Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Beverly
Furnace repair in Beverly, MA typically costs $150 – $700 depending on the part that failed, and most no-heat calls can be diagnosed and fixed the same day we arrive. We run service throughout Beverly, from Ryal Side to Beverly Farms, with crews dispatched directly to your door. If your heat is out or your furnace is making noise it shouldn’t, call (361) 306-9515 and a live person answers, 24/7.
We know Beverly’s housing stock because we work on it every week. Salt air near the coast, basements that stay damp year-round, and homes built anywhere from 1790 to 1990 mean furnace problems here don’t always look like the textbook version. That local experience is why our Furnace Repair team carries parts for the systems we actually see in Beverly, not just what a national parts catalog says.
Why Dalton Heating & Air Is Beverly’s Preferred Furnace Repair Company
Dalton Heating & Air operates under The Garrison Standard, a set of rules that has governed how we work since 2003. The price is in writing before any work starts. Every repair carries a written guarantee for a full year. If the repair fails in that time, we return at no charge. Those aren’t upgrades or add-ons. They’re the baseline for every call, including yours in Beverly.
Homeowners in Beverly call us because they’ve been through the other kind of experience: a tech who doesn’t show, a quote that changes at the door, a repair that fails a month later with nobody answering the phone. We’re a Garrison Partners location, which means background-checked, uniformed technicians arrive inside the stated window, diagnose the problem, and hand you the price in writing before turning a wrench. Marco Benitez runs our operation, and the standard he enforces is simple: do the job by the book, leave the site clean, stand behind the work.
When you call from Beverly, you’re talking to a live person, not a voicemail queue. That matters at 2 a.m. on a January night when the house is at 54 degrees and dropping.
Heating Repair in Beverly
Heating Repair in Beverly covers the work of getting a furnace that has stopped heating, or is heating poorly, back to reliable operation. Most calls we run in Beverly fall into a few categories: no heat at all, the furnace turning on and off too often, strange banging or rattling from the cabinet, or a pilot that won’t stay lit. The repair itself might be a failed ignitor, a worn blower motor, a bad gas valve, or a cracked heat exchanger. Each of those has a different cost, and the range for furnace repair in Beverly is $150 – $700.
Ignitor and Flame Sensor Work
Modern furnaces with electronic ignition fail most often at the ignitor or flame sensor. The ignitor glows to light the gas; when it cracks or burns out, the furnace can’t start. The flame sensor confirms the burners actually ignited. A dirty sensor tells the board the flame isn’t there and shuts the gas off. Both repairs are common in Beverly and typically run at the lower end of the $150 – $700 range.
Blower Motor Repair
If your furnace lights but blows cold or weak air, the blower motor is a prime suspect. Capacitors fail first, often in damp basements near the water. A full motor replacement costs more, and on older Beverly systems it’s sometimes the moment to talk repair-versus-replace honestly. We’ll give you the number and let you decide.
Boiler Repair in Beverly
Boiler Repair in Beverly is a different animal from furnace work, and we see plenty of both. Boilers heat water instead of air, then circulate it through baseboards or radiators. Many of Beverly’s older colonials and capes still run on hydronic heat, especially homes built before forced air became standard in the 1960s and 70s. Boiler problems show up as no heat, banging pipes, leaking around the unit, or a pressure gauge that won’t hold steady.
Circulator Pumps and Zone Valves
A boiler that fires but doesn’t move hot water usually has a failed circulator pump or a stuck zone valve. In Beverly, where many homes have two or three heating zones, a single bad valve can leave one floor cold while the rest of the house is fine. Diagnosing which component failed is straightforward for a trained tech, and the repair typically stays within the $150 – $700 range.
Expansion Tanks and Pressure Issues
Older Beverly boilers often have waterlogged expansion tanks. When the tank fails, pressure spikes and the relief valve drips or discharges. That’s a fixable issue, but ignoring it shortens the boiler’s life. We check tank pressure on every boiler call, not just when the homeowner reports a leak.
Trusted Brands We Service in Beverly
We’re factory-trained on nine major residential HVAC brands, and in Beverly the ones we see most are Goodman, Rheem, and York. We keep common parts for those systems on the truck, which means faster turnaround when your heat is out and you don’t want to wait on a parts house delivery. Whether you’ve got a Daikin heat pump or a Rheem forced-air furnace, the repair process is the same: diagnose, price in writing, fix it right, stand behind it for a year.
Common Furnace Repair Problems We See in Beverly Homes
- Oversized furnaces short-cycling in older, leaky homes. Many Beverly houses got oversized units installed decades ago. The furnace heats the space too fast, shuts off, and repeats, stressing the heat exchanger until it cracks.
- Ignored blower motor capacitors in damp coastal basements. Homes near the water in Beverly Farms and Prides Crossing have higher basement humidity. That moisture shortens capacitor life, and a failed capacitor means a no-heat call in the middle of winter.
- Ductwork with high static pressure in renovated capes. Beverly capes that got additions or finished attics often have undersized or kinked duct runs. The furnace works harder to push air, runs longer, and burns more fuel than a correctly sized system would.
- Cracked heat exchangers in 15-to-20-year-old units. A furnace in Beverly that’s been short-cycling for years eventually splits its heat exchanger. That’s a safety issue and usually the moment an honest tech talks replacement, not another patch job.
Pricing for Furnace Repair in Beverly, MA
Most furnace repairs in Beverly run $150 – $700, and the spread comes down to which part failed. Here’s how it typically breaks down:
| Service | Typical Range in Beverly |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
An ignitor or flame sensor replacement lands at the lower end. A gas valve or blower motor runs higher. A cracked heat exchanger usually means replacement, and on a 15-year-old furnace that’s often the smarter call. We give you a written price before any work starts, and that price does not change. Call (361) 306-9515 and we’ll schedule a diagnostic, then give you exact numbers for your specific system.
We Also Serve Cities Near Beverly
Our Furnace Repair in Beverly coverage extends to the surrounding North Shore, including Salem, Danvers, Marblehead, and Peabody. If you’re just outside city limits, we can still get a tech to you quickly. Call and we’ll confirm your address is in our service area.
Serving Beverly, MA - Our Local Coverage Area
We’re based in the Beverly area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Beverly
Repair is usually the right call if the furnace is under 12 years old and the repair is under $500. At 15 years old with a $600 repair, replacement starts making more sense, especially if the unit has needed multiple repairs in the last two years. We’ll give you the repair price in writing, then a replacement price if you want it, and you decide.
Yes, we run a Manual J load calculation on every replacement we quote. That matters in Beverly because housing stock varies widely: a 1790s colonial near the waterfront loses heat differently than a 1960s cape off Cabot Street. Often, the calc shows the old unit was oversized, and the right replacement is smaller and more efficient. Call (361) 306-9515 to schedule a load calculation.
SEER2 is the updated efficiency rating for cooling equipment, so it matters for heat pumps and AC, not furnaces specifically. For furnaces, the relevant rating is AFUE. The practical version: a higher AFUE furnace burns less gas for the same heat, which shows up directly on your National Grid bill through a Beverly winter.
We prioritize no-heat calls and typically get a tech to Beverly homes the same day, with emergency response available 24/7. When you call, a live person answers and schedules the dispatch. No voicemail queue, no callback window.
We service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. In Beverly we see mostly Goodman, Rheem, and York, and we keep common parts for those on the truck.
If your furnace is acting up in Beverly, don’t wait for a cold night to make it worse. Call (361) 306-9515 for a free estimate and a straight answer. Marco Benitez and the Dalton Heating & Air crew will show up inside the window, put the price in writing, and stand behind the repair for a full year.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Beverly and the North Shore.