Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Melrose, MA
Melrose, MA sits on rocky, uneven terrain north of Boston, and its housing stock runs from 1890s Victorians to 1950s capes and a handful of newer builds. That mix means no two HVAC jobs here are identical. Ductwork gets retrofitted through plaster walls, outdoor units sit on granite ledges, and older homes rarely had central air designed in from the start. Dalton Heating & Air handles all of it with written pricing before work begins and a full-year guarantee on every repair. Call (361) 306-9515 for a straight answer on what your system needs.
Why Melrose Homes Are Different
Most Melrose homes were built before central air conditioning existed, which changes how we approach almost every job. In the Highlands and around Wyoming Hill, we regularly work on balloon-framed houses with no return ducting on upper floors. In the lower streets near Main Street and around Melrose Highlands station, we see a lot of forced-hot-water systems paired with window units that homeowners are finally replacing with heat pumps or central air. The soil here is shallow over ledge in spots, so outdoor condenser placement often means a pad on granite rather than a simple pour. Winter temperatures drop low enough that a furnace that is limping along in October will fail outright by January, so we tell Melrose homeowners to test heat before the first real cold snap. Permits are handled through the city, and we know what the inspectors here look for.
What ties it together is age. A Melrose house built in 1920 was framed for radiators and gravity heat, not for 16-inch supply trunks. When we install a heat pump or add central air, the job usually includes reworking a chase or building a soffit, and that work has to look right in a house with original trim. This is not the kind of install you want a crew learning on. Marco Benitez, who runs Dalton Heating & Air, makes sure every Melrose job gets a written scope before we start cutting.
Our Main Melrose Services
The two calls we get most in Melrose are cooling systems that quit in July and furnaces that never made it through a cold snap. Here is how each one works in this city.
AC Repair in Melrose
Central air in Melrose is often a retrofit, which means the equipment gets squeezed into closets, attics, and side yards with less clearance than a new-construction install. Common failures we fix here include failed capacitors, low refrigerant, clogged condensate lines, and compressors that overheat because the unit cannot breathe. Before any repair, we put the price in writing. If the repair fails within a year, we come back at no charge. Read the full breakdown at AC Repair in Melrose.
Heat Pump Installation in Melrose
Heat pumps are the fastest-growing install in Melrose because they cool and heat in one unit, and they work well in the shoulder seasons when a boiler is overkill. The challenge here is placement: many Melrose lots are narrow, and outdoor units need clearance from property lines and windows. We size the system to the house, not to a rule of thumb, and we run the electrical and line-set work to code the first time. See Heat Pump Installation in Melrose for pricing, sizing, and brand options.
Furnace Repair in Melrose
Melrose winters will find a weak furnace. We get calls from the Highlands to the Oak Grove side for ignitors that stopped sparking, limit switches tripping, blower motors failing, and heat exchangers that cracked after years of uneven airflow. We carry parts for Goodman, Rheem, York, Daikin, and others, so most repairs are same-trip. Every furnace repair comes with a written one-year guarantee. The full breakdown is at Furnace Repair in Melrose.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Melrose
We service and repair Goodman, Rheem, York, and Daikin equipment regularly in Melrose, and our parts stock covers these plus the other major residential brands. That means fewer two-trip repairs. For the full list, see our brands.
Pricing for HVAC Company in Melrose, MA
These are the price ranges we quote for typical Melrose jobs. The exact number depends on your system, the part, and access, but the figure below reflects what most homeowners in this city actually pay.
| Service | Typical range in Melrose |
|---|---|
| AC repair | $150 – $650 |
| Furnace repair | $150 – $700 |
| AC installation | $3,500 – $7,500 |
| Tune-up | $80 – $200 |
What pushes a Melrose job toward the high end is usually access: a furnace in a crawlspace, an outdoor unit wedged against a retaining wall, or ductwork that needs custom fabrication to fit an older frame. None of that changes our rule: the price goes in writing before any work starts, and it does not move after you approve it.
Neighborhoods We Serve in Melrose
We work across the whole city, from the streets around Wyoming Hill down to the flats near the Malden line. Our typical response for a repair call in Melrose is same-day when you call before noon, and next morning after that.
- Melrose Highlands
- Wyoming Hill
- Downtown Melrose
- Oak Grove area
- Mount Hood
Service Area – Cities Near Melrose
We also serve the surrounding towns for HVAC repair and installation. Homeowners in Malden, MA, Stoneham, MA, Saugus, MA, and Wakefield, MA get the same written pricing and one-year repair guarantee we give in Melrose.
Serving Melrose, MA - Our Local Coverage Area
We’re based in the Melrose area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Melrose
Same-day for most calls placed before noon, and next morning after that. We answer the phone with a live person 24/7, so you get a real window, not a callback sometime later. Melrose is a compact city, and our crews are already working the area most days.
Most replacement and installation work does require a permit through the city, and we handle the filing as part of the job. Repair work generally does not. We will tell you exactly what your project needs before we start, and the permit status never affects the written price.
Yes. Most of the houses here are old enough that we plan every cut around the existing framing and finishes. We open what has to be opened, we cover floors and furnishings, and we patch and clean before we leave. The Garrison Code says leave the site clean, and we mean it.
If your furnace is making noise it did not make last week, or your AC is blowing warm, call Dalton Heating & Air at (361) 306-9515. We will give you a straight answer, a set price, and a crew that shows up when we say we will.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Melrose Customers Say
"Coil cleaning and a refrigerant check before summer. AC has never been this cold."
- Marty D."Good communication, tidy, and disciplined work. Taped off the floor and wiped the unit down."
- Karen J."Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B.