Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Willis
Heat pump installation in Willis, TX typically runs $3,500 to $7,500 for a complete system replacement, depending on the size of your home and the efficiency level you choose. Most Willis homeowners get a written quote within 24 hours of calling, and installation is scheduled on a set date, not a vague window. We’re Dalton Heating & Air, a Garrison Partners company, and we’ve been holding every job to The Garrison Standard since 2003. If your heat pump is failing, short cycling, or just hit 15 years old, call (361) 306-9515 for a free estimate with the price in writing before any work starts.
Why Dalton Heating & Air Is Willis’s Preferred Heat Pump Installation Company
Willis homeowners tell us the same thing: they’re tired of crews that show up late, quote one number, and hand over a different invoice at the end. That doesn’t happen with us. The price you’re quoted is the price you pay. Every repair carries a written guarantee for a full year under our 365-Day Done Right Promise, and if the repair doesn’t hold, we return at no charge. Marco Benitez leads our team, and every technician is background-checked, uniformed, and factory-trained on nine major brands including Goodman, Rheem, York, and Daikin. When you book with us, you know who’s coming to your door before they arrive.
We answer our phones with a live person 24/7. Not a voicemail queue. Not a callback sometime tomorrow. If your heat pump dies during a Willis cold snap or a July humidity spike, you reach a real dispatcher who can route a tech to your neighborhood. We serve the entire Willis area, from the neighborhoods along FM 1097 to the subdivisions off Calvary Road and I-45. Local knowledge matters here. A heat pump sized for a house in Conroe won’t necessarily be right for a home in the Deerwood subdivision, and we’ll explain why during the estimate.
Ductless Heat Pump Installation in Willis
Ductless heat pump installation in Willis gives homeowners a way to add heating and cooling to spaces where ductwork never reached: garage workshops, sunrooms, additions, and older homes built before central air became standard. Instead of running ducts, a ductless system pairs a slim outdoor condenser with one or more wall-mounted indoor units, connected by a small refrigerant line. The job usually takes one to two days, and the full cost for a single-zone ductless heat pump installation lands within that same $3,500 – $7,500 range, depending on how many indoor heads you need and the system’s SEER2 rating.
Where Ductless Makes Sense in Willis
Many older Willis homes, particularly those built in the 1970s and 1980s, lack the ductwork to support a conventional heat pump without major drywall work. A ductless system avoids all of that. We’ve installed them in lake homes, converted garages, and second-story additions where the existing HVAC simply doesn’t reach. Because Willis summers pull so much moisture out of the air, a properly sized ductless unit can also help control humidity in rooms that always feel sticky.
What Installation Covers
Every ductless install includes a written price before work begins, a line-by-line breakdown of equipment and labor, and a set installation date. We handle the full job: mounting the indoor unit, routing the line set, wiring, charging the system, and testing both heating and cooling modes. The 365-Day Done Right Promise applies here just like any other job. If it’s not right, we make it right.
Heat Pump Service in Willis
Heat pump service in Willis covers the maintenance and repair work that keeps your system running through our Piney Woods summers and occasional winter freezes. Routine service runs $80 – $200 for a tune-up, which includes cleaning the coils, checking refrigerant charge, testing the reversing valve, and inspecting the electrical connections. Repair work runs $150 – $650 depending on the part. A failed capacitor or contactor is on the low end. A stuck reversing valve or a refrigerant leak is on the higher end. Every repair carries a written one-year guarantee, and if the repair fails within that year, we come back free.
Seasonal Tune-Ups
Willis heat pumps work year-round, which means they accumulate wear in both directions: cooling all summer, heating through the winter. We recommend a tune-up twice a year, once before the cooling season and once before the heating season. It’s the cheapest way to avoid a no-heat call during a January freeze or a no-cooling emergency in August humidity. During the visit, you get a written report of what we found, what’s wearing, and what can wait.
Repair or Service Calls
When something fails, call (361) 306-9515. We answer live, 24/7, and dispatch a technician from our Dallas-Fort Worth office to your Willis home. The tech arrives with a stocked truck, diagnoses the issue, and gives you the repair price in writing before touching a single component. No pressure. No door-to-door pricing games. If you’d rather replace than repair, we’ll show you the numbers for both.
