Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Maitland
Furnace repair in Maitland typically runs $150 – $700 depending on the part that failed, and most jobs are completed the same day we diagnose them. We work throughout Maitland, from the lakefront streets off Dommerich Drive to the neighborhoods around Howell Branch Road and east to the I-4 corridor. When your heat kicks on during one of Central Florida’s cold snaps and you get nothing but cold air or a system that short-cycles, call (361) 306-9515 and a live person answers, day or night. We show up inside the window we give you, put the price in writing before any work starts, and stand behind the repair for a full year.
Why Dalton Heating & Air Is Maitland’s Preferred Furnace Repair Company
Maitland homeowners call us because they’ve been through the other kind of experience: the tech who doesn’t show, the quote that changes at the door, the repair that fails in six weeks. Dalton Heating & Air operates under The Garrison Standard, which means we do not leave you guessing. The price is in writing before any work begins. The repair is guaranteed in writing for a full year. If it fails in that time, we return at no charge. No fine print, no upgrade pitch, no surprise line items.
Marco Benitez leads our team, and every technician who arrives at a Maitland home is background-checked, uniformed, and factory-trained to service nine major HVAC brands including Rheem, York, Daikin, and Bryant. We answer the phone with a live person 24/7, not a voicemail queue. Our local reputation in Maitland is built on showing up inside the stated window and doing the job by the book, per The Garrison Code.
Furnace Maintenance in Maitland
Furnace Maintenance in Maitland is less about the heating season and more about what 10 months of near-constant AC use does to the same blower motor, capacitor, and air handler that push heat in January. A furnace that sits idle from March through December isn’t resting; it’s accumulating dust on the heat exchanger and corrosion on electrical contacts. In Maitland, a tune-up costs $80 – $200 and should happen once a year, ideally in late fall before the first cold front.
Cleaning and Inspection
The core of a tune-up is cleaning the heat exchanger, checking the burner assembly, and verifying the blower motor draws the right amps. Dust that settled during AC season is a real fire risk on the first ignition of the year. Our techs clean the burners and exchanger, then run a full combustion check to catch cracks or delayed ignition before they become a carbon monoxide issue.
Airflow After a Long Cooling Season
Dirty evaporator coils and a restricted filter reduce airflow across the heat exchanger, which is why some Maitland furnaces trip on high-limit and blow lukewarm air in January. A tune-up includes a static pressure check and blower inspection. We catch weak capacitors and restricted airflow now, not on a 38-degree night when the system is cycling on safety limits.
Heat Pump Repair in Maitland
Heat Pump Repair in Maitland often happens in January, when a system that cooled fine all summer suddenly can’t produce enough heat. The same refrigerant that moves heat out of your house in July moves heat into it in January, but defrost boards, reversing valves, and the outdoor coil can fail after months of sitting in heating mode for only a few hours. Repair typically runs $150 – $700, which includes a full diagnosis and a written, fixed price before we begin.
Iced-Over Outdoor Units
A defrost board that fails will leave the outdoor coil covered in ice on a 40-degree Maitland night. We see it every winter. The unit may still come on, but it can’t move heat. We test the defrost sensor and board, verify the reversing valve shifts, and replace what’s actually failed. Not a guess, not a “let’s try this and see.”
Low Refrigerant and Seasonal Charge Loss
Because Maitland heat pumps run in heating mode only a few weeks a year, a small refrigerant leak from July can go unnoticed until December, when there isn’t enough charge to pull heat from cold outdoor air. Our techs check subcooling and superheat, not just pressure, and we only add refrigerant after finding and repairing the leak. Topping off a leaking system is a temporary fix that costs you twice.
Trusted Brands We Service in Maitland
Our technicians are factory-trained on Rheem, York, Daikin, and Bryant equipment, along with Carrier, Trane, Lennox, Goodman, and American Standard. We keep common Maitland parts on the trucks: ignitors, flame sensors, capacitors, gas valves, and heat pump defrost boards. That means fewer second visits and shorter no-heat windows when a cold front moves through. If the part is less common, our Orlando-area supply network usually has it the same day. You won’t wait a week for a furnace repair because of a backordered part.
Common Furnace Repair Problems We See in Maitland Homes
- Blower motor capacitors failing after cooling season. From May through October, your blower runs almost constantly. The capacitor that starts it takes the stress, weakens silently, and shows up as a furnace that hums but doesn’t move air on the first cold night of winter. This is the single most common repair we make in Maitland.
- Heat exchangers and burners coated in AC-season dust. A year of unfiltered return air pulls fine dust across the heat exchanger and burner assembly. When the burners fire for the first time in months, that dust burns off, but it can also cause delayed ignition and micro-cracks. Regular cleaning prevents brittle metal and carbon monoxide risk.
- Heat pump defrost boards failing on 40-degree nights. A heat pump in Maitland only has to heat a few times a year, so a defrost board fault can sit dormant for 11 months. It shows up as a frozen outdoor coil on the coldest night of the year. We replace the board and verify the sensor, restoring proper defrost cycles.
