Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Silverdale
Heat pump installation in Silverdale, WA typically runs $3,500 – $7,500 for a complete system, depending on the size of your home and the equipment you choose. Most Silverdale homeowners replacing a failed heat pump get a new unit installed within one to two weeks of the written estimate. If yours has quit, call (361) 306-9515 and a live person answers, day or night. We serve the Kitsap Peninsula with factory-trained crews and written pricing before any work begins, so the number on the proposal is the number you pay.
We know Silverdale’s housing stock, from the 1970s split-levels off Ridgetop Boulevard to newer construction near the Clear Creek Trail corridor. A heat pump here does double duty through wet winters and mild summers, and sizing it correctly is what keeps your electric bill from spiking every January. Our Heat Pump Installation team handles the load calculation, the duct assessment, and the permit paperwork so you don’t have to chase any of it.
Why Dalton Heating & Air Is Silverdale’s Preferred Heat Pump Installation Company
We have earned our reputation in Silverdale by treating every job as a full-year commitment, not a one-day sale. The Garrison Standard, which has governed every Dalton job since 2003, means three things on your installation: the price is written before any work starts, the crew arrives inside the stated window, and the finished system is backed by a 365-Day Done Right Promise. If something about the install is not right, we make it right, on our time.
Marco Benitez, who leads our team, holds every technician to The Garrison Code: show up on time, put the price in writing, do the job by the book, leave the site clean, and stand behind the work for a full year. Homeowners in Silverdale have heard plenty of promises from other companies. We put ours in writing on every single job, including a written guarantee on every repair and a free second visit if the repair fails within the guarantee period.
Our Heat Pump Installation in Silverdale crew is background-checked and uniformed, so you know exactly who is walking up to your door. We answer calls with a live person 24/7, not a voicemail queue. And we do not charge overtime for evenings or weekends, even when a heat pump fails during a cold snap on the Kitsap Peninsula.
Heat Pump Service in Silverdale
Heat Pump Service for Silverdale homeowners means diagnosing why your system is not producing heat or cooling, and fixing it with a written repair price before any work begins. Most heat pump repair jobs in Silverdale run $150 – $650, depending on the failed component. A capacitor replacement sits toward the low end; a failed compressor or reversing valve repair lands higher. Either way, you see the number in writing first.
Silverdale’s damp winters put a particular strain on heat pump defrost boards and outdoor sensors. When a system cycles into defrost mode every 20 minutes and the outdoor coil is not actually iced over, that is usually a failed sensor, not a condemned system. Our technicians diagnose the actual fault, not the age of the unit.
Scheduled Maintenance and Tune-Up
A seasonal tune-up in Silverdale runs $80 – $200 and includes a full inspection of the compressor, refrigerant charge, defrost controls, and electrical connections. We check static pressure and airflow so a minor restriction does not become a dead compressor next winter. The report is written, photo-documented, and given to you at the end of the visit.
Same-Week Repair Visits
Most Silverdale heat pump service calls can be scheduled within the same week, and no-cooling calls in the summer or no-heat calls in the winter get moved to the front of the line. When the temperature outside is in the 30s and your system is running only on backup electric strips, that is a genuine urgency call. Call us, and a live person answers immediately.
Heat Pump Replacement in Silverdale
Heat Pump Replacement in Silverdale is a decision that should start with one question: is the failure isolated to a single component, or has the system reached the point where another repair no longer makes sense? A full replacement in Silverdale runs $3,500 – $7,500 installed, and that price includes a manual load calculation, a matched indoor air handler, and a written start-to-finish installation plan.
We ran a replacement recently for a homeowner near the Clear Creek Road corridor whose garage had been partially converted without updating the load calculation. The old 2.5-ton Carrier unit had a failing capacitor and a refrigerant charge far enough off that the system kept running in aux heat. We ran a Manual J calculation, corrected the tonnage, and installed a new Trane heat pump with a matched air handler. The electric strip heat stopped cycling every cold morning, and the system finally matched the actual house, not the old guess.
Repair or Replace: The Honest Test
If the compressor has not failed and the coil is intact, a $150 – $650 repair is usually the right call, and we will tell you that plainly. If the system is over 15 years old, uses R-22 refrigerant, or needs a compressor replacement approaching half the cost of a new unit, replacement is the better money. Either way, you get our recommendation in writing with the price attached to both options.
Replacement Done by the Book
A proper Silverdale replacement includes a static pressure test and a duct inspection before the new unit goes in. Installing a high-efficiency heat pump onto undersized or leaky ducts starves the equipment and shortens its life. We measure, seal where needed, and verify airflow before we ever connect the condenser.
Trusted Brands We Service in Silverdale
We are factory-trained to install and service Goodman, Rheem, York, and Daikin heat pumps, along with five other major residential brands. Parts availability for Silverdale customers matters, and we keep common capacitors, contactors, defrost controls, and fan motors stocked on our trucks. That means a Friday afternoon repair does not roll into a Monday morning parts order any more often than absolutely necessary.
