Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Los Angeles
A full heat pump replacement in Los Angeles runs $4,130 – $8,850 depending on size, efficiency rating, and whether ductwork needs attention. Most installations take one day, and our crews carry the equipment and parts needed to get it right without dragging the job into a second afternoon. We schedule around your household, show up inside the window, and put the price in writing before any work starts.
Dalton Heating & Air has been a Garrison Partners company since 2003, which means every job follows the same discipline: written price first, work done by the book, site left clean, and a full-year written guarantee on the installation. If you’re reading this from Studio City, Van Nuys, or anywhere between the coast and the Valley, call (361) 306-9515 for a free estimate. A live person answers 24/7.
Why Dalton Heating & Air Is Los Angeles’s Preferred Heat Pump Installation Company
Los Angeles homeowners deal with a specific set of problems: homes built in a dozen different decades, microclimates that shift by the mile, and a steady stream of contractors who quote one number over the phone and a different one at the door. We run on The Garrison Standard. That means a written price before any work begins, on every job, without exception. It also means a 365-Day Done Right Promise: if the installation isn’t right, we make it right for a full year.
Every technician who arrives at your Los Angeles home is background-checked, uniformed, and factory-trained to service nine major residential brands including Trane, Lennox, Goodman, and Rheem. You’ll know who is coming before they pull up. Our Los Angeles office dispatches crews across the metro, from Echo Park bungalows to newer tracts in the San Fernando Valley, with the same on-time arrival standard on every call.
Marco Benitez leads our Los Angeles operation, and he’s built the crew around one idea: do the job by the book, leave the site clean, and stand behind the work. Homeowners who call us aren’t chasing the lowest bid. They’re done with no-shows and price games, and they want a crew that acts like their time is worth something. That’s the customer we’re built for.
Heat Pump Service in Los Angeles
Heat Pump Service in Los Angeles means diagnosing and repairing the system that heats and cools your home year-round, and most repair calls we run in the city fall between $175 and $765 depending on the failing part. In Los Angeles, a heat pump works hardest in cooling mode from July through October, but the same system also carries heating duty when those December mornings dip into the 40s. When it quits, you feel it fast.
What We Check on Every Service Call
A full diagnostic includes refrigerant pressure, capacitor condition, thermostat calibration, defrost board function, and amp draws on the compressor and fan motors. We use the trade term and then explain it plainly: a refrigerant recharge means topping off the cooling fluid your system needs to reach set temperature, and a weak capacitor is the small cylinder that gives the compressor the starting jolt it needs.
When to Call for Service Sooner Than Later
If your heat pump runs constantly without hitting the set temperature, short cycles on and off, or makes a grinding noise on startup, get it looked at before a small fix becomes a failed compressor. In coastal neighborhoods like Santa Monica where salt air accelerates corrosion on outdoor coils, catching a small leak early costs far less than replacing the unit a season later. We also replace capacitors during routine work, typically $175 – $300, which often prevents a summer breakdown before it happens.
Heat Pump Replacement in Los Angeles
Heat Pump Replacement in Los Angeles usually means removing the old outdoor condenser and indoor air handler and installing a matched new system sized to your home, with most like-for-like replacements running $4,130 – $8,850. A replacement makes sense when the existing unit is over 12 years old, uses R-22 refrigerant, or has a failed compressor with a repair quote that’s more than half the cost of a new system.
Repair Versus Replace: How We Help You Decide
We give you honest guidance, not a sales pitch. If your heat pump is eight years old with a $400 repair, we’ll tell you to fix it. If it’s fourteen years old with a leaking coil and a failing compressor, we’ll show you the math and let you decide. The 365-Day Done Right Promise applies either way, so you’re never gambling on the outcome.
A Proper Load Calculation Changes the Size
Many Los Angeles homes are running heat pumps that were sized by square footage alone, not by a room-by-room load calculation. A Manual J calculation accounts for window orientation, ceiling height, insulation, duct leakage, and the local microclimate, which in Los Angeles can mean the difference between a 4-ton guess and a 2.5-ton correct fit. We run this calculation before we recommend any equipment, and we’ve seen the oversized units driving up bills all over the city.