- Gas valves sticking after months of inactivity. An unused gas valve can develop a sticky diaphragm or corrosion on the solenoid. The furnace either won’t ignite at all or fires intermittently. We test inlet and outlet pressures, check the thermocouple, and replace the valve when it’s failed, not when it’s “acting up.”
Pricing for Furnace Repair in Maitland, FL
Most furnace repairs in Maitland run $150 – $450. A failed ignitor or flame sensor sits at the lower end, while a gas valve or blower motor replacement pushes toward the $500 – $700 range. Heat pump repair in Maitland also runs $150 – $700, with defrost board and reversing valve work falling at the higher end. You’ll know your exact price before we start, in writing. Our free estimate covers the diagnostic visit: we find the problem, quote the repair, and you decide. No hour-long sales pitch, no pressure, no “manager special” if you sign today.
| Service | Typical Maitland Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Heat Pump Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
For an exact quote on your system, call (361) 306-9515. Estimates are free, and the number you hear is the number you pay.
We Also Serve Cities Near Maitland
Our Furnace Repair team covers the full Maitland area plus Winter Park, Altamonte Springs, Casselberry, and Orlando. If your furnace is down and you’re in one of these nearby cities, the same written pricing and full-year guarantee apply. We schedule by neighborhood, not by zip code algorithm.
Serving Maitland, FL - Our Local Coverage Area
We’re based in the Maitland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Maitland
Yes. The long idle period is exactly why a tune-up matters. Your system spends 10 months moving cool air and collecting dust, then fires up on the coldest night. A $80 – $200 tune-up catches weak capacitors, dirty burners, and restricted airflow before they become a $500 repair or a cracked heat exchanger. For Maitland specifically, a tune-up should happen in late fall. Call (361) 306-9515 and our Furnace Repair in Maitland team will get you scheduled.
If the repair cost is under half the price of replacement and your system is under 12 years old, repair usually makes sense. In Maitland, the equation shifts because your furnace does so little heating; the blower motor and air handler do the real work year-round. A heat exchanger crack on a 15-year-old unit usually means replace, not patch. We’ll give you honest numbers for both options and let you choose. The estimate is free.
It matters more than most homeowners realize. Oversized heating equipment short-cycles, which stresses the heat exchanger and blower motor. Undersized equipment runs constantly and never satisfies the thermostat in a cold snap. Because Maitland’s winter overnight lows only dip into the 30s and 40s, a properly sized system handles both seasons. We run load calculations on replacement jobs and on repairs where airflow or sizing is suspect. It’s the difference between fixing the symptom and fixing the system.
For a Maitland home, aim for SEER2 16 – 18 on a new system. Our electric rates aren’t Northern rates, and our cooling season is long, so efficiency matters more in summer than winter. Higher SEER2 ratings pay off fastest in cooling-dominated climates. We can show you the actual bill difference between SEER2 14 and SEER2 18 based on your current usage, not a brochure estimate.
Yes. Heat pump repair is a significant part of our winter work in Maitland, and it’s covered under our full-year written guarantee. We also offer our Heat Pump Installation in Maitland when replacement makes more sense than repair. If the outdoor unit is iced over on a 40-degree night, the defrost system has likely failed. If it runs but blows cold, the reversing valve or refrigerant charge is suspect. Either way, we diagnose it, quote it in writing, and fix it the same day when parts are available. Call (361) 306-9515 now.
A Word About Maitland’s Climate and Your Furnace
Maitland sits in a pocket of Central Florida where winter overnight lows routinely dip into the 30s and low 40s for a handful of nights each season. That’s enough to trigger furnace and heat pump calls, but not enough to justify the oversized heating equipment that northern transplants often assume they need. Because the same air handler and blower motor that pushes heat in January also handles the AC load in July, furnace repair decisions here are really whole-system decisions about airflow and tonnage, not just a heating fix.
A homeowner near Lake Sybelia called us in January when their Carrier furnace was short-cycling and blowing lukewarm air. Our tech traced it to a weak capacitor on the blower motor and a heat exchanger coated in dust from a year of AC-only operation. We replaced the capacitor, cleaned the exchanger, and recalibrated the thermostat. The unit held temperature through the next cold snap. On a follow-up visit we ran a load calculation and confirmed the 3-ton system was correctly sized for the home, so we marked it repair, not replace. That’s the kind of answer you get when the tech understands Maitland’s actual heating load, not a cold-climate script.
Call Dalton Heating & Air for Furnace Repair in Maitland
If your furnace is down, short-cycling, or blowing cold air, call (361) 306-9515. A live person answers 24/7. We’ll schedule you inside a two-hour window, send a background-checked technician who knows Maitland homes, and put the repair price in writing before any work starts. The job is guaranteed for a full year. If it fails in that time, we come back at no charge. That’s The Garrison Standard, and it’s how we’ve done business since 2003.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Maitland and the surrounding Central Florida area.