Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Travis Ranch
Heat pump installation in Travis Ranch typically costs between $3,500 and $7,500 for a standard split system, and most jobs are scheduled within five to seven business days of the free estimate. If your home sits outside the natural gas footprint and you’re running on propane or straight electric resistance heat, a properly sized cold-climate heat pump is usually the right call. We’re Dalton Heating & Air, led by Marco Benitez. We dispatch from the Dallas-Fort Worth metro office, and our crews work Travis Ranch properties every week, from single-family homes to detached workshops. Call (361) 306-9515 for a free in-home estimate. The price you get is the price you pay, in writing, before any work starts.
Why Dalton Heating & Air Is Travis Ranch’s Preferred Heat Pump Installation Company
Travis Ranch is not a suburb where you can assume natural gas is at the street. That one fact changes how a heat pump should be sized, wired, and set up. We’ve done enough work here to know that a heat pump paired with a propane furnace dual-fuel setup is the practical standard for exposed rural lots, and we quote it that way from day one. Our customers in Travis Ranch tell us the same thing: they want a crew that shows up inside the stated window, puts the price in writing, and leaves the site clean. That’s the Garrison Standard, and our Garrison Partners company has operated under it since 2003.
Every installer who walks onto a Travis Ranch property is background-checked, uniformed, and factory-trained on Lennox, Trane, Rheem, and Goodman equipment. We carry common parts for those brands, so a capacitor or a Schrader valve doesn’t mean a week-long wait. The Garrison Code applies on every job: arrive on time, price in writing before starting, do the work by the book, clean up, and stand behind it for a full year. If our work doesn’t hold, we come back at no charge. That guarantee is written, not implied.
For the full picture on what our Heat Pump Installation team handles across the metro, see our main service page. Here, we’re talking specifically about Travis Ranch and the kinds of properties we see on its rural roads.
Geothermal Heat Pump Installation in Travis Ranch
Geothermal Heat Pump Installation in Travis Ranch is a different animal from a standard air-source split. Instead of pulling heat from outdoor air, a ground-source system uses buried loops to pull steady heat from the earth. On larger, open rural lots around Travis Ranch, where there’s room to run horizontal loops, geothermal becomes a realistic option; on tight in-town lots it often isn’t. The installed cost runs higher than the $3,500 to $7,500 range for a standard split heat pump, and we quote it only after a site survey and a loop-field design. In exchange, you get heating that isn’t thrown off by 12°F mornings or a west wind across open pasture.
Ground Loop Design on Rural Lots
Travis Ranch properties with an acre or more can usually take a horizontal loop field, which is less expensive to dig than vertical bores. We check soil composition and drainage first. Clay-heavy soil holds and transfers heat differently than sandy loam, and that changes loop length. We won’t guess. We size the loop field off a Manual J load calculation and the actual heat loss of the house, not a rule of thumb.
When Geothermal Makes Sense Here
Geothermal earns its keep on Travis Ranch properties where the home is large, the propane bill is already high, and the owners plan to stay for ten years or more. The loop field is a durable underground asset, and the indoor unit is protected from weather. We walk every customer through the payback honestly. If the load is small or the lot can’t take a horizontal field, we tell you so and quote a cold-climate air-source heat pump instead.
Ductless Heat Pump Installation in Travis Ranch
Ductless Heat Pump Installation in Travis Ranch is the answer for detached workshops, garages, add-on rooms, and older homes that never had ducts to begin with. A mini-split uses an outdoor condenser connected to one or more indoor wall-mounted heads, with no ductwork needed. For a shop or outbuilding, that means you’re not running a duct chase across the yard or tearing out drywall. A single-zone ductless install in Travis Ranch usually lands in the $3,500 to $7,500 range depending on capacity and brand; multi-zone jobs run higher. We give you a fixed written price after the load calculation, not before.
Conditioning Detached Shops and Workshops
We see a lot of detached workshops around Travis Ranch, and they’re a common spot for a ductless heat pump. These buildings have real heat loss: exposed walls, concrete slab floors, and no wind shelter. A single head sized for the square footage will fall short if the building has a roll-up door or a 14-foot ceiling. We measure the actual envelope, not just the floor plan, and size the unit for the building’s heat loss at our area’s design temperature. That prevents a unit that runs constantly in January and still can’t hold temperature.
Equipment Choice for Dusty Environments
A wood shop or a welding bay is a hostile place for an indoor coil. We recommend units with washable, anti-dust filters and we talk through placement so the head isn’t pointed at a workbench where sawdust blows straight into the fins. The outdoor condenser should sit off the ground on a stand and away from prevailing wind. These are small decisions that change how often the unit needs service.
Trusted Brands We Service in Travis Ranch
We install and service Trane, Lennox, Rheem, and Goodman heat pumps, and we stock common repair parts for those brands so Travis Ranch customers don’t wait on a parts truck from the other side of the metro. If you already own one of these systems or one of the other five major residential brands we’re factory-trained on, we can service it. The brand matters less than the install. A Goodman installed with a proper load calculation and a correctly set dual-fuel board will outlast a premium Lennox thrown in by the cheapest bidder. We’d rather walk a job than install the wrong unit. Call (361) 306-9515 and we’ll tell you what your property actually needs.
Common Heat Pump Installation Problems We See in Travis Ranch Homes
- Undersized or oversized equipment on exposed lots. When a heat pump is sized without a real Manual J load calculation, it either runs constantly or short-cycles. On wind-whipped Travis Ranch properties with no tree shelter, the wrong size drives up bills and wears out compressors early.
