Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Temple City, CA
Temple City sits right where the San Gabriel Valley starts baking in July, and the housing stock here – a lot of it built between the 1940s and 1970s – was not designed for the heat waves we get now. Most homes run original ductwork paired with newer condenser units, which creates a specific set of repair and replacement challenges. We’re Dalton Heating & Air, and we work on all of it. If your system is acting up, call (361) 306-9515 and a real person answers, day or night.
Why Temple City Homes Are Different
Temple City’s older homes are the defining feature of the work here. Many were built with slab foundations and tight attic access, which means duct routing and air-handler placement often require more planning than a newer track home would. We regularly find original galvanized ducting in homes near Temple City Boulevard that has rusted through at the seams, leaking conditioned air into the attic. In the neighborhoods around Live Oak Park, homes from the 1950s and 1960s frequently have electrical panels that were sized for window units, not for the 4-ton central systems that got retrofitted in later. That affects everything from breaker sizing to the gauge of wire feeding the condenser.
The other thing that shapes Temple City work: shade. Streets lined with mature camphor and magnolia trees keep some homes cooler, but they also drop debris into condenser coils all year. A unit that never gets a coil cleaning here runs hotter and draws more current than the same unit would in a newer, treeless development. None of this is exotic – it’s just the reality of older, tree-lined neighborhoods, and it changes what we check first on a service call.
Our Main Temple City Services
These are the three jobs Temple City homeowners call us for most. Each has its own page with pricing, what the work involves, and what to expect on the day we show up.
AC Repair in Temple City
When a Temple City home loses cooling in August, the culprit is usually one of three things: a failed capacitor, a refrigerant leak, or a condenser coil choked with tree debris. We diagnose in that order because it saves you money – a $20 capacitor is a very different repair than a $400 evaporator coil. Our techs carry common capacitors, contactors, and fan motors on the truck, so most calls are finished in one visit. The full breakdown, including what a repair costs here, is on the AC Repair in Temple City page.
Heat Pump Installation in Temple City
More Temple City homes are moving to heat pumps, partly because they handle both cooling and heating without a separate furnace, and partly because the rebate landscape in Los Angeles County has gotten better. The catch in older homes is electrical capacity – a heat pump needs a dedicated 240V circuit, and some of the panels we see here are already maxed out. We factor that into the fixed price before any work starts, not as a surprise line item after the unit is ordered. Details on sizing, brands, and what a typical install runs are on the Heat Pump Installation in Temple City page.
Furnace Repair in Temple City
Temple City winters are mild, but December and January nights still drop into the low 40s, and a furnace that won’t light makes for a cold morning. The furnaces in these older homes are often original to the house or close to it – 20 to 30 years old, with cracked heat exchangers being the big safety concern we look for on every call. We stock igniters, flame sensors, and gas valves for the common furnace brands in this area, so the typical repair is a same-day job. Read the full pricing and what we check on the Furnace Repair in Temple City page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Temple City
Our technicians are factory-trained on Carrier, Trane, Lennox, Goodman, and Rheem, and we also service York, Daikin, Bryant, and American Standard. We keep common parts for all nine on the trucks, which means less waiting on a parts run. See our brands for the full list and what each one costs to maintain.
Pricing for HVAC Company in Temple City, CA
| Service | Typical range in Temple City |
|---|---|
| AC repair (minor – capacitor, contactor) | $150 – $350 |
| AC repair (major – fan motor, circuit board) | $350 – $650 |
| Furnace repair (minor – igniter, flame sensor) | $150 – $350 |
| Furnace repair (major – gas valve, blower motor) | $350 – $700 |
| AC installation (full system, mid-efficiency) | $3,500 – $5,500 |
| AC installation (high-efficiency, larger home) | $5,500 – $7,500 |
| Annual tune-up / maintenance visit | $80 – $200 |
What pushes a Temple City job toward the higher end of those ranges is usually access – tight attics, slab foundations, or an electrical panel that needs a subpanel added for a new system. Whatever the number is, you get it in writing before we start. No price changes at the door, no add-ons after the fact.
Neighborhoods We Serve in Temple City
We work the whole city, from the older blocks north of Las Tunas Drive to the newer construction on the south side. Most Temple City calls get a technician on site within a few hours, and emergency calls are dispatched immediately.
- North Temple City (around Live Oak Park)
- Central Temple City (near Temple City Boulevard and Las Tunas Drive)
- South Temple City (below Lower Azusa Road)
- West Temple City (along Rosemead Boulevard)
- East Temple City (near Baldwin Avenue)
Service Area – Cities Near Temple City
We also take calls from surrounding communities in the San Gabriel Valley, including El Monte, CA, San Gabriel, CA, Arcadia, CA, and Rosemead, CA. Scheduling and dispatch run through our Los Angeles office, and crews are positioned to reach all of these cities quickly.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Temple City
Most Temple City calls are answered the same day, and emergency calls – especially no-cooling situations in the summer – are dispatched immediately. We schedule in windows, not open-ended “sometime between 8 and 5” blocks. You’ll know who is coming and when they’ll arrive.
Yes, most installations and some major repairs in Temple City require a permit through the city’s building department. We handle the permitting paperwork as part of the job. The fee is included in your written price, and the work is inspected by the city before we close out the permit.
Yes. Temple City has a number of HOA-governed neighborhoods, and condensers often have to sit in specific locations or behind screening. We work with the HOA requirements during the estimate phase so the installation passes the first time. If your HOA has a pre-approval process, we’ll put the documents together for you.
If your system needs attention – or you just want a written quote for replacement – call Dalton Heating & Air at (361) 306-9515. Marco Benitez and the team will answer. Free estimates, written pricing, and a guarantee on every repair in writing before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Good communication, tidy, and disciplined work. Taped off the floor and wiped the unit down."
- Karen J."Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B."Tech arrived in uniform right on time. AC wasn't cooling, found a failed capacitor, and replaced it in twenty minutes. The owner is a veteran and the company runs like it."
- Frank O.