Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Westchester
Heat pump installation in Westchester typically runs $3,500 to $7,500 for a full system changeout, depending on the home’s duct condition, the unit’s efficiency rating, and whether the job is a straight swap or a load-calculated changeout with duct repairs. Most Westchester homeowners need a realistic answer about whether their 1970s or 1980s block home can even support the tonnage a salesperson quoted over the phone. The honest answer: not always, and that’s exactly why we send a trained technician to measure before we ever put a price in writing. Call (361) 306-9515 and you’ll talk to a live person, not a voicemail queue. We serve all of Westchester with written pricing and a one-year guarantee on every install.
Why Dalton Heating & Air Is Westchester’s Preferred Heat Pump Installation Company
We’re a Garrison Partners company, operating under The Garrison Standard since 2003. That standard is not a slogan. It means our technicians arrive inside the stated window, put the price in writing before any work starts, do the job by the book, leave the site clean, and stand behind the work for a full year. Every call, without exception.
In Westchester, homeowners call us after they’ve had a crew no-show, or quote one number and hand over a different invoice at the door. We hear it often. The fix is simple: written pricing before we touch the unit. Background-checked, uniformed technicians. A live person answers the phone 24/7. And if a repair fails within the 365-Day Done Right Promise, we come back at no charge.
Marco Benitez leads our installation team. He has walked enough Westchester attics off Coral Way and Bird Road to know that the ductwork, not the heat pump, is often the thing that decides whether the house holds temperature. That local experience changes how we price and plan every job.
Mini Split Installation in Westchester
Mini split installation in Westchester is the right answer for block homes where the existing ductwork is too far gone, or for additions, garages, and converted carports that were never tied into the main system. A ductless mini split gives you zoned cooling and heating without running new duct through a 130°F attic, which is a real advantage in Westchester’s housing stock. Heat Pump Installation comes in many forms, and a mini split is often the cleanest option when the rooms are small and the ductwork is leaking.
Ductless Systems for Block Homes
Westchester homes built in the 1970s and 1980s often have concrete-block walls and undersized, leaking ducts. Running a mini split lets you condition the room you actually use instead of paying to cool the attic. The indoor unit mounts on the wall, the outdoor condenser sits on a pad or bracket, and a small refrigerant line connects them through a three-inch hole.
Garages and Additions
A converted garage off SW 8th Street or a back addition that never got proper ductwork is a strong candidate for a mini split. We size it by the room’s actual heat gain, not a rule of thumb, so you’re not buying more tonnage than the space needs. Typical mini split installs in Westchester fall within the $3,500 to $7,500 range depending on the number of heads and the unit’s SEER2 rating.
Heat Pump Maintenance in Westchester
Heat pump maintenance in Westchester is about catching the small failures before they become a no-cooling call in the middle of August. A tune-up runs $80 to $200 here, and it includes checking the refrigerant charge, testing capacitors and contactors, cleaning the coils, measuring static pressure across the air handler, and inspecting the reversing valve and defrost board. If a repair is needed, most heat pump repairs in Westchester run $150 to $650 depending on the part.
Static Pressure Checks
In a 1970s block home, the duct system is often the weak link. We measure static pressure on every maintenance visit because a heat pump pushing against an undersized or pinched supply trunk runs hotter, cycles more, and dies years early. You’ll get the numbers in writing on your invoice or report.
Refrigerant and Coil Service
Low refrigerant is a leak, not a maintenance item. If your heat pump is low, we find the leak, repair it, and evacuate and recharge the system to manufacturer spec rather than just topping it off. Coil cleaning matters more in Westchester because the outdoor condenser pulls in dust, pollen, and salt-tinged air, and a fouled coil costs you efficiency and compressor life.
Trusted Brands We Service in Westchester
Our technicians are factory-trained to service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Westchester heat pump installs, we commonly recommend Rheem and Daikin for their reliability in hot, humid coastal air, and York and Bryant for homeowners who want strong efficiency numbers at a mid-range price. We don’t push one brand. We match the equipment to the house, the ductwork, and the budget. Parts for all nine brands are stocked locally, which means less waiting on a back-ordered control board when your system is down.
Common Heat Pump Installation Problems We See in Westchester Homes
- Oversized replacement heat pumps. A salesperson squares off the house and sells a 4-ton unit for a home that needs 3 tons. The short cycles drive humidity up and wear the compressor out early. We pull a load calculation before we quote.
