Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across San Antonio
Heat pump installation in San Antonio typically runs $3,500 – $7,500 for a full system, and a proper install starts with a room-by-room load calculation, not a guess based on the old unit’s data plate. That’s how we size every job at Dalton Heating & Air. If you’re in San Antonio and your current heat pump is short cycling in August or struggling to hold heat when Pasco County nights drop into the 20s, call (361) 306-9515. We’ll send a factory-trained tech, put the price in writing before any work starts, and schedule the install around your life, not ours.
We know the houses out here. Slab-on-grade builds in the Villages of Avalon, short duct runs off County Line Road, units crammed into tight side yards where airflow matters more than the sticker on the box. That’s why our Heat Pump Installation process starts with measuring what your house actually needs. San Antonio’s climate punishes a wrong-sized heat pump in both directions. We plan for that.
Why San Antonio Homeowners Call Dalton Heating & Air First
Dalton Heating & Air has been a Garrison Partners company since 2003, and we operate under The Garrison Standard on every single job in San Antonio. That means three non-negotiable terms. A written price before any work begins. A written guarantee on every repair. And a free return visit if the repair fails within the guarantee period. No asterisks, no upgrade fee, no “that’s a different department.”
The crew that shows up at your door in San Antonio is background-checked, uniformed, and factory-trained to service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. You’ll know the tech’s name before they arrive, and the phone is answered by a live person 24 hours a day, seven days a week. When a heat pump quits during a Florida cold snap or a 95°F afternoon, nobody wants a voicemail queue. You get a person who can dispatch someone to San Antonio right away.
The 365-Day Done Right Promise is our full-year commitment. If the work isn’t done right, we make it right. Not within 30 days. Within a year. Marco Benitez runs this location, and he holds every tech to The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That’s the deal, every time.
Ductless Heat Pump Installation in San Antonio
Ductless heat pump installation in San Antonio is a practical fit for the older block homes and converted garages scattered across this part of Pasco County where adding ductwork would mean tearing out ceilings or losing closet space. These systems mount an outdoor condenser and connect it to slim indoor wall or ceiling units by refrigerant lines. No ducts, no attic work, no drywall repair. For add-on rooms, workshops, or a stubborn hot bedroom, a ductless heat pump lets you set temperature room by room. A full ductless install in San Antonio runs in the $3,500 – $7,500 range depending on how many indoor heads you need.
When Ductless Makes Sense Here
San Antonio homes built before central air became standard often have no duct trunks at all. Running a mini split into those rooms is faster and cleaner than retrofitting. We see this a lot in older sections near the I-75 corridor where the original house dates back decades and the addition came later. Ductless is also the right call for a sunroom or lanai conversion that never cools down in July. Room-by-room zoning means you’re not paying to cool space you aren’t using.
What the Install Involves
The outdoor unit sits on a pad, the indoor unit mounts on an exterior wall, and a 3-inch chase hides the line set. The electrical load gets checked, the condensate is routed to drain properly, and the system gets commissioned with a full refrigerant and airflow verification. We don’t leave until the unit heats and cools in both modes. Every ductless heat pump install in San Antonio gets the same written price and the same 365-Day Done Right Promise as a full central system.
Heat Pump Service in San Antonio
Heat pump service in San Antonio means diagnosing and repairing the exact system you already have, and the most common calls we get are breaker trips, ice on the outdoor coil, and air that’s lukewarm in one mode and fine in the other. Service calls in San Antonio run $150 – $650 depending on the part and the repair. A pre-season tune-up costs $80 – $200 and catches most failures before they become middle-of-August emergencies.
What a Service Call Covers
We check the capacitor, contactor, refrigerant charge, defrost board, reversing valve, and thermostat calibration on every diagnostic. On the air side, we measure static pressure and confirm the blower is moving the right CFM. A heat pump that’s short cycling on a 95°F San Antonio afternoon often has a failing capacitor or a dirty condenser coil. A unit that won’t switch to heat on a 28°F morning may have a stuck reversing valve. We find the real fault before we touch anything, and the repair price is in writing before a wrench turns.
Repair or Replace – The Honest Math
If the compressor and heat exchanger still test in spec, a $300 repair beats a $7,500 replacement. We tell San Antonio homeowners that to their face, even when it costs us a bigger job. But when the compressor is gone on a 12-year-old unit and the efficiency has already degraded to SEER2 levels that show up on the FPL bill, replacement with a proper load-calculation-matched system is the cheaper decision over five years. We walk you through both scenarios with your actual numbers.
Trusted Brands We Service in San Antonio
We install and service Goodman, Rheem, and Daikin heat pumps in San Antonio, and we keep common parts stocked locally so a repair doesn’t wait on a parts house in Tampa. Goodman systems have a reputation for simple, long-lived performance without the premium markup. Rheem and Daikin bring stronger efficiency options and inverter-driven compressors that reduce short cycling in San Antonio’s mild shoulder seasons. Our techs are factory-trained on every brand we touch, which means the install and the service meet the manufacturer’s spec, not a shortcut interpretation. Parts arrive from a local distributor, not a drop-ship from out of state.
Common Heat Pump Installation Problems We See in San Antonio Homes
- Wrong tonnage from out-of-state installers. A crew that never worked in Pasco County will read “3 tons” off the old data plate and swap it same-size. San Antonio’s humid 95°F summers and 20s winter nights punish that mistake. An oversized unit short cycles in July, never dehumidifies, and ices up in January. An undersized unit runs 18 hours a day and can’t hold setpoint. We run a Manual J load calculation every time.
