Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Heat Pump Installation Across Savannah
A heat pump installation in Savannah, TX should be sized for both the humid 100-degree afternoons we get in July and the hard freezes that hit Bryan County every few winters. If you need Savannah AC Repair before upgrading, we can assess whether your current system is worth fixing. Most full-system heat pump installations here run $3,500 – $7,500, and a proper load calculation is what separates a system that runs efficiently from one that short-cycles and leaves rooms clammy. Our crews know Savannah’s housing stock, its ductwork quirks, and its real design temperatures. Call (361) 306-9515 for a free estimate with the price in writing before any work begins.
Why Dalton Heating & Air Is Savannah’s Preferred Heat Pump Installation Company
Homeowners across Savannah call us because we do the one thing most contractors skip: a full load calculation before we quote anything. We’re not guessing at tonnage based on square footage alone. We measure the house, the windows, the duct layout, and we plug in Bryan County’s actual design temperatures. That’s why the systems we install in Savannah hold temperature steady in August and still heat through a January cold snap. Marco Benitez leads our team, and he’s built our reputation around one rule: the price you’re quoted is the price you pay, printed before we start.
Every technician who comes to a Savannah home is background-checked, uniformed, and factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment. We answer the phone with a live person 24/7, so when a Savannah homeowner calls at 9 p.m. with a heat pump that quit, they reach a human, not a voicemail queue. Our 365-Day Done Right Promise covers every installation for a full year. If it’s not done right, we make it right.
Ductless Heat Pump Installation in Savannah
Ductless Heat Pump Installation in Savannah means putting a variable-speed outdoor unit on the gable end or a pad and running a small refrigerant line set to one or more indoor air handlers, no ductwork required. It’s the right call for Savannah homes with window units, additions, enclosed garages, or rooms that never get comfortable because the existing ducts don’t reach them properly.
When Ductless Makes Sense
An older Savannah home with no central ducts can get real heating and cooling without ripping out drywall. A room addition over a slab, a converted attic, or a detached workshop is often cheaper to condition with a ductless mini split than by extending the existing plenum. The equipment is quieter, and each indoor unit runs on its own thermostat, so you’re not paying to condition empty rooms.
What It Costs
Single-zone ductless installations in Savannah typically fall between $3,500 and $7,500 depending on the indoor unit count and the refrigerant line run. Multi-zone work lands higher because of the additional line sets and the labor to pull and flare them. Every quote includes a written line-item price before any work begins.
Heat Pump Service in Savannah
Heat Pump Service in Savannah covers the maintenance and repair work that keeps an existing system from failing during the worst weather of the year. We weigh the refrigerant charge, test defrost operation, check the reversing valve, and measure static pressure. Most heat pump repairs here run $150 – $650 depending on the part.
What Service Actually Includes
A proper heat pump service call in Savannah starts with a full diagnostic, not a sales pitch. When a capacitor is weak, we catch it before it takes out the compressor. When the outdoor coil is packed with cottonwood and dust, we wash it so the system can actually reject heat. When the defrost board is misbehaving, we catch it before the unit freezes up in a January cold snap.
What a Tune-Up Costs
A heat pump tune-up in Savannah runs $80 – $200 and includes a written report of what was found, what was checked, and what might need attention later. Technicians are not paid on what they sell, so the report you get is the actual condition, not a list of scare items.
Trusted Brands We Service in Savannah
Dalton Heating & Air carries and installs Goodman, Rheem, and Daikin equipment, and we service all nine major residential HVAC brands. That matters in Savannah because our vans leave the metro stocked with common failure parts rather than an empty promise to come back next Tuesday. A Rheem heat pump with a failed defrost sensor doesn’t help you cool the house. We’d rather fix it the same day, and keeping local parts inventory is how we do it.
Common Heat Pump Installation Problems We See in Savannah Homes
- Skipped load calculations. Contractors install a heat pump sized only for Savannah’s July heat, so it short-cycles through mild months and never dehumidifies properly. The result is a cool-but-clammy house and a compressor that’s cycling itself to an early grave.
