Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Reno
When your furnace quits on a cold Lamar County night, you need a tech who actually answers the phone. Dalton Heating & Air does. A live person picks up 24/7 at (361) 306-9515, and we dispatch uniformed, background-checked technicians to Reno homes with the parts on the truck to fix most furnaces in a single visit. Most furnace repairs in Reno run $150 – $700, and you get the price in writing before we touch a single component. No door-price surprises, no vague verbal estimates. That is The Garrison Standard, and it has been since 2003.
We know Reno’s housing stock: 1990s and early-2000s builder-grade systems off FM 196 and County Road 27450, older gas furnaces near Reno Elementary, and a fair number of all-electric heat pump setups on acreage lots east of town. That local pattern matters because the failure modes differ, and so does the repair strategy. This page is our full Furnace Repair breakdown for Reno specifically, not a generic cut-and-paste.
Why Dalton Heating & Air Is Reno’s Preferred Furnace Repair Company
Reno homeowners call us after the last company no-showed or quoted one number and handed over an invoice with another. We hold a different line. Every job gets a written price before work starts, a written guarantee on the repair for a full year, and a free second visit if that repair fails inside the guarantee window. That is not a premium add-on. It is the baseline, because Dalton is a Garrison Partners company bound to The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Marco Benitez runs the crews that serve Reno, and he is particular about who gets sent to your door. Every technician is background-checked and in uniform, and you will know their name before they arrive. Our Reno customers consistently tell us the same two things: the tech explained the problem in plain English, and the invoice matched the quote. That is the reputation we work to protect on every call, from a simple ignitor swap to a full heat exchanger inspection.
Dispatch is coordinated from our Dallas-Fort Worth office, but the crews who show up in Reno work this territory regularly. We carry common parts for Rheem, York, Daikin, and Bryant systems on the truck, which means fewer second trips waiting on a distributor shipment.
Furnace Maintenance in Reno
Furnace Maintenance in Reno is the cheapest insurance against the exact failure we see most in Lamar County: a heat exchanger cracking on an oversized furnace that has short-cycled for a decade. A tune-up runs $80 – $200, and it should include a combustion analysis, a static pressure check, and a written report of what the tech actually measured, not just a filter swap and a sticker on the unit. If your furnace is over 10 years old and has never had a real load-informed inspection, schedule this before the next cold snap.
What a Proper Tune-Up Checks
We measure gas manifold pressure against the manufacturer spec, check the flame sensor reading in microamps, and run a combustion analyzer to catch early carbon monoxide risk. We also test the blower motor amp draw and the return static pressure, because high static is what kills blower motors and trips limit switches on Reno’s builder-grade systems. You get the numbers in writing, so there is no mystery about what was found.
When Reno Homeowners Should Schedule It
Late September through mid-October is the window before nights drop into the 40s, and that is when our Reno calendar fills. If you missed it, do not wait for the first no-heat call. A January tune-up still beats a February breakdown.
Heat Pump Repair in Reno
Heat Pump Repair in Reno covers a different set of problems than gas furnace work, because a heat pump runs year-round: heating in the winter, cooling in the summer. The outdoor unit gets worked hard by East Texas humidity and pollen, and a dirty condenser coil will quietly drive up your electric bill for months before the system finally trips. A heat pump repair typically lands in the $150 – $650 range, with compressor or reversing valve work at the upper end. If you have a Daikin or Rheem heat pump on an acreage property around Reno, we service it with the same written-price, written-guarantee terms as any gas furnace call.
Common Heat Pump Failures in Lamar County
A low refrigerant charge (topping off the fluid your system needs to reach set temperature) and a failed defrost sensor are the two we see most. A heat pump that runs constantly but never reaches the thermostat set point usually has one of these two issues, and both are repairable same-day when we have the part on the truck.
Dual-Fuel and All-Electric Setups
Some Reno homes run a heat pump paired with a gas furnace as a backup, and some run all-electric. Our techs are factory-trained on both configurations, so we do not misdiagnose a heat pump as a furnace failure or the other way around.
Trusted Brands We Service in Reno
Dalton Heating & Air is factory-trained to service nine major residential HVAC brands, and in Reno we see a heavy concentration of Rheem gas furnaces, York builder-grade units, and a growing number of Daikin and Bryant heat pumps. We stock common ignitors, flame sensors, pressure switches, and control boards for these brands at our metro warehouse, which means faster turnaround for Reno homeowners who cannot afford to wait a week for a part. Brand familiarity cuts diagnosis time in half, and it means the tech on your doorstep already knows the failure patterns for your specific model line.
Common Furnace Repair Problems We See in Reno Homes
- Limit-switch trips from high static pressure. Reno builder-grade homes frequently have undersized return ducts, and the blower motor pushes against that restriction until the high-limit switch shuts the burners off as a safety precaution. The fixes are duct sizing or blower-speed adjustment, not a new furnace. A proper static pressure test tells you which.
