Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Rollingwood
Heat pump installation in Rollingwood typically runs $3,500 – $7,500 for a full system swap, and the job takes one to two days depending on your ductwork and air handler access. Whether you’re replacing a unit that died mid-August or planning ahead before the next hard freeze, we schedule Rollingwood installs with a written price before any work starts. You can reach our live 24/7 line at (361) 306-9515 for a free estimate.
We know Rollingwood’s specific problem: homes here get beaten on by Hill Country heat from June through September, then asked to carry real heating loads when a blue norther drops temperatures into the teens. A heat pump sized for Austin’s cooling load alone won’t do that second job. Our Heat Pump Installation team runs a full load calculation on every Rollingwood home, not just a tonnage match, because the hillside lots and west-facing glass in this area change the math.
Why Dalton Heating & Air Is Rollingwood’s Preferred Heat Pump Installation Company
Dalton Heating & Air, operating under The Garrison Standard since 2003, handles heat pump work across Rollingwood with crews who know the local housing stock: 1960s ranch homes off Rollingwood Drive, newer builds near Eanes Creek, and hillside properties where the outdoor unit has to sit on a sloped pad. Marco Benitez, who leads our team, insists on the same rule for every Rollingwood job: written price before any work starts, a written guarantee on the repair, and a free return visit if the work fails within the guarantee period.
We answer our own phones, 24 hours a day. Not a call center, not a voicemail queue. When a Rollingwood homeowner calls at 9 p.m. because the heat pump breaker tripped during a cold snap, a real person picks up and tells you when a uniformed technician will be in your driveway. Dispatch for Rollingwood is coordinated from our Dallas-Fort Worth office, but the crews running these calls work locally and know the terrain.
Every technician is background-checked and factory-trained to service nine major residential brands, including the ones we see most often in Rollingwood: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. The 365-Day Done Right Promise covers every installation we do. If something isn’t right, we make it right. That’s the whole point of the guarantee.
Ductless Heat Pump Installation in Rollingwood
Ductless Heat Pump Installation in Rollingwood is the right call when a home has no existing ductwork, or when the ducts that are there have static pressure too high for a standard air handler to push against. We see this regularly in older Rollingwood houses where the original duct design assumed a gas furnace, not a heat pump, and the air handler ends up starving for return air in both modes. A ductless mini-split sidesteps that problem entirely by putting the coil right in the room.
A ductless install in Rollingwood runs the same $3,500 – $7,500 range as a conventional system, though multi-zone layouts can go higher for larger homes. The labor includes mounting the indoor heads, running the line set through exterior walls, and setting the outdoor condenser on a level pad or wall bracket. Rollingwood lots are often terraced, so we account for slope and drainage when choosing pad location.
Single-Zone Mini-Split Systems
A single indoor head paired with one outdoor condenser covers one large room or an open living area. These are common in Rollingwood garage conversions and sunrooms that were never tied into the main ducted system. They’re also a clean fix for a home office over a garage that bakes in the afternoon sun.
Multi-Zone Ductless Layouts
Two to five indoor heads run off one outdoor unit, each with its own thermostat control. This suits Rollingwood homes where the master suite faces west and needs more cooling than the north-facing bedrooms. Each zone gets its own refrigerant line, so one head can run in heating while another runs in cooling if the house has that kind of mixed load.
Heat Pump Service in Rollingwood
Heat Pump Service in Rollingwood covers everything from a no-heat call during a February freeze to a seasonal tune-up that catches a drifting refrigerant charge before it shows up on your bill. A service call in Rollingwood runs $150 – $650 depending on what the technician finds. A seasonal tune-up and thermostat calibration runs $80 – $200 and includes a written report of what was actually measured: static pressure, refrigerant subcooling, amp draw, temperature differential.
Heat pump service is where we catch the failure modes Rollingwood is known for. A heat pump that starts short-cycling in heating mode is often a staging problem with the auxiliary heat strip, not a failed compressor. A unit that runs fine in cooling but struggles in heating usually has a refrigerant charge issue. You don’t fix those with a filter change; you fix them with gauges and a proper diagnosis.
Refrigerant Charge and Performance Testing
A heat pump can lose performance gradually after a bad service valve or a slow leak, and the homeowner notices it first as a higher electric bill. We test subcooling and superheat against manufacturer spec, not a generic number. Getting the charge right is what makes the SEER2 rating real instead of a sticker on the box.
Auxiliary Heat Strip Staging and Control
Rollingwood heat pumps lean on auxiliary heat during cold snaps, which is the design intent. The problem comes when the strips are wired to come on too early or stay on too long, and the system runs on emergency heat all winter. We check strip staging, thermostat wiring, and lockout settings so the heat pump does the heavy lifting and the strips only supplement when outdoor temperatures genuinely demand it.
