Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Hilliard
Most furnace repairs in Hilliard run $150 – $700 depending on the faulty part, and a no-heat call in January is something we treat as urgent. Our crews serve Hilliard daily, usually arriving within the same window we give you on the phone. If your furnace has quit on a cold night, call (361) 306-9515 and a live person answers, 24/7, no voicemail queue. We work on Trane, Lennox, Goodman, and Rheem, and every job carries a written price before any tool comes off the truck.
Hilliard’s housing stock swings from mid-century ranches near the old village core to newer construction in Britton Farms and Heritage Preserve. That means furnace age, duct design, and correct sizing shift block by block. A furnace repair that fixes one house on Cemetery Road may be the wrong call for a 1990s build off Scioto Darby Creek Road. Our techs know those differences because we work them every week.
Why Dalton Heating & Air Is Hilliard’s Preferred Furnace Repair Company
Dalton Heating & Air operates under The Garrison Standard, the code that’s governed our work since 2003. For a Hilliard homeowner, that translates to something concrete: we arrive inside the stated window, put the price in writing before starting, do the job by the book, and leave the site clean. If the repair fails within a full year, we return at no charge under the 365-Day Done Right Promise. That’s not a 30-day window. It’s a written year of coverage on every repair, in every Hilliard neighborhood.
Marco Benitez leads the team, and he holds every tech to The Garrison Code on each call. Background-checked, uniformed technicians show up with factory training on nine major HVAC brands. You know who is coming before they arrive. Hilliard homeowners call us after being burned by no-shows or price changes at the door. Our answer is boring and predictable: the quoted price is the price, and the repair is guaranteed in writing.
We also keep a local parts inventory for common Hilliard failures: ignitors for Carrier and Trane furnaces, blower motors that fit older Rheem and Goodman units, and gas valves for Lennox systems. That shortens turnaround when your furnace dies mid-February and you do not want to wait three days on a part.
Boiler Repair in Hilliard
Boiler Repair in Hilliard usually involves a circulator pump that’s failed, a zone valve stuck shut, or an expansion tank that’s waterlogged. Older homes near the Hilliard village core, especially those off Main Street and Cemetery Road, still run hydronic systems instead of forced-air furnaces, and those systems need a tech who understands pressure, not just flame. Boiler repair in Hilliard runs $150 – $700 for most jobs, and a cracked heat exchanger or failed circulator typically lands at the higher end. Call (361) 306-9515 for a written quote before any work starts.
Circulator Pump and Zone Valve Failures
A boiler that fires but won’t push heat to the bedrooms usually has a dead circulator pump or a zone valve that won’t open. We diagnose the difference with a meter, not guesswork. If the pump is seized, we replace it, bleed the air, and confirm flow at every zone before we leave.
Expansion Tank and Pressure Issues
A waterlogged expansion tank drives boiler pressure up until the relief valve drips. Hilliard’s hard water accelerates the problem because sediment settles in the tank bladder. We check tank pressure on every boiler call and swap the tank when it’s failed, which costs less than replacing a boiler that’s been over-cycling from pressure swings.
Gas Furnace Repair in Hilliard
Gas Furnace Repair in Hilliard most often means a flame sensor fouled with carbon, a capacitor that’s gone weak, or a hot surface ignitor that cracked. These are the intermittent no-heat failures we see when the first hard freeze settles over Franklin County and every furnace in Hilliard fires up at once. Gas furnace repair in Hilliard runs $150 – $700; an ignitor or flame sensor is on the low end, a gas valve or blower motor on the high end. The price is in writing before we start, no exceptions.
Ignitor and Flame Sensor Replacement
If your furnace clicks but won’t light, or lights and then drops out after a minute, you’re likely looking at a dirty flame sensor or a cracked ignitor. The sensor can often be cleaned; the ignitor we replace. Both are fast fixes we do same-day for Hilliard calls.
Gas Valve and Blower Motor Repairs
A gas valve that won’t open means no heat at all, and it’s not the kind of repair to put off. Neither is a blower motor that’s overheating from a restricted return. When we replace these components, we include a static pressure check so the new part does not fail the same way the old one did.
Trusted Brands We Service in Hilliard
Our techs are factory-trained on Trane, Lennox, Goodman, and Rheem, among others, and we keep common replacement parts for those brands stocked for Hilliard calls. A Trane ignitor off Scioto Darby or a Goodman blower motor in a Heritage Preserve two-story, we can usually have it fixed the same day without ordering parts. That matters when your furnace is out and the temperature is dropping. For the full list, see our Furnace Repair service page.
