Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Justin, TX
Dalton Heating & Air is the HVAC company in Justin, TX that homeowners call when they want the price in writing before work starts and a guarantee that actually means something. Justin sits north of Fort Worth, where summers push AC systems hard and winter nights still demand a furnace that fires reliably. Whether you need AC repair, heat pump installation, or furnace repair in Justin, you’ll deal with one crew that shows up on time and stands behind the work for a full year. Call (361) 306-9515 and you’ll get a live person, not a voicemail queue.
Why Justin Homes Are Different
Justin’s housing stock runs from established ranch-style homes on larger lots to newer construction in subdivisions like Fincher Farms and The Preserve at Justin. That mix changes the work. Older systems in 1970s and 1980s homes often run R-22 refrigerant, which is being phased out, so repairs require retrofits or full replacement planning. Newer homes in Justin tend to have builder-grade equipment that was installed fast and needs correction: undersized returns, kinked duct runs, and condensate drainage that was never sloped right.
Justin’s climate also splits the year. The summer heat index above 100°F is a genuine health risk for homes without working AC, especially for older residents. Winter cold snaps into the 20s and 30s mean a furnace failure is not just uncomfortable, it can freeze pipes. That’s why our dispatch schedules Justin jobs with local drive time in mind, not a generic metro radius. We plan repairs and installations around the actual layout of FM 156, Justin Road, and the neighborhoods off Cleveland-Gibbs Road, so our technicians arrive when they say they will.
Our Main Justin Services
Justin homeowners call us most often for AC repair when the system stops cooling in July, and furnace repair when the first cold front hits in November or December. Heat pump installation is also on the rise in Justin, where homeowners want one system that handles both heating and cooling and drops their utility load.
AC Repair in Justin
AC repair in Justin starts with a real diagnosis, not a guess. Our technicians test refrigerant charge, airflow across the evaporator coil, capacitor health, and compressor amp draw before quoting anything. Most AC repairs in Justin run $150 to $650 depending on the part, and every repair includes a written estimate before we touch the unit. The price you see is the price you pay. We also service all major brands, so if your Trane or Lennox condenser is short-cycling on a 100-degree afternoon, call us. Learn more on our AC Repair in Justin page.
Heat Pump Installation in Justin
Heat pump installation in Justin makes sense for homes without gas lines or for owners who want efficient electric heating and cooling in one unit. The installation starts with a load calculation, not a guess at sizing, because Justin’s hot summers and cold snaps punish a wrong-sized system. We handle the full job: removal of the old unit, pad and disconnect work, line set, and final charge. Heat pump installations in Justin range from $3,500 to $7,500 and include a written price before any work starts. See the details on our Heat Pump Installation in Justin page.
Furnace Repair in Justin
Furnace repair in Justin usually comes down to a failed ignitor, a dirty flame sensor, or a blower motor that has worn out after years of pushing air through Texas dust. Most furnace repairs in Justin run $150 to $700, and the part you need is often on the truck. We keep common furnace parts stocked for Goodman, Rheem, and other major brands, which means less waiting and no second scheduled visit for a simple component. If your furnace is short-cycling or the burners won’t stay lit, the repair starts with a written estimate. Get the full details on our Furnace Repair in Justin page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Justin
Our technicians are factory-trained to work on nine major HVAC brands, including Trane, Lennox, Goodman, and Rheem. We keep common replacement parts stocked in our service vans so repairs over at your home happen on the first visit. Check out our brands to see the full list.
Pricing for HVAC Company in Justin, TX
Here’s what Justin homeowners can expect to pay for the most common jobs. These are the same ranges we quote over the phone, and the written estimate you get before work starts will land inside them.
| Service | Typical range in Justin |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
What pushes a repair toward the top end in Justin is usually a failed compressor or a coil leak that has gone unnoticed through a Texas summer. What keeps a price lower is catching problems early with a tune-up, which runs $80 to $200 and includes a written report of what we found. Every price you get from Dalton Heating & Air is put in writing before any work starts. No door-step surprises, no pressure.
Neighborhoods We Serve in Justin
Dalton Heating & Air runs service and installation calls across all of Justin, from established streets near Old Town to the newer subdivisions spreading north and east of FM 156. Our technicians are familiar with the lot layouts and utility access in the area, so the job gets done faster. Here are a few of the neighborhoods where we work most often in Justin:
- Fincher Farms
- The Preserve at Justin
- Old Town Justin
- Estates at Justin Ridge
- Woodland Hills
For most neighborhoods in Justin, we can have a technician on-site the same day you call, often within a few hours when the weather is brutal and a cooling system is down.
Service Area – Cities Near Justin
While this page covers Justin specifically, our technicians also serve the surrounding North Tarrant and Denton County communities. If you’re outside the Justin city limits, you can find our local services in Roanoke, TX, Haslet, TX, Argyle, TX, and Keller, TX. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, and crews are out in Justin daily.
Serving Justin, TX - Our Local Coverage Area
We’re based in the Justin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Justin
We answer calls with a live person 24/7, and for most Justin neighborhoods we can have a technician on-site the same day. AC and furnace failures get priority during extreme heat or cold, since a down system is a health and safety issue. Call (361) 306-9515 and we’ll give you a straight answer on the arrival window.
Yes, most HVAC equipment replacements and new installations in Justin require a permit, and the work must be done by a state-licensed contractor. Dalton Heating & Air handles the permit paperwork as part of the installation. You shouldn’t have to chase documents; we submit and close the permit for you.
We do. Whether it’s a heat pump installation to replace a dead compressor or a full furnace change-out, the job starts with a load calculation and a written fixed price. We schedule a set install date, pull the permit, and stand behind the equipment with our full-year guarantee on the workmanship. Call (361) 306-9515 for a free estimate in Justin.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Justin Customers Say
"Changed the filter size and added a better filter rack. Simple and useful advice."
- Rhonda C."Honest, direct people. Told me what the furnace needed and nothing more, and the bill matched."
- Eliza S."Coil cleaning and a refrigerant check before summer. AC has never been this cold."
- Marty D.