- Oversized furnaces short-cycling on mild winter days. Lamar County design heating load sits around 25 – 28°F, which is genuinely moderate. When a contractor installs a furnace on a rule-of-thumb tonnage guess instead of running a load calculation, the unit overshoots the set point, shuts down, and restarts constantly. That cycle stresses the heat exchanger and shortens its life.
- Failing ignitors on 10 – 15 year old gas furnaces. Hot-surface ignitors crack with age, and the failure happens without warning. This is a straightforward replacement in the $150 – $350 range depending on brand, a small repair compared to what a January no-heat weekend does to your comfort.
- Undiagnosed cooling problems hiding in dual-fuel homes. A dirty condenser coil or low refrigerant charge on the paired AC side gets ignored during furnace-only tune-ups in the fall, then turns into a no-cooling emergency when the first 90-degree week hits. A full-system tune-up catches it months before it costs you a summer weekend.
Pricing for Furnace Repair in Reno, TX
Here is the honest range for Reno’s market. A minor electrical repair like a capacitor or ignitor runs $150 – $350. A gas valve replacement or blower motor repair lands between $350 – $700. A heat exchanger replacement pushes toward the top of the scale and is when the repair-versus-replace conversation gets real. We do not charge overtime for nights or weekends, and every call includes a free written estimate before work begins. You will see the dollar figure on paper before you approve a single part.
| Service | Reno Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| AC Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
We Also Serve Cities Near Reno
Dalton Heating & Air handles furnace and HVAC calls across the wider region. If you are outside Reno proper, we also serve Houston, San Antonio, Dallas, and Fort Worth. See our full Furnace Repair in Reno coverage or call (361) 306-9515 to confirm your address is in our service area.
Serving Reno, TX - Our Local Coverage Area
We’re based in the Reno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Reno
It tells you the real heating capacity your home needs, and in Reno that is often less than what a rule-of-thumb installer stuffed into the attic. A proper Manual J load calculation on a Lamar County home with design temps near 25 – 28°F frequently shows the existing furnace is oversized, sometimes by half a ton or more. Downsizing to correct capacity ends short-cycling, lowers gas consumption, and extends heat exchanger life. It is the difference between buying a furnace for a house in Minneapolis and buying one for a house in Reno. Call (361) 306-9515 if you want a load-calculated replacement quote instead of a sales guess.
For furnaces, SEER2 is not the relevant metric; that applies to cooling. What matters on the furnace side is AFUE, or Annual Fuel Utilization Efficiency. Reno builders in the 1990s and early 2000s commonly installed 80% AFUE furnaces, and stepping up to a 90 – 96% AFUE unit cuts your natural gas bill measurably. On the paired AC or heat pump side, a SEER2 rating of 15 – 16 is the value sweet spot for East Texas climate; higher SEER2 numbers cost more upfront and pay back slowly unless paired with serious humidity management. Call (361) 306-9515 and a tech will explain what the AFUE and SEER2 numbers mean on your actual utility bill, not in a brochure.
It depends on the part and the condition of the heat exchanger, and that is not a dodge. A $200 ignitor on a 15-year-old furnace with a clean heat exchanger and normal static pressure is a no-brainer. A $700 blower motor on a unit that has been short-cycling for years and shows heat exchanger stress is closer to a coin flip, and we will tell you that plainly before any work starts. The written estimate includes our recommendation, and we do not pay techs on what they sell. Call (361) 306-9515 if you want an honest repair-versus-replace read from someone who is not trying to sell you a new unit.
It is almost always high return static pressure. We had a tech at a home off FM 196 in the Reno area last January on a no-heat call where the Carrier furnace would light and then trip its high-limit switch after about six minutes. The return static pressure read 0.82 in. w.c., well above the 0.50 target, because the undersized return duct could not handle the blower motor’s airflow. We corrected the return sizing, verified the heat exchanger with a combustion analyzer (no cracks found), and the furnace went back to a steady 18-minute run cycle with normal discharge temperatures. A less thorough company would have sold that homeowner a new furnace. The real fix cost a fraction of that. Call (361) 306-9515 and ask for a static pressure check before you accept a replacement quote.
Yes. Heat pumps, dual-fuel setups, straight gas furnaces, and all-electric systems are all in our service wheelhouse. We stock parts for Rheem, York, Daikin, and Bryant heat pumps specifically because they are common in Reno and the surrounding Lamar County acreage. A heat pump repair runs $150 – $650, the same written-price and written-guarantee terms as any furnace call. Call (361) 306-9515 for a free estimate on either system.
Call Dalton Heating & Air for Furnace Repair in Reno
When your furnace goes down, call a company that answers. (361) 306-9515 gets you a live person 24 hours a day, and a uniformed, background-checked technician will be dispatched to your Reno address with a written price before any work starts. Every repair carries a full-year written guarantee, and if the work does not hold, we return free. That is what Dalton Heating & Air has stood for since 2003, and it is The Garrison Standard on every job in Reno.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Reno and the surrounding Lamar County area.