- Leaky ducts in hot attics eating your SEER2. Most San Antonio homes sit slab-on-grade with ductwork in the attic, where summer attic temps hit 140°F. A new high-efficiency heat pump paired to old, leaky ducts throws efficiency away before the refrigerant charge settles. We measure static pressure and duct leakage and fix what needs fixing as part of the install.
- Defrost problems from our winter humidity. Heat pumps in San Antonio run defrost cycles more often than drier climates do. A unit with a weak defrost board or a mis-wired sensor will freeze solid on a 30°F damp morning. We see this every winter, and it’s usually a $150 – $450 repair, not a replacement.
- Quotes based on box SEER2 alone. The sticker number is a lab rating. The installed number is what your bill sees. Thermostat calibration, refrigerant charge, static pressure, and duct integrity change the real-world efficiency. We commission every install to the manufacturer’s spec and verify airflow and charge before we call it done.
Pricing for Heat Pump Installation in San Antonio, FL
| Service | Price Range |
|---|---|
| Heat pump installation (full system) | $3,500 – $7,500 |
| Heat pump repair / diagnostics | $150 – $650 |
| Pre-season heat pump tune-up | $80 – $200 |
A full heat pump installation in San Antonio lands between $3,500 and $7,500. What moves the number: system size from the load calculation, SEER2 rating, whether the air handler is in the garage or the attic, and how much duct sealing or replacement the install includes. A 14-SEER2 Goodman system in a 1,600-square-foot slab home is a different price than an 18-SEER2 Daikin inverter model with a variable-speed air handler. We give San Antonio homeowners a written, fixed quote before any work starts. That’s the price, full stop. Call (361) 306-9515 for a free estimate.
We Also Serve Cities Near San Antonio
Our heat pump installation and service work covers all of San Antonio plus the surrounding Pasco County communities. That includes Wesley Chapel, Dade City, Zephyrhills, and Brooksville. If you’re on the edge of San Antonio or just outside in one of these towns, call us. Dispatch and scheduling are coordinated from the Miami office, and crews serve San Antonio locally, so you get the same written pricing and the same full-year guarantee regardless of your zip code.
Serving San Antonio, FL - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in San Antonio
The honest answer comes from three numbers: the age of the unit, the cost of the repair, and what your current system’s real efficiency is against what a new one would deliver. A $200 capacitor on a 7-year-old heat pump is a repair. A dead compressor on a 13-year-old unit is usually a replace decision, especially when the new system’s SEER2 rating cuts the FPL bill enough to make the math obvious within five years. On a specific home in the Villages of Avalon off County Line Road, we found a bad capacitor and low refrigerant on a 12-year-old Carrier, but the compressor and heat exchanger were still healthy. We showed the client the repair price against the projected energy savings of a new load-matched system, and they chose the install once the numbers were on paper. Call (361) 306-9515 and we’ll do the same for your San Antonio home.
Every single one. We run a Manual J room-by-room load calculation before we quote any heat pump installation in San Antonio. That means we measure window area, insulation levels, ceiling height, orientation, and square footage for each room, not just the house. San Antonio’s dual-season climate means an oversized unit short cycles in summer and fails to dehumidify, and an undersized one can’t hold heat on a 25°F morning. A same-tonnage swap off the old data plate skips all of that and wastes your money on both ends. If a contractor quotes you without a load calculation, that’s your red flag.
SEER2 is the cooling efficiency rating under updated federal test standards. A higher number means lower operating cost per hour of cooling. In San Antonio, where heat pumps handle both 95°F summers and 28°F winter nights, the heating season performance (HSPF2) matters just as much. The real point is this: the installed SEER2 is what your bill sees, not the number printed on the box. We commission every system to spec and verify airflow, refrigerant charge, and duct integrity so the efficiency you paid for is the efficiency you get. A sloppy install on a 17-SEER2 unit can deliver the real-world performance of a 13-SEER2 unit.
When a heat pump dies during a 95°F San Antonio afternoon or a winter night in the 20s, we treat it as the urgent call it is. Live dispatch is available 24/7, and we route the nearest tech to San Antonio the same day in most cases. Emergency service calls run $150 – $650 depending on the diagnosis and repair. If the system is dead and the cost to repair isn’t justified, we’ll give you a written replacement quote on the spot and schedule the install as soon as possible. No overtime surcharge for nights or weekends, and the repair is guaranteed in writing for a full year.
Yes. We install ductless heat pump and mini split systems throughout San Antonio, and they’re a clean solution for older slab homes where running ductwork would mean demolition. These systems work room by room, so a sunroom that’s always hot or a bedroom that never warms up gets its own thermostat. Ductless installs run $3,500 – $7,500 depending on the number of indoor units and the system size. The install is clean, the price is written before we start, and the whole system is covered by the 365-Day Done Right Promise. Call (361) 306-9515 for a free walk-through and quote.
Call Dalton Heating & Air for Heat Pump Installation in San Antonio
If you need straight answers about heat pump installation in San Antonio, call (361) 306-9515. You’ll speak with a live person, not a queue. We’ll schedule a time that works, arrive inside the window, run the load calculation, and put the price in writing before any work starts. That’s The Garrison Standard, and it has been since 2003. Marco Benitez and the Dalton Heating & Air team serve San Antonio with factory-trained techs, a full-year written guarantee, and a free second visit if the repair fails. Estimates are free. The phone is answered now.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving San Antonio and Pasco County since 2003.