Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Conroe
Heat pump installation in Conroe, TX typically runs $3,500 – $7,500 for a complete system replacement, depending on the size of your home and what your existing ductwork will support. We serve all of Conroe, from the acreage lots off Longmire Road to the neighborhoods east of I-45 near The Woodlands, with crews that show up inside the window and put the price in writing before any work begins. Call (361) 306-9515 for a free estimate and an honest read on whether your current system is worth repairing.
Why Dalton Heating & Air Is Conroe’s Preferred Heat Pump Installation Company
Conroe homeowners deal with a specific problem: humid summers that run from May through October, and a winter that rarely drops below freezing but still asks for heat on those damp January mornings. That means the heat pump we install has to be sized for the cooling load first, not the heating load. A lot of companies miss that. They drop in the same tonnage as the old box, charge it by rule of thumb, and the homeowner spends the next decade with a system that short-cycles in summer and never quite dehumidifies the living room. We don’t do that. Our Heat Pump Installation process includes a room-by-room load calculation, static pressure measurement on the existing ductwork, and refrigerant charge verification before we walk away.
Dalton Heating & Air is a Garrison Partners company, held to The Garrison Standard since 2003. That’s not a tagline. It’s a written set of non-negotiables: written price before any work starts, a written guarantee on every repair, and a free second visit if the repair fails inside the guarantee period. The person who shows up at your Conroe door is a background-checked, uniformed technician who has been factory-trained on Trane, Lennox, Goodman, Rheem, Carrier, York, Daikin, Bryant, and American Standard. You’ll know their name before they arrive, and they’ll leave the job site cleaner than they found it.
Marco Benitez, who leads our team, holds every install to The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That’s the standard. Not a promise. The standard.
Heat Pump Maintenance in Conroe
Heat Pump Maintenance in Conroe is not optional if you want a system that lasts past the first five years of Montgomery County humidity. A heat pump runs year-round here: cooling all summer, heating in the winter, and often switching between the two in the same week during March and October. That’s double the runtime of a standard furnace-plus-AC setup. Double the runtime means double the wear on the compressor, the reversing valve, and the coils. A once-a-year maintenance visit catches the small stuff before it becomes a $1,200 repair. In Conroe, we recommend a maintenance visit every spring before the cooling season starts, and a check in the fall if your system handles both seasons hard.
The cost for a heat pump tune-up in Conroe runs $80 – $200, depending on the system and whether we’re doing a full diagnostic pass or a basic seasonal check. If your system isn’t cooling the way it did last July or your electric bill is creeping up with no obvious explanation, that’s a charge or airflow issue, and it’s cheaper to catch it in April than in August.
What Our Conroe Techs Check on Every Visit
We measure refrigerant charge against the manufacturer’s spec, check the reversing valve is shifting correctly, and pull the cabinet to inspect the condenser coil. In Conroe, the coil picks up pollen, grass clippings, and the fine dust that blows off the pine stands north of town. A dirty coil alone can knock 10-15% off your system’s efficiency, and that shows up on your summer bills.
We also measure static pressure on the air handler. Older Conroe ductwork, especially in homes built in the 1980s and 1990s, was often undersized for the tonnage it now serves. If the blower is fighting restrictive ducts, the system is losing efficiency before it ever conditions a room. We report what we find. If it’s fine, you’ll know. If it’s not, you’ll see the numbers.
Geothermal Heat Pump Installation in Conroe
Geothermal Heat Pump Installation in Conroe is a different animal from a standard air-source heat pump, and it’s one we handle for homeowners who want the lowest possible operating cost over a 20-year horizon. Instead of pulling heat from the outside air, a geothermal system runs a closed loop of water and antifreeze through the ground where the temperature stays constant about 55 to 60 degrees year-round. That constant temperature is a huge advantage in Conroe’s mixed-humid climate, because the system doesn’t lose efficiency when the outdoor air hits 98 degrees in August or drops to 35 in January. The trade-off is the upfront cost: a geothermal install typically runs at the top of or beyond the $7,500 range for a standard air-source system, often more depending on the loop field and drilling conditions on your property.
When a Conroe homeowner asks us about geothermal, the first thing we do is look at the lot. Loop fields need either open space for horizontal trenches or access for a vertical bore. Lots in River Plantation or along the back roads west of I-45 often have the room. Smaller lots in older Conroe subdivisions may not. We’ll tell you straight which direction makes sense before you spend a dime.
Geothermal On Larger Acreage Lots
If you own land in the northern part of Conroe or up toward Montgomery, horizontal loops become cost-effective because you have the space for trenches. The ground here holds steady temperatures shallow, and drilling isn’t always necessary. We’ve installed horizontal fields on acreage lots where the trenching cost came in below what the homeowner budgeted for vertical bores.
Geothermal On Compact City Lots
Smaller lots in Conroe’s established subdivisions often work better with a vertical bore loop. We coordinate the drilling, the loop installation, and the indoor unit all as one job with one crew responsible for the outcome. The Garrison Standard applies to geothermal the same as it does to a standard install: written price, written guarantee, and a full year of coverage under the 365-Day Done Right Promise.