- Refrigerant charge not weighed in. A system charged by “feels right” instead of a scale runs inefficient in both heating and cooling. In Savannah’s humid summer, an overcharged unit cools poorly; in winter, an undercharged one can’t extract heat from cold air. The fix is simple: weigh the charge, not guess it.
- Ignored duct static pressure. Restricted ducts, undersized returns, and dirty coils push static pressure beyond what the blower was rated for. Even a correctly sized heat pump loses capacity and the blower motor works harder than it should, which shows up on the electric bill and shortens equipment life.
- That oversized-unit trap. Our techs were called to a home in the Saddlewood neighborhood of Savannah, TX, where the existing AC was failing and the homeowner couldn’t decide whether a heat pump was worth it. We ran a full load calculation and found the old system was oversized by nearly a ton. We installed a correctly sized 3-ton Carrier heat pump with a matched air handler, and the homeowner noticed steadier temperatures and a lower electric bill almost immediately. The old capacitor was also weak, which we caught during the changeout.
Pricing for Heat Pump Installation in Savannah, TX
A full heat pump installation in Savannah runs $3,500 – $7,500 for a complete system with new indoor air handler and outdoor unit. Repairs on an existing system run $150 – $650 for most jobs, while a furnace repair falls between $150 – $700. A seasonal tune-up is $80 – $200. The table below shows what those numbers cover.
| Service | Savannah Price Range |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
What actually moves the price in Savannah is the size of the system after a load calculation, the condition of the existing ductwork, and whether you need any electrical or refrigerant line updates. We give you a fixed written price before the first tool comes off the truck. Call (361) 306-9515 for a free estimate.
We Also Serve Cities Near Savannah
Dalton Heating & Air handles Heat Pump Installation for homeowners across Bryan County and beyond. If you’re in Houston, San Antonio, Dallas, or Fort Worth, our crews can schedule a load calculation and a written quote for your home. We coordinate dispatch from the Dallas-Fort Worth office, and we route local crews to Savannah and its surrounding communities.
Serving Savannah, TX - Our Local Coverage Area
We’re based in the Savannah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Savannah
If the compressor is still healthy and the system is under 12 years old with no refrigerant leaks, a repair usually makes sense at $150 – $650. If the compressor has failed, the refrigerant is R-22, or the ductwork is causing repeated failures, replacement becomes the better math in Savannah. We’ll give you the repair price in writing along with the replacement cost and let you decide with actual numbers in front of you, not a sales pitch. Call (361) 306-9515 for an honest read.
There is no one-size answer for Savannah. The right tonnage comes from a Manual J load calculation that uses Bryan County’s actual design temperatures, the home’s window orientation, insulation levels, and duct condition. Skip that step and you risk short cycling in mild weather and poor dehumidification through the humid months. A load calculation is part of every installation quote we give.
Most heat pump installations in Savannah run $3,500 – $7,500 for a full system. The exact number depends on the equipment efficiency, the existing ductwork, and any electrical work required. You get a written quote with a firm price before any work begins. Call (361) 306-9515 and we’ll schedule the load calculation and measurement at no charge.
SEER2 is the updated efficiency testing standard that reflects real-world ductwork and static pressure conditions better than the old SEER number. In Savannah’s long cooling season, a higher SEER2 rating means lower summer electric bills, and on a system that runs nearly year-round, that difference compounds. We’ll show you the payback math on two or three equipment options so you’re choosing with real numbers.
Yes, we install ductless mini split heat pumps throughout Savannah, including homes without existing ductwork, room additions, converted garages, and spaces a central system never reached. A single-zone installation typically falls between $3,500 and $7,500 depending on line set length and indoor unit count. We’ll give you a fixed written price before any work starts.
For a free heat pump installation estimate in Savannah, call (361) 306-9515. We’ll run the load calculation, put the price in writing, and give you a straight answer on what your home actually needs.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Savannah, TX. Dalton Heating & Air is a Garrison Partners company founded in 2003.







Before
After
Before
After
Before
After