Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Cibolo
A heat pump installation in Cibolo typically runs $3,500 to $7,500 for a standard split system, depending on tonnage, SEER2 rating, and whether the ductwork can handle the new unit’s airflow. We serve all of Cibolo, from Steele Creek to Turning Stone to the neighborhoods west of FM 1103, with crews dispatched from our San Antonio office and arriving inside a stated window. If your heat pump has quit or you’re weighing replacement before the next Texas summer, call Marco Benitez and the Dalton Heating & Air team at (361) 306-9515. The price goes in writing before any work starts, and every repair carries a written one-year guarantee.
Why Dalton Heating & Air Is Cibolo’s Preferred Heat Pump Installation Company
Dalton Heating & Air is a Garrison Partners company operating under The Garrison Standard since 2003. For Cibolo homeowners, that means the same discipline on every job: a background-checked, uniformed technician who arrives inside the window, a written price before any work begins, and a 365-Day Done Right Promise on every installation. If a repair fails within the guarantee period, we return at no charge. That is not an upgrade or a perk. It is the standard.
We answer the phone with a live person 24 hours a day, seven days a week. No voicemail queue, no automated maze. When a heat pump quits on a 100-degree Cibolo afternoon, you reach a person who can schedule a truck. Our technicians are factory-trained on nine major residential brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That matters because a heat pump installed wrong in Cibolo clay-soil country will let you know by August.
Heat Pump Replacement in Cibolo
Heat Pump Replacement in Cibolo is a different beast than in Dallas or San Antonio proper. The Blackland Prairie clay under most of Cibolo expands and contracts with moisture, which means slab foundations shift slightly over time. An installer who does not account for that movement can leave refrigerant lines and condensate drains under stress. When we replace a heat pump here, we check the line set routing, the condenser pad, and the duct static pressure before we ever order a unit.
Replacement runs $3,500 to $7,500 for a standard split system. What moves the number is tonnage, SEER2 rating, and whether the existing ductwork can move enough air. A Cibolo homeowner with a 2,600-square-foot two-story off Wiederstein Road will likely land in the middle of that range. A smaller single-story in Buffalo Crossing sits at the lower end. The written quote covers the outdoor unit, the matched indoor evaporator coil, the line set if needed, the condensate drain, the thermostat wiring, and the startup and test procedure.
Load Calculation First
We do not reuse the old tonnage. Skipping a Manual J load calculation and simply matching the previous unit’s size is the most common mistake we correct in Cibolo. A 4-ton unit on ductwork sized for 3 tons will short-cycle, trip on high head pressure, and eat a compressor. The load calculation tells us what the house actually needs.
Variable-Speed Equipment
Most Cibolo replacements we install are variable-speed or two-stage heat pumps. They run longer at lower capacity, which pulls more humidity out of the air during those muggy September weeks when the temperature is not that high but the moisture is. A single-stage unit blasts cold air and shuts off, leaving the house clammy.
Mini Split Installation in Cibolo
Mini Split Installation in Cibolo makes sense for a lot of homes here, especially the 1980s and 1990s builds around Deer Creek and Bentwood Ranch that were framed with electric strip heat or a single central system that does not reach a converted garage or a second-story bonus room. A ductless mini split lets you condition one room or one zone without cutting into walls or reworking ductwork. Installed cost runs $3,500 to $7,500 depending on the number of indoor heads and the outdoor condenser capacity.
The big advantage in Cibolo’s climate is controllability. You can cool a west-facing upstairs bedroom to 72 while leaving the rest of the house at 76. Every indoor head has its own thermostat. The outdoor inverter compressor ramps up and down instead of cycling on and off, so you do not get that full-blast-then-off hum that a central unit produces.
Single-Zone Systems
One outdoor condenser, one indoor wall-mounted head. Good for a garage conversion, a sunroom, or a bedroom that never cools right. Simple install, usually done in a day.
Multi-Zone Systems
One outdoor condenser running two to five indoor heads. This is the right call when you want to ditch window units in three bedrooms and a den. The outdoor unit sits on a pad or wall bracket, and the refrigerant lines run through a small exterior chase.
Marco Benitez can walk you through which configuration fits your square footage and budget. Calls are answered live at (361) 306-9515.
Trusted Brands We Service in Cibolo
We install and service Rheem, York, Daikin, and Bryant heat pumps, along with five other major residential brands. For Cibolo customers, that means we can usually pull common parts from local supply stock rather than waiting on a warehouse shipment. Fast turnaround matters when a reversing valve sticks on a 40-degree morning and your home is blowing cold air while set to heat. The Garrison Standard requires factory-trained work on every brand we touch, not trial and error on your dime.
