Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Heat Pump Installation Across Nolensville
Heat pump installation in Nolensville typically runs $3,500 – $7,500 for a complete system, depending on the home’s size, ductwork condition, and the equipment you choose. Most full installs take one to two days, and we coordinate everything from the load calculation to the final startup so you’re not chasing permits or wondering who shows up next. Dalton Heating & Air crews know Nolensville’s housing stock well, from the newer subdivisions off Nolensville Road to the larger-lot homes along Rocky Fork Road, and we’re familiar with the duct issues that quietly undercut performance in this area. If your heat pump is dead or dying, call (361) 306-9515 and we’ll get a technician to your door, written price in hand, before any work begins.
Why Dalton Heating & Air Is Nolensville’s Preferred Heat Pump Installation Company
We operate under The Garrison Standard, which is not a slogan but a set of non-negotiable terms: a written price before any work starts, a written guarantee on every repair, and a free return visit if the work fails within the guarantee period. That has been the rule since 2003. Homeowners in Nolensville call us for a specific reason: they’re done with techs who quote one number on the phone and another at the door.
Our technicians are background-checked and uniformed, and you’ll know who is coming before they arrive. We service all nine major residential HVAC brands, including Goodman, Rheem, York, and Daikin. Calls are answered by a live person 24/7, not a voicemail queue. So when a heat pump fails during a Tennessee cold snap or a July heat wave, you can reach a human being at 3 a.m. and get a real answer.
Marco Benitez, who leads our team, has built the Nolensville operation around one principle: do the job by the book and stand behind it for a full year. No exceptions. The 365-Day Done Right Promise means if it is not done right, we make it right. That matters when you’re spending thousands on a heat pump install.
Mini Split Installation in Nolensville
Mini Split Installation in Nolensville is the right answer for additions, garages, sunrooms, and older homes where ductwork would be expensive or impossible to add. A ductless mini split uses an outdoor condenser paired with one or more indoor air handlers mounted on the wall or ceiling. Each indoor unit runs independently, so you can cool a bonus room above the garage without overcooling the rest of the house. We install these frequently in Nolensville homes with bonus rooms over garages, which are common in the Bent Creek and Summerlyn subdivisions.
Installing a mini split in Nolensville typically falls within the same $3,500 – $7,500 range as a ducted system, though smaller single-zone units can land on the lower end. The exact price depends on how many zones you need and the distance between the indoor and outdoor units. Written pricing before work begins is not optional with us. It is the rule.
When a Ductless System Makes Sense
Many Nolensville homes built in the last 15 years have long duct runs and bonus rooms that never quite reach setpoint. A mini split solves that without touching the existing ductwork. It also works well for detached workshops and converted garages.
What the Install Involves
We mount the indoor unit, run the line set through a small exterior wall opening, and place the outdoor condenser on a pad or bracket. Then we pull a vacuum on the refrigerant lines, check for leaks, and commission the system. It is typically a one-day job.
Heat Pump Maintenance in Nolensville
Heat Pump Maintenance in Nolensville is about keeping pollen, humidity, and shoulder-season short cycling from quietly eroding your system’s performance. A heat pump tune-up runs $80 – $200 and includes checking the refrigerant charge, cleaning the condenser and evaporator coils, testing the reversing valve, and measuring static pressure. We give you a written report of what was actually found and what the readings mean on your utility bill.
Nolensville’s spring pollen season is rough on outdoor coils. When the condenser coil gets choked with pollen, the system runs hotter and works harder to move heat. Summer humidity makes it worse. A tune-up before cooling season and another before heating season keeps the system from being surprised by the load.
Coil Cleaning and Airflow Testing
Coil cleaning is straightforward but often skipped. As part of a tune-up, our technicians measure return and supply static pressure. In Nolensville homes with flex-heavy duct runs and long trunk lines, static pressure often reads above 0.8 in. w.c., which means the fan is working against a restriction. We show you the number in the report.
Refrigerant and Reversing Valve Check
We check the refrigerant charge against the manufacturer’s spec so the system strips heat out of the air efficiently. The reversing valve is the part that switches the heat pump between heating and cooling modes; if it sticks, you get cooling when you want heat. We catch that on a tune-up before it strands you on a cold morning.
Trusted Brands We Service in Nolensville
We’re factory-trained to service and install Goodman, Rheem, York, and Daikin systems, plus the rest of the nine major residential brands: Carrier, Trane, Lennox, and American Standard. For Nolensville homeowners, that means our techs know the exact sequence of operation for your unit, not a generic handbook version of it. We stock common parts for these brands on our trucks, so a repair or install does not stall because a part has to be shipped across the state. If you have an existing Goodman heat pump and want to stay with the same brand, we can match it. If a Rheem or Daikin system makes more sense for your home’s load, we will tell you straight.
Common Heat Pump Installation Problems We See in Nolensville Homes
- Undersized return ducts on newer builds. A lot of Nolensville homes under 10 years old have return ducts that cannot move enough air for the system’s rated tonnage. Static pressure climbs, blower motors wear out early, and the new heat pump never delivers its rated capacity.
