Furnace Repair in Franklin - On-Site Today, Diagnosis First

Fast, Reliable Furnace Repair Across Franklin

Furnace repair in Franklin, TN typically runs $150 – $700 for diagnosis and a common part replacement, and most no-heat calls can be reached the same day. If your furnace is short-cycling, tripping the high-limit, or blowing cold air, you want a technician who knows Franklin’s housing stock well enough to fix the actual problem instead of quoting a replacement you may not need. That is the standard our Furnace Repair team works to on every call. Dalton Heating & Air dispatches local crews to Franklin from our Memphis metro office, and a live person answers the phone 24/7 at (361) 306-9515.

Call (361) 306-9515

Key Takeaways:

• Most Franklin furnace repairs land between $150 – $700, with a written price before any work starts.
• Every repair carries a full-year written guarantee; if it fails, we return at no charge.
• We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard.
• Franklin’s mixed housing stock means correct sizing and airflow matter more than most techs admit.

Why Dalton Heating & Air Is Franklin’s Preferred Furnace Repair Company

Franklin homeowners tend to be specific about who they let into the house. That works in our favor. Dalton Heating & Air is a Garrison Partners company, founded in 2003 and held to The Garrison Standard on every visit: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. No exceptions, no fine print.

Marco Benitez leads our team with a simple rule: the repair has to hold, or we come back free. That guarantee is written, not implied. Homeowners around Cottonwood, Fieldstone Farms, and the neighborhoods off Mack Hatcher Parkway have called us after other companies diagnosed a full replacement on a furnace that needed a $200 ignitor. We would rather fix the right part and earn the next call.

Every technician who arrives at a Franklin door is background-checked, uniformed, and factory-trained on nine major residential brands. You know who is coming before they pull in the driveway. That matters when it is 20 degrees out and your heat has been down since morning.

Heating Repair in Franklin

Heating repair in Franklin is not one-size-fits-all, and anyone who treats it that way is guessing at your expense. A 1990s subdivision home off Murfreessee Road was built on a different set of assumptions than a post-war ranch near 5th Avenue North. The right repair starts with the right diagnosis: checking gas pressure, testing the ignitor, reading static pressure, and verifying the heat exchanger is sound before anyone quotes you a part.

When a Franklin homeowner calls for heating repair, it usually comes down to one of three things: the furnace will not light, it lights and then trips the limit, or it runs but the blower will not move warm air. Each has a different fix and a different price. Most heating repairs in Franklin fall between $150 and $700 for diagnosis and a common part replacement. You will always have a written price before our team picks up a tool.

Ignitor and gas valve work

Modern furnaces fire through a hot-surface ignitor, and when that part fails, the furnace refuses to light at all. Replacement in Franklin typically runs $150 – $350. A gas valve failure is less common but more involved; expect $250 – $500 depending on the unit. Neither requires a replacement furnace unless the heat exchanger has failed.

Blower motor and limit-switch repairs

If your furnace fires and then shuts off after a few minutes, you are likely looking at an airflow problem, a dirty filter, or a failing blower motor. Blower motor replacement in Franklin runs $350 – $650 on most units. A tripping high-limit is frequently a ducting or sizing issue we can correct without replacing the furnace.

Boiler Repair in Franklin

Boiler repair in Franklin is a smaller slice of the local heating market, but it shows up in older homes near the Historic Franklin district and the post-war neighborhoods off Hillsboro Road. Boilers move heat through water instead of air, and when a circulator pump or pressure relief valve fails, the system stops warming the house in a way a furnace owner would not recognize. Our techs are trained on hydronic systems and diagnose boiler problems the same way we approach furnaces: find the failed component, price the repair in writing, and only recommend replacement when the heat exchanger or block is genuinely done.

Most boiler repairs in Franklin run $150 – $700 depending on the part. A circulator pump replacement lands between $350 and $600. A bad aquastat or relief valve is usually $150 – $300. If you have radiators or baseboard heat and the house is not warming evenly, we check pump flow, air-locked zones, and boiler pressure before anything else.

Circulator pump and zone valve work

Boilers with multiple heating zones depend on zone valves that open and close on command. When one sticks, one part of the house stays cold while another runs fine. That repair in Franklin typically runs $200 – $450 depending on valve brand and access.

Pressure and temperature control repair

A boiler that short-fires or constantly shuts down usually has a failed pressure control or temperature sensor. The diagnosis confirms the problem before any part is ordered. In Franklin, these repairs are commonly $150 – $350.

Trusted Brands We Service in Franklin

We work on all nine major residential HVAC brands, and we keep common Goodman, Rheem, and Daikin parts stocked on our Franklin-bound trucks so a simple repair does not wait on a parts run across the county. York units show up often in Franklin’s older subdivisions, and we carry ignitors, pressure switches, and flame sensors for those. If your furnace is a brand we do not regularly stock locally, we get the part fast from our Memphis supply chain and keep you informed on the timing. Brand loyalty should not force you into a replacement; a properly stocked truck fixes a lot of what people assume is fatal to a furnace.

Common Furnace Repair Problems We See in Franklin Homes

• Oversized furnaces short-cycling in newer subdivisions. Builders in areas like Fieldstone Farms and Westhaven sometimes spec larger furnaces than the load needs. They reach temperature too fast, trip the high-limit, and wear out heat exchangers years early.
• Undersized return ducts in older post-war homes. Homes near downtown Franklin built in the 1950s and 1960s often have return ducting too small for modern blowers. High static pressure starves the motor and trips the furnace on limit.
• Ignitors and flame sensors failing mid-winter. These are wear items on every modern furnace, and they fail most often during Franklin’s coldest stretches from December through February.
• Short-cycling from incorrect thermostat settings. A thermostat mounted in direct sun or a drafty hallway misreads temperature and cycles the furnace too often. We see this in homes with south-facing wall mounts near Cool Springs.

Pricing for Furnace Repair in Franklin, TN

We Also Serve Cities Near Franklin

Dalton Heating & Air runs repair calls to Franklin and the surrounding communities, including Brentwood, Nolensville, Fairview, and Spring Hill. If you are outside Franklin proper but need furnace work, the same written pricing and one-year guarantee apply. For full details on how we serve the area, see our Furnace Repair in Franklin hub page.

FAQs About Furnace Repair in Franklin