- Duct leaks in 1970s and 1980s attics. The ductwork in many Westchester block homes leaks 20% to 30% of the air into the attic. The new heat pump does its job, but the rooms never get the air. We inspect and often seal or resize the trunk before or during the install.
- Changeouts without static pressure testing. A new heat pump paired with a pinched or undersized duct system runs high static pressure, stressing the blower motor and shortening the reversing valve’s life. We measure this on every job.
- Refrigerant charges set by guesswork. If the install crew doesn’t weigh in the charge to match the lineset length, the system runs inefficiently from day one. We charge by manufacturer spec using a micron gauge and digital scale, not a “that feels about right” approach.
Pricing for Heat Pump Installation in Westchester, FL
Here are the numbers we quote Westchester homeowners, in writing, before any work begins:
| Service | Typical Westchester Price |
|---|---|
| Heat pump installation (full system changeout) | $3,500 – $7,500 |
| Heat pump or AC repair | $150 – $650 |
| Tune-up / maintenance visit | $80 – $200 |
What moves the price on a full install is mostly the ductwork. A straight swap on a well-maintained system sits at the lower end. A load-calculated changeout with trunk resealing, a new lineset, and a higher-SEER2 unit lands at the upper end. The estimate is free, and it includes a written breakdown of equipment, labor, and any recommended ductwork. Call (361) 306-9515 for an exact quote.
We Also Serve Cities Near Westchester
Dalton Heating & Air dispatches crews from our South Florida office to Westchester and the surrounding metro. We also serve homeowners in Jacksonville, Miami, Tampa, and Orlando. If you’re outside Heat Pump Installation in Westchester, call and we’ll confirm coverage.
Serving Westchester, FL - Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Westchester
Repair is usually the smarter call if the compressor and reversing valve are sound and the repair bill stays under about a third of the cost of a new system, which in Westchester means under roughly $1,200 to $2,500 depending on tonnage and SEER2. Replacement starts making sense when the unit is more than 12 years old, the compressor has failed, or the system is an R-22 unit that’s been topped off more than once. We’ll give you an honest recommendation with numbers, not a sales script. Call (361) 306-9515 and we’ll send a tech to diagnose it.
It changes the tonnage, and that’s the whole game. A load calculation measures the home’s actual heat gain: block-wall insulation, window area, ceiling height, attic ventilation, and duct condition. Most 1970s Westchester block homes were built with uninsulated concrete-block walls and ducts run through attics that hit 130°F in summer. A square-footage guess often oversizes the unit by half a ton to a full ton. An oversized heat pump short cycles, leaves humidity in the air, and wears out the compressor years early. The load calculation also tells us whether the ducts need resealing before the new unit goes in, because a 3-ton heat pump on a leaking 1978 trunk won’t hold setpoint no matter how high the SEER2 number is.
A full heat pump system changeout in Westchester runs $3,500 to $7,500. The spread comes from ductwork condition, efficiency rating, and whether the job is a straight swap or a load-calculated changeout with trunk sealing and resizing. Repairs run $150 to $650, and a maintenance visit is $80 to $200. Those are written numbers, not phone estimates that shift when the technician arrives. For an exact quote, call (361) 306-9515 and we’ll schedule a free on-site assessment.
SEER2 is the cooling efficiency rating, and in Westchester’s climate it has a direct effect on your FPL bill. A 14.3 SEER2 unit, which is the current minimum, uses roughly 15% to 20% more electricity per cooling season than a 17 SEER2 or 18 SEER2 unit of the same tonnage. But here’s the catch: if your ducts leak 25% of the air into the attic, you’re paying for efficiency that never reaches the rooms. The number that actually matters is measured static pressure across the air handler, because a high-static system burns more watts and cools less. We test both, and we explain what the numbers mean on your actual bill, not a brochure.
Yes. Mini splits are a common answer for Westchester additions, garages, and carport conversions where running new duct is impractical or the existing trunk is already maxed out. We size the unit by the room’s heat gain, install a wall-mounted indoor head, and connect it through a small exterior penetration to the condenser. Pricing falls within the $3,500 to $7,500 range depending on the number of heads and the SEER2 rating. Call (361) 306-9515 for a free estimate.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Westchester under The Garrison Standard since 2003.