Trusted Brands We Service in Rollingwood
Our Rollingwood crews carry parts for Goodman, Rheem, and Daikin systems, and we install from those same brands plus York depending on the application and your budget. That local parts shelf matters when a capacitor fails on a 105-degree Saturday and the unit is down. We don’t have to order from a warehouse in another city and make you wait through a heat advisory weekend. For full system replacements, we match the brand to the load calculation and the ductwork realities of the home, not to whatever happens to be in stock at the shop.
Common Heat Pump Installation Problems We See in Rollingwood Homes
- Undersized cooling tonnage forced into a heating role. A 3-ton unit that chugs through an Austin summer may not carry a Rollingwood hard freeze on the heat pump alone, so the aux strips run constant and the January bill spikes. The right fix is a load calculation on the actual house, not a ton-for-ton swap.
- Refrigerant drift after a prior service call. A system that had a service valve replaced or a schrader core left loose will slowly lose charge, and both heating and cooling capacity drop before anyone notices anything beyond a higher bill. We see this on Rollingwood heat pumps that had work done by another company months earlier.
- High static pressure in older ductwork. Rollingwood homes built in the 1960s and 1970s often have duct runs sized for a furnace, and the air handler on a modern heat pump can’t push against that resistance. The result is low airflow in both modes and a system that never reaches rated efficiency.
- Outdoor units set on shifting hillside pads. The sloped lots along Rollingwood Drive and near Eanes Creek mean condenser pads settle or tilt over time, which stresses the refrigerant lines and the compressor. We level and secure the pad before commissioning a new system.
Pricing for Heat Pump Installation in Rollingwood, TX
Here are the real numbers for Rollingwood’s market:
| Service | Typical Price Range |
|---|---|
| Heat pump installation (full system) | $3,500 – $7,500 |
| Heat pump repair / service call | $150 – $650 |
| Seasonal tune-up and thermostat calibration | $80 – $200 |
What moves the installation number is equipment efficiency tier, ductwork modifications if your existing runs are undersized, and the complexity of the condenser pad and line-set routing on a hillside home. You get the exact price in writing before we order equipment, and it does not change at the door. Call (361) 306-9515 for a free estimate.
We Also Serve Cities Near Rollingwood
Our Heat Pump Installation in Rollingwood crews also cover the surrounding metros. If you’re in Houston, San Antonio, Dallas, or Fort Worth and need the same written pricing and full-year guarantee in your area, call us. We coordinate the schedule and send a local technician who shows up inside the window.
Serving Rollingwood, TX - Our Local Coverage Area
We’re based in the Rollingwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Rollingwood
A load calculation is mandatory on every Rollingwood heat pump install we do. Matching the old tonnage assumes the original sizing was correct, and in Rollingwood that assumption fails often: a house with west-facing glass, a hillside exposure, or an addition built after the original system was sized may need a different capacity. The calculation measures insulation levels, window area and orientation, ceiling height, and duct condition. Skipping it is how you end up with a unit that cools fine in July and runs on emergency heat all winter. Call (361) 306-9515 and we’ll run the numbers before quoting anything.
A heat pump running long cycles in heating mode during mild weather is often normal behavior for an inverter-driven or properly staged system. Running constantly during a Rollingwood cold snap while the auxiliary strips stay on is not normal, and it usually means the charge is low or the strip staging is wired wrong. Either way, a $150 – $650 service call gets you a diagnosis. If the outdoor unit’s coils are iced over and the defrost cycle never kicks in, that’s a service need, not a quirk. Call us to test it.
SEER2 is the efficiency standard used to rate cooling output against electrical input under real-world static pressure conditions. In practical terms, a two-point jump in SEER2 on a Rollingwood home that runs cooling from April through October cuts the cooling portion of your electric bill by a measurable amount, often 10 to 15 percent depending on your rates and thermostat habits. The number only holds if the refrigerant charge is correct and the duct static pressure is within spec. A high-SEER2 unit with a drifted charge performs like a much cheaper unit. We verify both during installation and on every service call.
The honest rule we use: if the repair is under $650 and the system is under 10 years old with a clean bill on the refrigerant side, repair it. If the compressor has failed, the R-22 system is leaking, or the repair pushes past half the cost of a new unit, replace it. Rollingwood’s hard-freeze heating demand makes replacement more attractive here than in milder climates, because a new heat pump sized correctly for heating load will lower your winter bill immediately. We’ll show you both numbers in writing and let you decide without pressure.
Yes. Ductless mini-split installation is a standard job for us in Rollingwood, and it works well for the older homes here that never had central air or where the existing ductwork is too restrictive for a modern air handler. A single-zone system runs in the same $3,500 – $7,500 range as many full-system installs, and multi-zone layouts scale from there. We run the line sets through exterior walls, level the condenser on the slope, and commission each zone with a full test. The result is real heating and cooling in rooms that a central system could never reach properly.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Rollingwood heat pump installation and service under The Garrison Standard since 2003.