Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Keene
Most furnace repairs in Keene run between $150 and $700, and a trained Dalton Heating & Air technician can usually be at your door the same day you call. If your furnace is blowing cold air, short-cycling, or won’t start at all, call (361) 306-9515 and we’ll send someone from our Furnace Repair team who knows Keene’s housing stock and the furnaces in it. You get the diagnosis, the price in writing, and the work done by the book – that’s how we operate in Keene and everywhere else we serve.
Keene sits at the southern edge of the DFW metro where the heating load is real but modest. That means the right furnace for most homes here is smaller than what a big-city contractor might quote by rule of thumb. We size the repair to the system you actually have, not the one a sales sheet says you should buy.
Why Dalton Heating & Air Is Keene’s Preferred Furnace Repair Company
Keene homeowners call us when they’re done with no-shows and prices that shift at the door. We’ve been operating under The Garrison Standard since 2003, which means every call gets a background-checked, uniformed technician, a written price before any work starts, and a written guarantee on every repair. The Garrison Code is specific: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Marco Benitez leads our team, and he holds every technician to those terms on every job. When you schedule with us in Keene, you know who is coming before they arrive. They’ll be in uniform, they’ll have the parts for your furnace brand on the truck or ready at the supply house, and they won’t leave until the repair is verified and the work area is clean.
Our 365-Day Done Right Promise covers every furnace repair we do. If the repair fails within a year, we return at no charge. That’s not an upgrade or an add-on. It’s the standard.
Boiler Repair in Keene
Boiler Repair in Keene typically costs $150 to $700 depending on the part that failed and the age of the unit. A homeowner in Keene needs boiler service when radiators in older homes along Old Betsy Road or near the historic core stop heating evenly, when the pressure gauge drops, or when the boiler short-cycles and can’t hold temperature on a cold January morning. Boilers are less common in Johnson County than forced-air furnaces, but the homes that have them need a technician who knows the specific failure patterns, not someone learning on the job.
Pressure and Circulation Repairs
Low boiler pressure or a circulator pump that’s failing shows up as cold radiators on one side of the house and hot ones on the other. We trace the system, identify the restriction or the failing component, and replace only what’s actually bad. No boiler job gets a “let’s try this and see” approach.
Burner and Ignition Work
When a Keene boiler fires erratically or not at all, the problem is usually in the ignition circuit, the gas valve, or the burner assembly itself. We rebuild, replace, and verify combustion before we leave. The repair is guaranteed in writing for a full year; if it fails in that time, we return at no charge.
Gas Furnace Repair in Keene
Gas Furnace Repair in Keene runs $150 to $700 for most jobs, with blower motor replacements and capacitor failures clustered in the middle of that range. When a Keene homeowner calls on the first genuinely cold night of the year and their gas furnace won’t fire, the cause is usually an ignition or control-board fault, a weak capacitor on the blower circuit, or a high-limit trip from an overheating heat exchanger. We diagnose the exact failure and put the fix in writing before anyone turns a wrench.
Ignitor and Gas Valve Failures
An ignitor that glows but won’t light the burner, or a gas valve that opens and closes erratically, are common no-heat culprits. We test the circuit, confirm gas pressure, and replace the failed component with a factory-correct part for your furnace brand.
Blower Motor and Capacitor Work
If your Keene furnace runs but won’t move air, the blower motor or its capacitor has likely failed. High static pressure from undersized or dirty ductwork – common in older Keene homes – shortens blower motor life. We replace the motor or capacitor and check airflow so the new part isn’t condemned to the same early death.
Trusted Brands We Service in Keene
Our technicians are factory-trained to service nine major residential HVAC brands, including Rheem, York, and Daikin. If your Keene home has a Rheem gas furnace, a York system, or a Daikin unit, we carry the common repair parts on our trucks and can get uncommon ones same-day from local supply houses. We also service Bryant equipment. The parts go in fast because our techs know these systems by their actual model numbers, not by guessing at a wiring diagram on the tailgate.
Common Furnace Repair Problems We See in Keene Homes
- Oversized furnaces short-cycling and tripping the high-limit. Keene’s winters are mild-cool with only occasional hard freezes, which means furnaces sized by square footage instead of a proper load calculation run too hot and too often. The high-limit trips, the home cools down, and the cycle repeats – it’s a repair that looks like a mystery until you check the sizing.