Trusted Brands We Service in Conroe
Our techs are factory-trained on the systems most common in Conroe homes: Trane, Lennox, Goodman, and Rheem, along with Carrier, York, Daikin, Bryant, and American Standard. That matters when you need a part. We keep the common wear items for these brands stocked in our metro warehouse, which means a Trane heat pump repair in Conroe doesn’t sit and wait three days for a part to ship from Dallas. If the part is local, the fix is often same-day. If you’re installing new, we’ll help you pick a brand and a model that fits your house, not one that fits a sales quota.
Common Heat Pump Installation Problems We See in Conroe Homes
- Oversized systems from square-footage guessing. Replacing a heat pump based on square footage alone, instead of a load calculation, leaves you with a unit that’s too big for Conroe’s humid cooling season. An oversized system short-cycles, meaning it blasts cold air, satisfies the thermostat in minutes, and never runs long enough to pull moisture out of the air. You pay more upfront and your house feels clammy all summer.
- Incorrect refrigerant charge on install. Skipping refrigerant charge verification is the most common install shortcut we see in Conroe, and it’s expensive. An undercharged or overcharged system never hits its rated SEER2, which means the efficiency number on your quote is just a number. The long cooling season here makes that mistake show up fast on your electric bill.
- Static pressure ignored in older ductwork. Conroe has a lot of homes built in the 1980s and 1990s with ductwork that’s restrictive by modern standards. If the installer doesn’t measure static pressure, the blower motor and evaporator coil fight those ducts from day one, and the efficiency is lost before the system ever delivers comfortable air to the back bedrooms.
- Cold-climate heat pumps installed for the wrong reason. Some Conroe homeowners get sold a cold-climate heat pump on the promise of better heating during our rare freeze events. The truth is, Conroe’s heating load is light and the cooling load is what drives sizing. Unless you’re getting a specific efficiency benefit on the cooling side, you may be paying for capability you don’t need.
Pricing for Heat Pump Installation in Conroe, TX
A full heat pump installation in Conroe runs $3,500 – $7,500, and where you land in that range depends on a few things: the tonnage your load calculation calls for, whether your existing ductwork needs modification, and the SEER2 rating you choose. A standard 3-ton system in a 1,800-square-foot Conroe home will sit at the lower end. A variable-speed 5-ton system with high-efficiency ratings and ductwork corrections will approach the top. Here’s the line-item pricing we quote across Conroe:
| Service | Typical Conroe Price Range |
|---|---|
| Heat pump installation | $3,500 – $7,500 |
| Heat pump repair | $150 – $650 |
| Heat pump tune-up | $80 – $200 |
| Furnace/air handler repair | $150 – $700 |
Every quote is in writing before we start. No exceptions. The price on the quote is the price on the invoice. If a repair fails inside the guarantee period, we return at no charge. Call (361) 306-9515 for a free estimate on a new heat pump in Conroe, and we’ll give you real numbers based on your house, not a sales brochure.
We Also Serve Cities Near Conroe
In addition to Conroe, our crews regularly install and service heat pumps in Willis, Montgomery, Splendora, and Pinehurst. If you’re in one of those communities, the same pricing, the same written guarantee, and the same 365-Day Done Right Promise apply. Call us and we’ll confirm your address is in our service area.
Serving Conroe, TX - Our Local Coverage Area
We’re based in the Conroe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Conroe
If the repair is under $650 and your system is less than 10 years old, repair usually makes sense. If the heat pump is over 12 years old, uses R-22 refrigerant, or needs both a compressor and an air handler, replacement is usually the better money. In Conroe, the math tilts toward replacement faster than it does in drier climates, because an old heat pump that’s lost its efficiency is costing you real money through eight months of cooling season. Call (361) 306-9515 and we’ll give you honest numbers for both options. Estimates are free.
Yes, when it’s sized and charged correctly. Conroe’s climate is mixed-humid, which means the cooling load, not the heating load, drives the equipment selection. A properly sized heat pump will cool and dehumidify through the long summer and still deliver heat on a 35-degree January night. The problem comes when an installer treats Conroe like a heating-dominant market and sizes the unit for heat output. Get the load calculation right and the system does both jobs.
SEER2 is the updated efficiency metric for cooling, and it’s the number that matters most on a Conroe heat pump because our cooling season is so long. A higher SEER2 means lower summer electric bills. The heat pump quote we give you will list the SEER2 rating for each option, and we’ll explain what that rating translates to in real dollars on your Conroe electric bill, based on your square footage and current usage. Don’t pay for a rating you don’t understand.
Always. Every heat pump installation in Conroe starts with a room-by-room load calculation, not a square-footage rule of thumb. We measure window sizes, ceiling heights, insulation levels, and the orientation of the house. We measure static pressure on the existing ductwork. Then we select the tonnage. Skipping this step is how Conroe homes end up with oversized systems that short-cycle through August and never dehumidify properly.
Once a year, before the cooling season starts. A heat pump runs year-round in Conroe, which is double the runtime of a furnace-plus-AC setup, so the compressor, reversing valve, and coils wear faster than you might expect. A tune-up runs $80 – $200 and catches refrigerant charge drift, dirty condenser coils, and reversing valve problems before they strand you on a 100-degree July day. Our maintenance techs are not paid on what they sell, so you’ll get a written report of what was actually found. Call (361) 306-9515 to book a maintenance visit for your Conroe home.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Conroe since 2003.