Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Richwood
Heat pump installation in Richwood typically runs $3,500 to $7,500 for a full system, depending on size and ductwork condition. That’s not a vague guess. It’s what we see on real quotes in this part of Brazoria County. If you’re replacing an old AC or a failing heat pump, the first thing you need is a load calculation and a static pressure test on your attic ducts, not a salesman guessing from your floor plan. Call (361) 306-9515 for a free estimate with written pricing before any work starts.
We work in Richwood every week. Crews roll through Oyster Creek Drive, Parkwood, and the neighborhoods off FM 2004 and Highway 288, and we know what a slab-on-grade house with a vented attic does to heat pump airflow. That local knowledge changes what gets quoted and what gets installed. More on that below.
Why Dalton Heating & Air Is Richwood’s Preferred Heat Pump Installation Company
Richwood homeowners call us because we put the price in writing before any work begins, and we stand behind the install for a full year under the 365-Day Done Right Promise. Not a 30-day window. A full year. If something isn’t right, we make it right. That’s The Garrison Standard, and it applies to every job we do in Richwood.
Marco Benitez runs our heat pump installation work in this area. When you call, you’re talking to someone who has seen the duct layouts in Richwood’s Ranch-style homes and knows what a fouled condenser coil on a 15-year-old unit looks like before he opens the panel. Our technicians are background-checked, uniformed, and factory-trained to service nine major residential brands including Rheem, York, and Daikin.
Reviews from Richwood customers consistently point to the same things: we show up inside the stated window, we don’t change the price at the door, and we leave the site clean. Dispatch is coordinated from our Dallas-Fort Worth office, but crews serve Richwood locally. Calls are answered by a live person, 24/7. No voicemail queue, no callback window.
Mini Split Installation in Richwood
Mini Split Installation in Richwood makes sense when you’re adding comfort to a room that ductwork never reached: a converted garage, a sunroom off the back of a 1990s build, or a workshop behind the house. The process runs $3,500 to $7,500 for a full ducted system, but a single-zone mini split can come in lower depending on capacity and line-set length. We’ll quote it exactly before we start.
What matters here is the same thing that matters for any heat pump in Richwood: correct sizing. A mini split that’s oversized for the space will short-cycle, leave the room clammy in Brazoria County humidity, and cost more to run than it should. We size the unit to the room’s actual heat gain, not a rule of thumb.
When a Ductless Unit Beats Running New Ducts
Some Richwood homes have attic duct runs that leak or are crimped in ways that would cost thousands to repair properly. If the goal is comfort in one or two rooms, a ductless mini split often does the job for less money and with better humidity control than extending leaking ductwork. We’ll tell you honestly when that’s the case and when it isn’t.
Written Price, Set Install Date
A mini split install is scheduled work. We don’t show up same day and guess. You get a fixed price in writing, a set install date, and a one-year guarantee on the equipment and the labor. The condenser gets placed where it won’t flood, the line set gets run clean, and the wall penetration gets sealed properly for Richwood’s wet springs.
Heat Pump Maintenance in Richwood
Heat Pump Maintenance in Richwood runs $80 to $200 for a tune-up, and it’s the single most effective thing you can do to keep a heat pump from eating your electric bill. In this climate, coils foul fast. Pollen, mold, and coastal humidity work on the outdoor unit year-round, and a fouled coil raises head pressure and cuts capacity before you ever notice a comfort problem.
We check refrigerant charge against the manufacturer’s subcooling chart, test capacitors, inspect contactors, measure static pressure across the blower, and confirm that the reversing valve and aux heat strips cycle correctly. You get a written report of what we found, what we fixed, and what’s likely coming. Our technicians are not paid on what they sell, so the report is a condition statement, not a pitch deck.
Spring Prep Round for Richwood’s Humidity
Get the tune-up done before the first real heat wave. A system that’s low on refrigerant in April will struggle to dehumidify by June, and Richwood summers punish that. We see it every year: coils caked with oak pollen, filters collapsed, drain pans sludged. A flat-rate tune-up catches it early.
What the Written Report Actually Tells You
The report lists line-by-line what we measured and what the spec says. Not a green/yellow/red sheet. Actual numbers: subcooling, superheat, static pressure, amp draw, capacitor microfarads. If something’s off, we tell you what it means in plain terms and what it costs to fix. You decide.
Trusted Brands We Service in Richwood
We install and service Rheem, York, Daikin, and Bryant heat pumps, along with Carrier, Trane, Lennox, Goodman, and American Standard. That’s nine major brands, factory-trained, which means we’re not going to steer you toward whatever one distributor has in stock. For Richwood’s heat and humidity, we often spec variable-speed units that run long and low for better latent heat removal. We keep common replacement parts stocked for faster turnaround on repair calls, and we order matched AHRI systems for every full install.
Common Heat Pump Installation Problems We See in Richwood Homes
Richwood’s housing stock and climate create a specific set of failures. Here’s what we find most often when we’re called in to look at an existing system or fix a botched install:
- Oversized units matched to the old AC tonnage. A 4-ton AC gets replaced with a 4-ton heat pump because nobody ran a load calculation. The result is short cycling, poor dehumidification, and higher electric bills in Richwood’s humid shoulder seasons.