If you need a replacement and have a brand preference, we will quote the equipment line you want. If you do not, we will spec the right tonnage and efficiency level for your house and your electric bill, and show you the price difference in writing before anything is ordered.
Common Heat Pump Installation Problems We See in Silverdale Homes
- Rule-of-thumb sizing without a load calculation. Older Silverdale homes were often sized by square footage alone. The result is a unit that cycles hard through the damp 30s, never dehumidifies properly in summer, and wears out early.
- High-efficiency equipment starved by bad ducts. A new SEER2-rated heat pump installed on undersized or leaky ductwork will not deliver its rated efficiency. We measure static pressure before the install, not after the complaint.
- Defrost issues misdiagnosed as “heat pumps don’t work here.” A failed outdoor sensor or low refrigerant charge can mimic a system that simply cannot heat. We have corrected both on simple service calls in Silverdale homes where another company recommended full replacement.
- Garage conversions and additions that never updated the load. Extra square footage without a revised Manual J means the old heat pump is suddenly undersized. We see this around Dyes Inlet and the neighborhoods off Waaga Way, and the fix starts with measuring the house, not guessing at tonnage.
Pricing for Heat Pump Installation in Silverdale, WA
A complete heat pump installation in Silverdale runs $3,500 – $7,500. The spread comes down to equipment tier, home size, and whether the air handler and ductwork need modification. A single-stage Goodman system in a smaller home sits at the lower end. A higher-efficiency Rheem or Daikin unit with a variable-speed air handler and duct sealing work lands toward the upper end. A heat pump repair in Silverdale runs $150 – $650, and a tune-up runs $80 – $200. Every quote is written, itemized, and honored at the price on the page.
| Service | Price Range |
|---|---|
| Heat Pump Installation | $3,500 – $7,500 |
| Heat Pump Repair | $150 – $650 |
| Heat Pump Tune-Up | $80 – $200 |
Call (361) 306-9515 for a free estimate on any of the above. A live person answers. The estimate is free, written, and good for a full year.
We Also Serve Cities Near Silverdale
Beyond Silverdale, our crews cover Silverdale and the surrounding Kitsap Peninsula communities, including Poulsbo, Tracyton, Bremerton, and Suquamish. If your heat pump is acting up and you are within a short drive of the Clear Creek corridor, we can likely get a truck to you the same day. Scheduling is coordinated through our Seattle office, and crews serve Silverdale locally.
Serving Silverdale, WA - Our Local Coverage Area
We’re based in the Silverdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Silverdale
Yes, a properly sized modern heat pump works as the sole heating source for most Silverdale homes. The Kitsap Peninsula rarely drops below the operating range of a cold-climate heat pump, and many homes here use a heat pump as their only heating and cooling source. What matters is the load calculation: if the unit is sized for the square footage and the ducts are adequate, you will not need a backup furnace. If the system was sized by rule-of-thumb, you may find yourself running auxiliary electric strips, which is the real reason some local homeowners think a heat pump alone cannot do the job. Call us at (361) 306-9515 for a load calculation before you commit to a replacement.
A Manual J load calculation measures the actual heating and cooling demand of your Silverdale house, including window area, insulation, ceiling height, and orientation. It can change the recommended tonnage from what a square-footage guess would suggest, which changes the equipment price by hundreds or thousands of dollars. It also prevents you from paying for efficiency a leaky duct system will never deliver. We include the load calculation in every replacement quote at no extra charge.
A heat pump that trips the breaker during cold Silverdale weather is often pulling high amperage from a failing compressor, a bad capacitor, or a restricted coil. A $150 – $650 repair may resolve it, but if the compressor itself is the culprit, the repair can approach half the cost of a new system. That is the point where replacement is usually the better money, and we will show you both numbers in writing so you are deciding on data, not a guess. Call (361) 306-9515 for a diagnostic visit.
SEER2 is the updated efficiency rating for heat pumps and air conditioners, measuring cooling output per watt of electricity under more realistic operating conditions than the old SEER test. For a Silverdale home, it translates directly to what you pay on your electric bill each summer and through the shoulder seasons when the system is cycling. A higher SEER2 unit costs more up front but draws less power every hour it runs. We will show you the payback math on any quote.
A heat pump in Silverdale should be serviced once a year, ideally in the fall before the wet season sets in. A tune-up runs $80 – $200 and covers the refrigerant charge, defrost operation, electrical connections, airflow measurement, and a written report of what was checked and what was found. Catching a low charge or a failing capacitor in October is a lot cheaper than discovering both in January when the outdoor coil is iced over and the strips are running. Call (361) 306-9515 to schedule.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Silverdale since 2003.