Common Furnace Repair Problems We See in Hilliard Homes
- Undersized return ducts in older ranches. Homes built in the 1960s and 70s near the old village core often have one small return for the entire house. That drives high static pressure, which overheats the blower motor and kills it early. We check static pressure on every Hilliard repair call for this reason.
- Cracked heat exchangers in 15-plus-year-old furnaces. Older Hilliard neighborhoods have equipment that predates modern venting standards. A cracked heat exchanger is a carbon monoxide risk and is not repairable. When we find one, we red-tag the unit and show you the crack with a camera.
- Weak capacitors and dirty flame sensors. A furnace that hasn’t had a tune-up in a few years will trip its limit switch or fail to light when temperatures drop. These are cheap parts, usually under $200, but they stop a furnace cold. A maintenance visit catches them before a no-heat night.
- Short-cycling from an oversized unit. Newer Hilliard construction sometimes has furnaces installed without a proper load calculation, often defaulting to the size of whatever came out. An oversized furnace short-cycles, which wastes fuel and wears out parts. The fix is not always a repair; sometimes it’s a right-sized replacement with a written quote.
Pricing for Furnace Repair in Hilliard, OH
Here’s what we charge in Hilliard. The repair range is $150 – $700, and the spread comes down to the part and the labor to reach it. A flame sensor cleaning or capacitor swap lands near $150 – $250. A hot surface ignitor runs $200 – $400. A blower motor, gas valve, or circuit board is $400 – $700. We write the exact number down before we touch anything, and it does not change at the door. Tune-ups run $80 – $200, and they’re flat-rate. Estimates are free, and the number is (361) 306-9515.
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
We Also Serve Cities Near Hilliard
Beyond Hilliard, our techs cover Dublin, Columbus, Powell, and Grove City on the same schedule and under the same written guarantee. If you’re just outside the Hilliard line, call (361) 306-9515 and we’ll confirm your address. You can also read more about our work in the area on the Furnace Repair in Hilliard page.
Serving Hilliard, OH - Our Local Coverage Area
We’re based in the Hilliard area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Hilliard
At 18 years old, a $600 repair is a judgment call, and the honest answer depends on the heat exchanger. If the exchanger is cracked, you replace the furnace; that’s a safety issue, not a financial one. If the exchanger is sound, a $600 blower motor or gas valve may buy you a few more seasons, but you’re spending money on a unit that’s near the end of its typical life. We show you the condition with a camera and give you written pricing for both options so you decide with numbers, not pressure. Call (361) 306-9515 and we’ll walk you through the repair-versus-replace math for your specific furnace.
Most furnace repairs in Hilliard run $150 – $700. A flame sensor or capacitor is on the low end, an ignitor or pressure switch in the middle, and a blower motor, gas valve, or control board at the top. The written quote is free, and the price we put in writing before starting is the price you pay. Call (361) 306-9515 for a specific number on your symptom.
A load calculation is a room-by-room measurement of your home’s heating and cooling demand, based on square footage, window area, insulation, and orientation. In Hilliard, it matters because a mid-century ranch near the village core and a new two-story in Britton Farms have completely different loads. Installing without one is how oversized furnaces end up short-cycling and undersized ones never keep up. We run a Manual J load calculation on every replacement we quote, and it’s included in the free estimate.
Short-cycling in Hilliard usually traces to an oversized furnace, a restricted return duct, or a failing limit switch. An oversized unit heats the house too fast and shuts off before the cycle completes, which wastes fuel and wears down the ignitor and blower motor. A restricted return, which we see often in older ranches, trips the high-limit safety and shuts the burners off mid-cycle. Either way, we diagnose it with a static pressure test, not a guess. Call (361) 306-9515 and we’ll find the actual cause.
SEER2 is the updated efficiency rating for cooling equipment, and for a new AC or heat pump in Hilliard, a SEER2 of 15 to 17 is the practical sweet spot for most homes. Higher ratings cost more up front and save more over time, but the real efficiency gain in Hilliard’s climate often comes from proper sizing and duct correction, not just a bigger SEER2 number. On the furnace side, look for 96% AFUE or better. We’ll show you the operating-cost math for your house before you buy.
Get a Written Quote for Furnace Repair in Hilliard
If your furnace is acting up in Hilliard, don’t nurse it through another cold night. Call (361) 306-9515, describe the symptom, and we’ll give you a straight answer: what’s likely wrong, what it costs, and when we can be there. The price will be in writing before the work starts, guaranteed for a full year, and covered by the 365-Day Done Right Promise. That’s The Garrison Standard, and it’s how we’ve run since 2003.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Hilliard under The Garrison Standard since 2003.