- Attic duct leakage and high static pressure. Heat pumps need rated airflow to deliver rated efficiency. In slab-on-grade homes with vents in the attic, we regularly find crushed flex, disconnected takeoffs, and return leaks that steal capacity. The blower motor works harder, and the SEER2 number on the spec sheet never shows up on the meter.
- Winter changeover problems. A mischarged heat pump or a thermostat calibrated wrong can cause aux heat strips to engage far more than they should. If the refrigerant charge drifts or the changeover setpoint is off, a Richwood winter cold snap gets expensive fast.
- No AHRI match on the coil and condenser. We see installs where the outdoor unit was replaced but the old indoor coil stayed. Efficiency drops, warranties get voided, and the homeowner never knows. We install matched systems only, with documentation.
Pricing for Heat Pump Installation in Richwood, TX
Here’s what heat pump work actually costs in Richwood right now:
| Service | Typical Price Range |
|---|---|
| Heat Pump / AC Installation (full system) | $3,500 – $7,500 |
| Heat Pump / AC Repair | $150 – $650 |
| Heat Pump Tune-Up | $80 – $200 |
What moves a full install to the high end of that range? Ductwork fixes, zoning, a variable-speed compressor, or an attic that needs return-side sealing. What moves it lower? A straightforward swap with existing ductwork that tests clean. The load calculation and static pressure test are how we know which end of the range you’re on. The estimate is free, and the price is in writing before we start. Call (361) 306-9515.
Heat Pump Installation in Richwood: The Attic Duct Reality
Here’s the thing about Richwood that most heat pump quotes miss. Brazoria County humidity and level lots mean most homes sit on slab-on-grade with ducts run through a vented attic. In summer, that attic bakes. In winter, it traps moisture. A heat pump’s heating performance depends as much on attic duct static pressure as on the outdoor unit’s rated capacity. That attic-duct reality is why heat pump sizing here rarely starts from square footage alone.
We recently installed a 3-ton Carrier variable-speed heat pump with a new AHRI-matched air handler in a one-story Ranch-style home. The old condenser coil was fouled and the refrigerant charge was low, so the system short-cycled and couldn’t hold temperature during a December cold snap. After a Manual J load calculation and a static pressure test, we sized down half a ton from the old unit, sealed two leaking return joints in the attic, and the new setup has held setpoint through both cooling peaks and winter mornings. The homeowner was quoted a 3.5-ton by another company that never looked at the ducts.
That’s the difference between an install that works and one that just runs. Our Heat Pump Installation team does the measurement work before we quote a single number. It’s not optional, and it’s included free.
We Also Serve Cities Near Richwood
Dalton Heating & Air serves the greater metro area around Richwood. If you’re in Houston, San Antonio, Dallas, or Fort Worth, we run the same Garrison Standard: written pricing, on-time arrival, and a full-year guarantee on every install. The drive is longer for us. The standards don’t change.
Serving Richwood, TX - Our Local Coverage Area
We’re based in the Richwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Richwood
Yes, a properly sized heat pump works for Richwood winters, which are mild compared to north Texas but still dip into the 30s. Modern cold-climate heat pumps hold rated capacity down to well below freezing. What matters more than the unit’s low-temperature rating is whether your attic ducts and refrigerant charge are correct. A mischarged heat pump on a 35-degree night will drag in aux heat strips and your bill will spike. Sized and charged right, a heat pump handles a Brazoria County winter without backup heat except on the coldest mornings. Call (361) 306-9515 and we’ll run the load numbers for your house.
A Manual J load calculation tells us the actual heating and cooling demand of your house, not the square-footage rule of thumb. That often means we size the unit half a ton smaller than the old equipment, which lowers equipment cost and long-term operating cost. It also tells us whether your existing ducts can move the required airflow at an acceptable static pressure. If they can’t, the quote includes what it costs to fix that. Sometimes that adds $1,500 to $2,500 to the job. Sometimes it changes nothing. Either way, you see the number before you sign.
SEER2 is the current federal efficiency metric, and it tests units under more realistic ductwork and external static pressure conditions than the old SEER number. A heat pump rated 16 SEER under the old test might rate 15 SEER2 or less. If a quote only lists SEER, ask for the SEER2 number. In Richwood, where attic static pressure is often high because of slab-on-grade duct runs, the SEER2 number is closer to what actually shows up on your electric bill.
It depends on the compressor’s age and condition, not just whether it currently runs. If the compressor is 12 to 15 years old and running high amp draw, you’re on borrowed time, and the cost of a compressor replacement often runs 40 to 60 percent of a new full-system install. A heat pump replacement gives you heating and cooling in one unit, and with Richwood’s mild winters, the heating mode will get real use. We’ll test the compressor and give you an honest repair-versus-replace number in writing.
Twice a year, once before cooling season and once before heating season. Richwood’s humidity, oak pollen, and coastal air foul coils and filters faster than drier climates. A tune-up runs $80 to $200, and it’s the cheapest way to keep the efficiency you paid for. We check charge, static pressure, and electrical components, and we hand you a written report. Heat pumps that get twice-yearly maintenance regularly outlast neglected units by five years or more in this climate. Call (361) 306-9515 to schedule.
Ready for a real heat pump quote in Richwood? Call (361) 306-9515 for a free estimate. Written pricing before any work starts. Full-year guarantee on every install. Marco Benitez and the Dalton Heating & Air crew stand behind it.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Richwood heat pump installation and repair.