- Propane backup miswired or missing. This is the big one. Where natural gas isn’t available, a dual-fuel heat pump with a propane furnace needs the fossil-fuel kit wired correctly and the changeover temperature set deliberately. We’ve fixed installs where the heat pump locked out in freezing weather because a thermostat never told it to switch to propane.
- Duct runs to outbuildings not accounted for. Detached shops need properly sized duct runs or a separate zone. Undersized flex duct to a workshop creates high static pressure that starves the heat pump and the shop at the same time.
- Attic duct chases on slab-on-grade rural lots. Many Travis Ranch homes sit on slabs, so warm air has to travel through an attic that gets brutal in August. If the attic duct isn’t sized and sealed right, a new heat pump loses a huge share of its output before it reaches a register. We spec duct boot-to-boot, not unit-to-plenum.
Pricing for Heat Pump Installation in Travis Ranch, TX
| Job | Typical Travis Ranch Price Range |
|---|---|
| Standard split-system heat pump install | $3,500 – $7,500 |
| Dual-fuel heat pump with propane furnace backup | $5,000 – $7,500 |
| Ductless mini-split, single zone | $3,500 – $5,500 |
| Ductless mini-split, multi-zone (2 – 3 heads) | $6,000 – $9,500+ |
| Heat pump tune-up (seasonal) | $80 – $200 |
A standard heat pump installation in Travis Ranch runs $3,500 to $7,500. Dual-fuel setups, where the heat pump is paired with a propane furnace as the auxiliary source, land at the upper end of that range and sometimes above it. The variables are the size of the house, the condition of the ductwork, and whether we’re adding a fossil-fuel kit to the propane furnace you already have. We don’t quote a number over the phone and then pad it at the door. Marco Benitez and our team give you a written price after a site visit and a load calculation. That price is the price: no same-day add-ons, no “we found more damage” surprise. The estimate is free. Call (361) 306-9515.
We Also Serve Cities Near Travis Ranch
If you have a property in Travis Ranch but also manage rental or family homes elsewhere, we run crews into the surrounding metro. We serve Houston, San Antonio, Dallas, and Fort Worth with the same written-price, written-guarantee terms. The drive time changes; the standard doesn’t. If you’re outside Travis Ranch proper, tell us on the phone and we’ll confirm the closest dispatch window.
Serving Travis Ranch, TX - Our Local Coverage Area
We’re based in the Travis Ranch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Travis Ranch
Yes, and it’s the setup we recommend most often here: a cold-climate air-source heat pump paired with a propane furnace as the dual-fuel backup. The heat pump does the heavy lifting in mild weather, and the propane furnace takes over when outdoor temperatures drop below the changeover point, usually set around 35°F. Because most Travis Ranch homes outside the natural gas footprint already have a propane tank and furnace, this setup avoids installing a whole new fuel system. The key is that the heat pump has to be sized for the home’s actual heat loss on an exposed lot. Call (361) 306-9515 and we’ll do the load calculation at no charge.
Yes. A ductless heat pump is usually the cleanest way to condition a detached workshop in Travis Ranch, because there’s no ductwork to run across the yard. We size the unit for the building’s ceilings, slab, roll-up doors, and wind exposure, then install a wall head or a ceiling cassette. In some cases, a small split system with a short duct run works better, especially if you want to condition two rooms. We’ll give you a fixed price for either option. Call (361) 306-9515 and we’ll come look at the building.
SEER2 is the current federal efficiency rating for cooling, and it measures how much cooling a heat pump delivers per watt of electricity under more realistic test conditions than the old SEER number. Air-source heat pumps sold today have to meet a minimum SEER2 based on the region, and here in Texas the minimums are higher than in northern states. A higher SEER2 number means lower summer cooling bills, which matters on Travis Ranch properties where the AC side of the heat pump runs hard from May through September. Heating efficiency is rated separately, and we look at both numbers when we quote a unit. Call (361) 306-9515 and we’ll explain the rating on any unit you’re considering.
We charge a heat pump by weighing in the manufacturer’s specified charge, not by “adding a little and watching the gauge.” That method matters on Travis Ranch properties, where we install in cold months and a heat pump can present a false low gauge reading on a short, cold day. We also check for leaks at the Schrader valves and the service ports before we ever add refrigerant. On a heat pump, the charge has to serve both heating and cooling, so we verify subcooling in the cooling mode when weather allows and use the manufacturer’s charging chart in the heating mode. If the charge is wrong, the unit’s efficiency drops and the compressor runs hotter than it should. Call (361) 306-9515 if your system is icing up or running long cycles.
Yes. We’re factory-trained to service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If you already have a Goodman heat pump on the house, a Rheem unit in the shop, and a Lennox air handler in a guest suite, one truck handles all of it. We stock common parts for Trane, Lennox, Rheem, and Goodman on the vehicle, so most repairs don’t need a second trip. Write it up, fix it, hand you a written one-year guarantee. Call (361) 306-9515.
Travis Ranch sits in a part of Texas that gets both triple-digit summer days and winter nights that can drop into the teens. A heat pump has to cool against a hot attic in August and still extract heat from cold outdoor air in January. That’s why we run a full Manual J load calculation on every install, not a square-footage rule of thumb. Wind exposure and the lack of tree shelter on exposed rural lots also increase heat loss, and the calculation accounts for that. A unit sized only for cooling will fall short on the coldest nights and force the propane backup to run constantly, which is exactly what a dual-fuel system is supposed to prevent. Call (361) 306-9515 and we’ll size it for your actual house, not an average one.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Travis Ranch with heat pump installation and repair under The Garrison Standard since 2003.