rule of thumb that doesn’t match how the house actually breathes. Our techs know that a no-heat complaint in a 2004-era Goodman off Harpole Road is often a cracked heat exchanger, while the same symptom in a custom home on a five-acre lot near Copper Canyon might be static pressure from a pinched return. That local pattern recognition isn’t something a dispatch center in another county teaches.
We arrive inside the window we give you, the price goes in writing before any work starts, and every repair carries a written guarantee for a full year. If the same repair fails inside that year, we return at no charge. That’s The Garrison Standard, and it’s not an upgrade or a pitch. It’s how every Dalton Heating & Air call works, and it’s been that way since 2003.
Marco Benitez leads the Argyle repair team. The technicians who show up at your door are background-checked, uniformed, and factory-trained on nine major HVAC brands. You’ll know who’s coming before they pull in the driveway.
Furnace Maintenance in Argyle
Furnace maintenance in Argyle is the single best way to avoid a no-heat situation during a January cold snap, when your system is running its longest cycles of the year and any weak part finally gives out. A proper tune-up runs $80 – $200 in the Argyle market and catches the failures that strand you at the worst time: a hairline ignitor crack, a flame sensor coated in furnace-cement dust from a nearby lot, a blower wheel shedding balance weights.
What Gets Checked During a Tune-Up
Our techs inspect the heat exchanger for cracks, test flame signal strength, check gas pressure at the manifold, and measure static pressure across the system. That last one matters disproportionately in Argyle. Homes on larger lots west of I-35W often have long duct runs and undersized returns, and a furnace that “just isn’t keeping up” is frequently an airflow problem, not a burner problem.
Why Pre-Season Maintenance Beats Emergency Calls
A $120 tune-up in October beats a $400 inducer motor replacement on a 28°F December morning, and it means you’re not calling us at 2 a.m. because the furnace quits during the first real freeze. We recommend Argyle homeowners schedule maintenance in early fall, before the heating load starts. It’s easier to get the window you want, and parts are in stock before the winter rush hits every HVAC company in Denton County.
Heat Pump Repair in Argyle
Heat pump repair in Argyle runs on the same $150 – $650 AC-repair price band and usually comes down to one of three things: a bad reversing valve sticking in one mode, a failed defrost board leaving the outdoor coil iced over, or refrigerant loss from a slow leak at a flare joint. Argyle’s mix of all-electric and dual-fuel homes means we see both pure heat pump systems and heat pump-plus-furnace setups, and the diagnosis path differs for each.
Dual-Fuel System Repairs
In dual-fuel homes around Argyle, the heat pump handles shoulder-season heating and the furnace takes over below about 35°F. When a homeowner reports “the furnace is running but the house won’t warm up,” the failure is sometimes in the changeover logic rather than the furnace itself. Our techs test the full sequence, not just the part that’s easy to blame.
All-Electric Heat Pump Repairs
All-electric heat pump systems in newer Argyle construction depend entirely on the outdoor unit, which means an iced-over coil or a failing compressor is a no-heat situation. We stock common reversing valves, defrost boards, and contactors on our trucks serving Argyle, so most repairs don’t wait on a parts run to the supply house.
Trusted Brands We Service in Argyle
Our techs are factory-trained to service nine major residential HVAC brands, and in Argyle specifically we service a lot of Trane, Lennox, Goodman, and Rheem equipment – the brands developers put into early-2000s subdivisions and the ones high-end custom builders specify today. We keep common replacement parts for these systems stocked locally, which means a failed ignitor on a Trane XR80 or a cracked inducer housing on a builder-grade Goodman doesn’t turn into a three-day parts wait. When a part isn’t on the truck, we tell you that upfront, in writing, with a real arrival date. No vague “we’ll call you when it comes in.”
Common Furnace Repair Problems We See in Argyle Homes
- Ignitor and flame-sensor failures during January cold snaps. When the furnace runs its longest cycles of the year, a silicon-nitride ignitor that’s been degrading for two seasons finally cracks or opens. The furnace locks out, and suddenly you have no heat at 6 a.m. on the coldest week of the year.
- Cracked heat exchangers on 15-plus-year-old builder-grade units. Argyle’s early-2000s subdivisions are full of Goodman and York furnaces reaching end of design life. A cracked heat exchanger is often caught only after a carbon-monoxide detector complaint or a visual inspection during what the homeowner thought was a routine tune-up.