Trusted Brands We Service in Los Angeles
Our technicians are factory-trained on nine major residential brands, and we commonly work on Trane, Lennox, Goodman, and Rheem systems across Los Angeles. We keep common replacement parts stocked for these brands, which means faster turnaround for Los Angeles customers when a repair is needed. Whether your home has an older Trane split system or a newer Goodman unit, we diagnose it the same way: by the book, with a written price before work begins. For those exploring a new system, our Heat Pump Installation team handles the full process from load calculation to final startup.
Common Heat Pump Installation Problems We See in Los Angeles Homes
- Oversized systems from square-footage guesses. A heat pump too big for the home short cycles, which means it turns on and off constantly without running long enough to remove humidity. In coastal areas like Santa Monica, that leaves the house feeling clammy even when the temperature reads cool.
- Duct leakage in older homes. Homes built in the 1920s and 1930s, like many bungalows in Echo Park, often have ductwork with gaps and leaks. Even a perfectly sized heat pump has to fight that leakage, driving up runtime and electric bills.
- Skipping the load calculation to save a few dollars. Some contractors quote a replacement based on the old unit’s tonnage without recalculating. If the home’s envelope has changed, like new windows or added insulation, matching the old tonnage can leave you with a system that can’t handle inland San Fernando Valley heat or a rare January cold snap.
- Ignoring the capacitor during installation. A weak capacitor on the outdoor unit can fail within weeks of a new system going in, especially during a Los Angeles heat wave when the compressor works hardest. We check and often replace this small part during the final inspection, a $175 – $300 fix that prevents a no-cooling call in August.
Pricing for Heat Pump Installation in Los Angeles, CA
Here are the line-item ranges for heat pump work in Los Angeles. These are honest numbers based on what we actually charge across the metro, from coastal zones to the Valley.
| Service | Price Range |
|---|---|
| Heat Pump Installation (full system) | $4,130 – $8,850 |
| Heat Pump Replacement (like-for-like) | $4,130 – $8,850 |
| Heat Pump Service (diagnostic/repair) | $175 – $765 |
| Capacitor replacement | $175 – $300 |
| Thermostat calibration | $95 – $235 |
What moves the price on a full installation is the system’s tonnage, SEER2 rating, and whether your existing ductwork needs sealing or replacement. A higher SEER2 rating costs more upfront but lowers the monthly electric draw, which matters in Los Angeles where your heat pump runs in cooling mode most of the year. We give you a written estimate before any work begins, so the number you see is the number you pay. Call (361) 306-9515 for a free estimate.
We Also Serve Cities Near Los Angeles
Our crews handle heat pump work across the Los Angeles metro, including Huntington Park, South Gate, Bell, and Maywood. If you’re just outside the city line and need a straight answer on repair versus replacement, the same written-price standard applies. For more on what we do locally, see Heat Pump Installation in Los Angeles and the surrounding neighborhoods we cover.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Los Angeles
Yes. Los Angeles homes vary from 1920s bungalows near Echo Park to newer builds in the Valley, and a Manual J load calculation accounts for window orientation, insulation, duct condition, and the specific microclimate of your neighborhood. Skipping it often leads to an oversized or undersized system, both of which waste energy. Call (361) 306-9515 to schedule one with your estimate.
For most Los Angeles homes, a 15 – 16 SEER2 rating balances upfront cost against long-term electric savings, especially since cooling mode runs most of the year. Higher ratings like 18 SEER2 make more sense for larger homes or inland Valley locations with hotter summers. We’ll show you the numbers for your specific home before you commit.
Once a year is enough for most systems, ideally in early spring before the heavy cooling season. Los Angeles’s dry, dusty conditions mean coils and filters load up faster than in wetter climates, so an annual tune-up between $95 and $235 catches most issues early. A quick call to (361) 306-9515 is all it takes to book.
You can replace just the outdoor unit in some cases, but it’s often a bad match with the existing indoor coil and can reduce efficiency and shorten equipment life. We’ll tell you honestly if a partial swap makes sense for your Los Angeles home, or if a matched system is the better long-term move. The written estimate covers both options.
Repair is the right call when the unit is under 10 years old, the part is a known fail point like a capacitor or thermostat, and the repair cost is under half of replacement. Replacement makes sense at 12-plus years, with a refrigerant leak or compressor failure, especially if the unit uses R-22. We walk through the numbers on the spot and leave the decision with you. Call (361) 306-9515 for an honest assessment.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Los Angeles and surrounding communities since 2003.