Trusted Brands We Service in Willis
Our technicians are factory-trained on nine major residential HVAC brands, including Goodman, Rheem, York, and Daikin. That matters in Willis because a Rheem heat pump has different service requirements than a Daikin, and a tech who only knows one brand will miss things. We can pull parts locally for the brands we stock, which keeps turnaround faster than waiting on a regional distributor. If your existing system is a Goodman and you want a drop-in replacement, we can quote that. If you want to switch to a Trane variable-speed unit, we can quote that too. The price is always in writing before the job starts.
Common Heat Pump Installation Problems We See in Willis Homes
- Oversized tonnage chosen from square footage alone. Builders and some contractors size heat pumps by rule of thumb, not by load calculation. In Willis, that means short cycling, rooms that never lose their clammy feel in summer, and a compressor that wears out years early.
- Reusing old line sets and mismatched indoor coils. A new outdoor unit paired with an old indoor coil or a reused line set rarely hits its rated SEER2 efficiency. We see refrigerant charge issues and premature compressor failure from exactly this shortcut.
- Ignoring static pressure and duct sizing. Willis homes with undersized or leaky ducts make a new heat pump work harder than it should. The system runs hot, runs noisy, and can trip high-head pressure during our humid summers. A proper install checks static pressure before the new unit ever fires up.
- No surge protection on the disconnect. Heat pump circuit boards are sensitive. A single voltage spike from a thunderstorm rolling through Montgomery County can fry a control board. We recommend surge protection on every install, and it’s included in our written quote.
Pricing for Heat Pump Installation in Willis, TX
Here’s what heat pump work actually costs in Willis, based on the jobs we quote and install every month. These are real ranges, not bait.
| Service | Willis Price Range |
|---|---|
| Heat Pump Installation | $3,500 – $7,500 |
| Heat Pump Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
What moves the installation number: the size of your home, the efficiency of the unit you choose, whether ductwork needs modification, and whether you want a standard single-stage heat pump or a variable-speed unit like the Trane we installed in Deerwood. We’ll walk you through the options during the estimate, and the price you approve is the price you pay. No change orders. No surprises. Call (361) 306-9515 for a free estimate.
We Also Serve Cities Near Willis
Dalton Heating & Air handles Heat Pump Installation across the north Houston corridor. In addition to Willis, our crews regularly serve Conroe, Montgomery, Magnolia, and Pinehurst. If you’re in a neighboring town and need heat pump work done right, call us at (361) 306-9515 and we’ll get you on the schedule. We know these communities and the homes in them.
Serving Willis, TX - Our Local Coverage Area
We’re based in the Willis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Willis
A load calculation matters because Willis sits in a Piney Woods microclimate with high summer humidity and mild but freeze-prone winters. A heat pump sized on square footage alone will likely be oversized, which means it cools the air quickly but never runs long enough to pull moisture out of it. The result is a cool, clammy house and a compressor that cycles itself to death. A room-by-room load calculation, like the one we ran on the Deerwood property off FM 1097, accounts for window orientation, ceiling height, insulation, and the home’s actual envelope, not the builder’s guess. Call (361) 306-9515 and we’ll run one before quoting anything.
Repair if the unit is under 10 years old and the failed part costs less than $650, which covers most capacitors, contactors, thermostats, and even some reversing valve work. Replace if the compressor is gone, the refrigerant is an older R-22 charge you’d need to replace entirely, or the system is over 12 years old and you’re facing a repair north of $1,500. We’ll show you both numbers in writing and let you decide. No pressure either way.
A complete heat pump installation in Willis runs $3,500 – $7,500. The spread depends on home size, SEER2 rating, brand, and whether ductwork needs work. Single-stage systems land on the lower end. Variable-speed units from brands like Trane or Daikin land on the higher end but pay back through lower monthly bills and better humidity control. Call (361) 306-9515 for a free written estimate.
For Willis’s climate, we recommend a minimum of 15.2 SEER2, which is the new federal baseline, but most homeowners here are better served by 16 – 18 SEER2. The higher ratings cost more up front but pull more moisture out of the air during our humid summers, which means you feel comfortable at a higher thermostat setting. A 17 SEER2 unit in Willis will typically use 20 – 25% less energy than a 14 SEER2 unit, and you’ll notice the difference on your bill from June through September.
Yes. We install, repair, and service ductless heat pump systems across Willis, including single-zone and multi-zone setups from Goodman, Rheem, York, and Daikin. If you have a ductless system in a workshop, garage apartment, or addition, we can tune it up for $80 – $200 or repair it within our standard $150 – $650 range. Every repair is guaranteed in writing for a full year.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Willis, TX.