- Thermostat calibration drift and high static pressure from long rural duct runs. Homes on Argyle’s larger lots frequently have duct systems that were undersized from the jump. The furnace fires fine, but the house never quite reaches setpoint, and the real culprit is airflow restriction, not combustion.
- Short-cycling from oversized equipment. A furnace that’s two sizes too big for the envelope heats the air fast, satisfies the thermostat, and shuts off before the heat reaches the far bedrooms. It’s wasteful and it beats on the heat exchanger. Load calculation fixes this; guessing doesn’t.
Pricing for Furnace Repair in Argyle, TX
Most furnace repairs in Argyle land between $150 and $700, with the spread driven by which part failed and how accessible it is. An ignitor replacement runs on the low end. A blower motor or gas valve replacement runs higher. A full heat exchanger replacement can exceed that band and is usually the point where you should look hard at replace-versus-repair math. Here’s the honest breakdown:
| Service | Price Range in Argyle |
|---|---|
| Furnace Repair | $150 – $700 |
| AC Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
| AC Installation | $3,500 – $7,500 |
Every repair estimate is free, in writing, and valid before any work starts. You’ll see the exact number before we turn a screw. If the repair fails within one year, we come back at no charge. If we’re replacing the system, you’ll get a written fixed price, a set install date, and help with any rebate or financing paperwork. Call (361) 306-9515 for an exact quote on your furnace situation.
We Also Serve Cities Near Argyle
Dalton Heating & Air handles Furnace Repair across the Argyle area, including Flower Mound, Roanoke, Lake Dallas, and Denton. Each of those towns has its own housing stock and its own failure patterns – Roanoke’s newer builds run differently than Lake Dallas’s 1970s ranches – and our techs know the difference. If you’re in a neighboring community and your furnace won’t fire, the same Furnace Repair in Argyle team covers your street, too. Same pricing, same written guarantee, same crew standards.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Argyle
Repair is usually the right call when the failing part costs less than 50% of a replacement system and the heat exchanger is intact; replacement makes sense when the heat exchanger is cracked, the unit is 15-plus years old, or a load calculation shows the furnace is badly oversized or undersized for the house. In Argyle, we often find homes where the furnace still “works” but is two tonnage sizes off for the envelope, and throwing parts at an oversized unit is just burning money. Call (361) 306-9515 and we’ll give you the honest answer, with the numbers to back it up.
A load calculation – a room-by-room Manual J – tells you exactly how many BTUs your specific Argyle house needs based on square footage, window orientation, insulation levels, and duct layout, rather than a square-footage rule of thumb. In Argyle’s new-build and rural-lot mix, this matters more than in most towns because homes on larger lots west of I-35W often have long duct runs and undersized returns, and a furnace sized by rules of thumb in a custom home frequently misses by 50% or more. That changes whether repair or replacement is the smarter spend.
Short-cycling – the furnace fires up, runs a few minutes, shuts off, then repeats – is usually caused by oversized equipment, a failing flame sensor, or high static pressure from restricted ductwork. In Argyle, we see it most in larger custom homes where the furnace is too big for the actual load, and in homes with pinched returns in attic chases. It’s not just an annoyance; short-cycling increases wear on the heat exchanger and shortens the unit’s life. Call (361) 306-9515 for a diagnosis.
SEER2 is a cooling-efficiency metric and it applies to the AC or heat pump side, not the furnace itself, so it’s not the deciding factor in a furnace repair call. What matters for the furnace is the AFUE rating, and if you’re replacing a 15-year-old furnace, the difference between a 80% AFUE unit and a 95% AFUE condensing furnace shows up directly on your January gas bill. In Argyle’s heating season, that higher efficiency pays back faster than people expect. We’ll show you the actual dollar math before you decide.
Furnace repair in Argyle typically runs between $150 and $700, with simple part replacements like ignitors and flame sensors at the low end and blower motors or gas valves at the higher end. The exact number depends on which part failed and what equipment you have, but you’ll know the price in writing before any work starts. Estimates are free, and if the repair fails within a year, Dalton Heating & Air returns at no charge.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Argyle since 2003.