Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Columbus
When your furnace quits during a Columbus January, you need a straight answer and a fast fix. Most furnace repairs in Columbus run $150 – $700 depending on the part, and Dalton Heating & Air gets a background-checked, uniformed technician to your door inside the promised window. We answer the phone with a live person 24/7, so when your house on the north side of Columbus is losing heat at 2 a.m., you’re not leaving a voicemail. Call (361) 306-9515 and you’ll get a written price before any work starts, on every job. That’s The Garrison Standard, and it’s been the rule since 2003.
Why Dalton Heating & Air Is Columbus’s Preferred Furnace Repair Company
Columbus homeowners call us because we write the price down before we touch a screwdriver. Marco Benitez leads our team, and he holds every job to The Garrison Code: arrive inside the stated window, put the price in writing, do the repair by the book, leave the site clean, and stand behind the work for a full year. That’s not a sales pitch. It’s in writing on every service call.
Our Furnace Repair team works on all nine major residential HVAC brands, including Rheem, York, and Bryant. Columbus customers regularly tell us the same thing: they’d been burned by a no-show or a price that changed at the door. We answer with specifics, not promises. The repair is guaranteed in writing for a full year. If it fails in that window, we return at no charge. That’s the 365-Day Done Right Promise, and it applies to every job we do in Columbus.
Dispatch and scheduling are coordinated from our Cleveland office, but the crews serving Columbus live and work here. They know the difference between a furnace cycling properly in a Victorian Village foursquare and one short-cycling in a Dublin ranch. That local knowledge changes how fast we diagnose the problem and how accurately we quote the fix.
Heating Repair in Columbus
Heating Repair in Columbus means diagnosing and fixing the components that actually make heat: the ignitor, flame sensor, gas valve, blower motor, and heat exchanger. The work typically costs $150 – $700, and the price is in writing before we start. Columbus furnaces work harder than equipment in warmer Ohio River cities because our January lows sit in the low 20s, so the burners run at or near full-fire for weeks at a time. That sustained load is why we see more heat exchanger cracks and blower motor burnout here than in Cincinnati or Dayton.
Ignitor and Flame Sensor Failures
The ignitor is the part that lights the gas; the flame sensor confirms the burn actually started. Freeze-thaw swings push indoor humidity around, and that moisture stress shows up as ignition faults. We diagnose which part failed, replace it, and check the full sequence before we leave.
Blower Motor and Limit Trip Repairs
Older Columbus homes often have return ducts sized for the original furnace, not the higher-BTU unit someone installed later. The result is high static pressure, dirty filters, and limit trips that shut the system down. We find the actual cause, not just the symptom, and quote the repair in writing.
Boiler Repair in Columbus
Boiler Repair in Columbus covers hydronic systems, the ones that heat water and circulate it through radiators or baseboards. Boilers are common in older Columbus neighborhoods like Clintonville and German Village, where the housing stock predates forced-air central heating. Repairs run $150 – $700, and the same written-price rule applies. A boiler that’s losing pressure or making banging noises is a real problem, and we fix it the same way we fix furnaces: diagnose the exact fault, write the price, get your approval, and do the work.
Pressure and Expansion Tank Issues
A boiler that drops pressure or trips its relief valve usually has a failed expansion tank or a fill-valve problem. We test system pressure, check the tank, and replace only what’s actually broken. No upselling, no do-it-while-you’re-here surprise charges.
Circulator Pump Diagnostics
If some rooms in your Columbus home are warm while others stay cold, the circulator pump may be failing. We check flow, amp draw, and valve operation before quoting the repair. Boiler work has its own failure patterns, and our techs know the difference.
Trusted Brands We Service in Columbus
We’re factory-trained to service nine major residential HVAC brands, and the Columbus customers we visit most often have Rheem, York, Daikin, or Bryant equipment. That training matters when a York gas valve needs replacement or a Rheem control board is throwing a code. We stock common parts for these brands across our Columbus service area, which means faster turnaround on repairs. You won’t wait three days for a part to ship in from out of state.
Common Furnace Repair Problems We See in Columbus Homes
- Heat exchanger cracks from sustained full-fire operation. Columbus furnaces run near maximum output for weeks in January and February. That thermal stress is the main reason we find cracked heat exchangers, and it’s a safety issue that demands immediate attention.
- Blower motor burnout from oversized equipment. A furnace that’s too big for the house cycles constantly and works the blower motor harder than it was designed to run. The 100,000 BTU unit in an 80,000 BTU house fails faster. We run load calculations to stop this pattern.
- Ignition faults from freeze-thaw humidity swings. Columbus’s winter temperature swings push moisture through the combustion chamber. That stress shows up as dirty flame sensors and failed ignitors, especially in furnaces more than ten years old.