Common Heat Pump Installation Problems We See in Cibolo Homes
- Oversizing for a cold snap that never comes. Cibolo cooling seasons run long and hot. An installer who sizes the heat pump to a theoretical hard freeze puts in too much tonnage, and the unit short-cycles through summer, hammering the compressor. That is the fastest way to a dead heat pump in year five.
- Skipping the load calculation. Reusing the old tonnage when the duct system cannot move that much air is common. The new unit runs against high static pressure, trips on high head pressure, and never delivers the efficiency on the label.
- Ignoring the reversing valve and defrost controls during startup. On a cold Cibolo morning, the heat pump should shift into heating and defrost the outdoor coil when ice builds. If the installer does not verify the reversing valve cycles correctly, you get cold air when you have called for heat.
- Badly sloped condensate lines on slab homes. Cibolo’s slab-on-grade construction leaves little room for gravity pitch on drain lines. When the line sags, water backs up and trips the float switch, shutting the unit down. We see this most often in homes built between 1995 and 2010 along Green Valley Road and Turning Stone.
Pricing for Heat Pump Installation in Cibolo, TX
Here are the line-item numbers we quote in Cibolo. These are fixed written ranges, not door-to-door guesses.
| Job | Typical Cibolo Price Range |
|---|---|
| Heat pump replacement, standard split system | $3,500 – $7,500 |
| Mini split installation | $3,500 – $7,500 |
| Heat pump pre-season tune-up | $80 – $200 |
| Heat pump repair (not cooling) | $150 – $650 |
| Auxiliary/emergency heat repair | $150 – $700 |
What changes the number: tonnage, SEER2 efficiency rating, whether the indoor coil is matched, whether the existing line set can be reused, and how much airflow the ducts can handle. The estimate is free, written, and good for the job as scoped. Call (361) 306-9515 and Marco Benitez will get you a number.
We Also Serve Cities Near Cibolo
Dalton Heating & Air handles Heat Pump Installation across the I-35 corridor east of San Antonio. Our crews regularly work in Schertz, Universal City, Marion, and Converse. If you are in any of those towns and need a straight answer on repair versus replacement, call us. This page covers Cibolo specifically, but the same written-price standard applies everywhere we run trucks.
Serving Cibolo, TX - Our Local Coverage Area
We’re based in the Cibolo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Cibolo
If the compressor is still sound and the system is under 12 years old, a repair in the $150 – $650 range usually makes sense. If the unit is over 12 years old, uses R-22 refrigerant, or the compressor has failed, replacement at $3,500 – $7,500 is the better money. We give you the repair quote and the replacement quote side by side, in writing, and let you decide. Call (361) 306-9515 for a straight answer on your specific unit.
Because Cibolo’s Blackland Prairie clay and slab-on-grade homes put the cooling load, not the heating load, in charge. Most of the country sizes a heat pump to winter heating demand. Here, the correct tonnage is set by summer sensible and latent load, and oversizing for a cold snap causes short cycling that kills compressors. A Manual J load calculation measures your exact house: window orientation, insulation, duct leakage, and square footage. Matching the old tonnage skips all that and often repeats the original installer’s error.
SEER2 is the updated efficiency test that measures how much cooling you get per watt of electricity under more realistic duct-pressure conditions than the old SEER test. A 15 SEER2 unit costs less up front. A 18 or 20 SEER2 unit costs more but uses measurably less electricity. In a Cibolo summer where the heat pump runs 2,000-plus hours, the difference on your CPS Energy bill is real money, often $150 to $300 per cooling season depending on the upgrade. The written quote shows the efficiency rating and the installed price for each option.
A standard split-system heat pump installation in Cibolo runs $3,500 to $7,500. A mini split installation falls in the same range depending on the number of zones. The exact number depends on tonnage, SEER2 rating, and ductwork condition. The estimate is free and written before any work starts. Call (361) 306-9515 to get a fixed price for your home, not a ballpark.
Yes. We are factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If the unit is under manufacturer warranty, we handle the paperwork. If it is out of warranty, we give you the part price in writing before we touch it. Every repair is guaranteed in writing for a full year, and if it fails in that time, we return at no charge. Call (361) 306-9515.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Cibolo under The Garrison Standard since 2003.