- Oversized tonnage “just in case.” Some builders install bigger equipment than the load calculation calls for. That leads to short cycling, humidity problems, and premature blower motor wear, especially on Nolensville’s mild shoulder-season days when the house just does not need full capacity.
- Pollen and humidity fouling coils. Spring pollen settles on condenser coils and clogs them fast. Combined with humid summer air, fouled coils throw off refrigerant charge readings and cut into the system’s better efficiency numbers if maintenance gets skipped.
- Long duct runs on large lots. Many homes along Rocky Fork Road and in subdivisions like Bent Creek sit on larger lots with longer trunk lines. That geometry exposes any duct sizing flaw, which is why we check static pressure before any heat pump install in Nolensville.
Pricing for Heat Pump Installation in Nolensville, TN
A full heat pump install in Nolensville runs $3,500 – $7,500, and the spread is real. A smaller 2-ton system in a tight, well-insulated home lands on the low end. A larger variable-speed system with duct corrections lands higher. The variables that move the number are tonnage, SEER2 rating, ductwork condition, and whether you need a new line set or electrical upgrade. Here is how the line items break down:
| Item | Typical Range in Nolensville |
|---|---|
| Heat pump installation (complete system) | $3,500 – $7,500 |
| Tune-up (maintenance visit) | $80 – $200 |
We give you the price in writing before any work starts. That includes the name of the exact equipment we are installing and what the warranty covers. Call (361) 306-9515 for a free estimate, and we will come measure the house, test the ductwork, and give you a fixed number, not a range.
We Also Serve Cities Near Nolensville
Our Nolensville crews also handle heat pump installation in La Vergne, Brentwood, Smyrna, and Franklin. If you are in one of those towns and need a Heat Pump Installation quote or a second opinion on a repair, call the same number: (361) 306-9515. Same written pricing, same 365-Day Done Right Promise.
Serving Nolensville, TN - Our Local Coverage Area
We’re based in the Nolensville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Nolensville
Yes, you need a load calculation, and no, matching the old tonnage is not enough. Nolensville’s newer homes often have oversized equipment already, and simply swapping like-for-like perpetuates the problem. A manual J load calculation uses the home’s square footage, window orientation, insulation, and duct layout to determine the correct tonnage. We do one before every install.
In the Bent Creek neighborhood, a homeowner’s 2018 Carrier heat pump was short-cycling in both heating and cooling. Our tech measured static pressure at 0.92 in. w.c. and found the return duct undersized for the home’s 3-ton tonnage. We performed a room-by-room load calculation, upsized the return, corrected the refrigerant charge, and the system now holds setpoint without the auxiliary heat running constantly. That is the difference a real calculation makes.
Call (361) 306-9515 if you want a load calculation and a written install number for your Nolensville home.
SEER2 is the updated efficiency rating for heat pumps under the 2023 federal testing standard. In Nolensville, where cooling season runs long and humid, a jump from a 14 SEER2 unit to a 17 or 18 SEER2 unit typically cuts the cooling portion of the electric bill by 15 to 25 percent, depending on the home. The savings are bigger on homes with long duct runs and high cooling hours.
It is not abstract. If your summer bill runs $250 a month and $180 of that is cooling, a higher SEER2 unit can put $30 to $45 back in your pocket each month. Over a 15-year lifespan, that adds up. Call (361) 306-9515 and ask us to model it for your house.
At 12 years old, a heat pump in Nolensville is approaching the end of its typical 12 to 15 year lifespan. A $600 repair on a unit that age usually makes sense only if the rest of the system is in solid shape and the repair comes with a written guarantee. If the unit has already needed multiple repairs in the last two years, replacement starts looking cheaper than continued patchwork.
A new heat pump install in Nolensville runs $3,500 – $7,500, and it comes with a full manufacturer warranty and our 365-Day Done Right Promise. We will give you a straight answer on what we would do if it were our house. Call (361) 306-9515 and we will inspect the system and put both options in writing.
On mild spring days, a correctly sized heat pump should not struggle. If it does, the usual suspects in Nolensville homes are oversized equipment that short cycles, undersized ductwork that starves the system of airflow, or a reversing valve that is sticking. Oversized units cool the house before they dehumidify, so the air feels clammy and the compressor cycles constantly.
A static pressure test and a quick check of the reversing valve will identify which one is causing your problem. We include both in a $80 – $200 tune-up. Call (361) 306-9515 and we will diagnose it straight.
Twice a year. Once before cooling season and once before heating season. Nolensville’s spring pollen season coats the outdoor coil quickly, and summer humidity accelerates coil grime. That combination throws off refrigerant readings and cuts into the system’s better SEER2 performance if you skip maintenance.
A tune-up runs $80 – $200 and includes coil cleaning, refrigerant check, reversing valve test, and a written report of the static pressure and temperature split. Call (361) 306-9515 to schedule a tune-up or ask about our maintenance plan for Nolensville homeowners.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Nolensville and the surrounding communities.







Before
After
Before
After
Before
After