- Limit trips from undersized return ducts in older housing stock. Clintonville and Victorian Village homes built before forced-air sizing standards often can’t move enough return air for a modern furnace. The result is high static pressure and safety-limit shutdowns that look like furnace failures but are actually duct problems.
Pricing for Furnace Repair in Columbus, OH
Every repair we quote in Columbus gets a written price before work begins. That price includes the diagnostic, the part, and the labor, and it doesn’t change at the door. Here’s what Columbus homeowners typically pay:
| Service | Price Range |
|---|---|
| Furnace Repair (diagnostic + standard repair) | $150 – $700 |
| Boiler Repair (diagnostic + standard repair) | $150 – $700 |
| Tune-Up | $80 – $200 |
| AC Repair (same-visit comfort-system check) | $150 – $650 |
The part that failed drives most of the cost. An ignitor or flame sensor runs on the lower end; a blower motor or gas valve on the higher end. Estimates are free, and the price is never an estimate once we’ve diagnosed the problem. Call (361) 306-9515 for an exact quote.
We Also Serve Cities Near Columbus
Our crews handle furnace repair across the Columbus metro, including Westerville, Powell, Dublin, and Hilliard. We know the housing stock and the heating patterns in each of those communities. Wherever you are in the Columbus area, the same written-price guarantee and full-year repair warranty apply. Response times to the suburbs are typically same-day for no-heat calls.
Serving Columbus, OH - Our Local Coverage Area
We’re based in the Columbus area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Columbus
If the repair costs less than a third of a new system and the furnace is under 12 years old, repair it. If the heat exchanger is cracked or the blower motor is dead on a furnace over 15 years old, replacement is usually the better math. We give you both numbers in writing and let you decide. Call (361) 306-9515 for an honest assessment, not a sales pitch.
A load calculation measures your home’s actual heating need instead of copying the old furnace’s nameplate. In Columbus, many older homes have oversized furnaces, and replacing like-for-like means you overpay to run equipment that wears out faster. We ran a Manual J on a Clintonville two-story and found a 100,000 BTU furnace doing a job an 80,000 BTU unit could handle. That changed the quote by hundreds of dollars and extended the equipment’s life.
AFUE measures how much of the fuel you buy becomes heat. An 80% AFUE furnace wastes 20 cents of every gas dollar; a 96% unit wastes 4 cents. SEER2 measures cooling efficiency the same way. On a Columbus January gas bill, the difference between an 80% and 96% furnace is real money. We’ll show you the payback math before you spend on a replacement.
Same day, and usually within a few hours for Columbus proper. We answer the phone live 24/7, so a no-heat call at 2 a.m. gets a real person and a real dispatch window. The extreme cold in January makes a failed furnace genuinely dangerous, so no-heat calls get priority scheduling. Call (361) 306-9515.
Yes. Boiler repair is a standard service for us, especially in older Columbus neighborhoods where hydronic heat is common. The same written-price rule and 365-Day Done Right Promise apply. Boiler repairs run $150 – $700, same as furnaces.
The Columbus Heating Reality Most Generic Pages Skip
Columbus’s heating load is driven by sustained January lows that hover in the low 20s, so furnaces here spend far more of their life at or near full-fire than in warmer Ohio River cities like Cincinnati. That makes heat exchanger and blower motor wear, not short-cycling, the usual failure pattern. Local gas utility rebates for high-efficiency furnaces have also been tied to verified load calculations, which is why we size equipment to Manual J rather than copying the old nameplate.
Here’s what that looked like on a recent call. We were called to a 1920s two-story in Clintonville where the homeowner had no heat on a 19-degree morning. Our tech found the blower motor pulling high amps and a cracked heat exchanger in a 22-year-old Carrier. We ran a load calculation before recommending anything, which showed the existing 100,000 BTU input was oversized for the tight, well-insulated second floor. We quoted a properly sized 80,000 BTU combination and had heat restored the same day. The homeowner told us afterward that two other companies had quoted a straight replacement without ever measuring the house.
That’s the difference. We don’t guess at sizing, and we don’t copy the old nameplate because it’s easier. We measure, calculate, and quote what the house actually needs. In Columbus, where January nights regularly dip below 20 degrees, that discipline translates to lower gas bills and equipment that lasts longer.
Call Dalton Heating & Air for Furnace Repair in Columbus
If your furnace is down or making noise it shouldn’t, call (361) 306-9515. You’ll get a live person, a real dispatch window, and a written price before any work begins. Marco Benitez and the whole Dalton Heating & Air team stand behind every furnace and boiler repair in Columbus with a full-year written guarantee. If the repair fails in that time, we come back at no charge. No fine print, no runaround. That’s how we’ve done it since 2003.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Columbus with written-price furnace and boiler repair since 2003.