- Heat exchanger and blower motor failures from high static pressure. Older Keene homes often have undersized or dirty ductwork, and that restriction makes the blower work harder than it should. We see heat exchanger cracks and burned-out blower motors that trace back to the same root cause.
- Ignition and control-board faults on the first cold night. The first hard freeze of the season brings a wave of no-heat calls. Ignitors crack, capacitors fail, and control boards that worked fine in October won’t fire in January. We keep the common parts stocked for exactly this pattern.
- Repeated spending on a furnace past its useful life. When a Keene homeowner has put $400 into repairs twice in the same season, the honest conversation is repair-versus-replace. A SEER2-era replacement often pays back faster than expected on a Johnson County utility bill, and we’ll run those numbers with you before anyone touches a wrench.
One recent call near Keene’s Old Town area stands out. A homeowner said their Carrier gas furnace was firing for a few minutes, tripping the high-limit, and shutting down – over and over. We traced the fault to a restricted heat exchanger airflow path and a blower motor pulling well above its rated static pressure. We cleaned the exchanger, verified the gas furnace’s airflow, and recalibrated the thermostat. The short-cycling stopped and the home held temperature for the first time all winter. That’s the discipline that separates a real fix from a parts roulette.
Pricing for Furnace Repair in Keene, TX
Here’s what furnace repair actually costs in Keene. These are the price ranges we quote, and the price is in writing before any work starts – on every job, without exception.
| Service | Typical Price Range |
|---|---|
| Furnace Repair (diagnostic and repair) | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
| Blower motor replacement | $150 – $700 |
| Capacitor replacement | $150 – $700 |
What moves a job from the low end to the high end is the part itself. A capacitor replacement lands near the bottom. A blower motor or control board gets you to the mid and upper range. You’ll know the number before we start, and the repair is guaranteed in writing for a full year. Call (361) 306-9515 for a free estimate on any furnace repair in Keene.
We Also Serve Cities Near Keene
Our furnace repair coverage extends from Keene into Cleburne, Joshua, Alvarado, and Burleson. When you call our Furnace Repair team, we route the nearest technician to your address, whether you’re near the Keene city limits or a few miles down 174 toward Cleburne.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Keene
A short-cycling furnace in Keene is usually a repair first: a dirty airflow path, a failing blower capacitor, or an improperly calibrated thermostat. But if the furnace is oversized for the home’s actual heating load – common in Keene where the mild climate means smaller equipment works better – replacement with a correctly sized unit is the only real fix. We’ll tell you which one you’re looking at, and why. Call (361) 306-9515 for an honest diagnosis.
SEER2 is a cooling efficiency metric, but it matters for your heating bill indirectly – a SEER2-rated system is typically a matched heat pump or gas furnace and coil set that runs more efficiently in both seasons. For a Keene home, where the heating load is modest, a properly sized SEER2-era system can lower energy use versus an older oversized unit that short-cycles. The savings show on the bill, not in a brochure. We’ll run the numbers for your house before you buy.
Most furnace repairs in Keene run $150 to $700, with small electrical failures at the low end and blower motors or control boards at the high end. The price is in writing before any work starts, and the repair is guaranteed in writing for a full year. If it fails in that time, we return at no charge.
We service Rheem, York, Daikin, Bryant, and four other major residential brands: Carrier, Trane, Lennox, Goodman, and American Standard. Nine brands total, factory-trained, with common parts on the truck and uncommon parts same-day from local supply houses. If your Keene furnace has a brand name on it, odds are we work on it weekly.
A load calculation measures the actual heating demand of your specific home – square footage, window orientation, insulation, ductwork condition – instead of guessing by square footage alone. In Keene, where winters are real but modest, the calculation often shows you need a smaller furnace than a rule-of-thumb quote would suggest. That means fewer short-cycles, longer equipment life, and a lower utility bill. If a contractor quotes a replacement without one, that’s a red flag.
For furnace repair in Keene with a written price and a full-year guarantee, call (361) 306-9515. We answer live, 24/7, and estimates are free.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Keene and the surrounding Johnson County communities.