Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Heat Pump Installation Across Lantana
A heat pump installation in Lantana typically runs $3,500 – $7,500 for a standard split system, and most jobs are completed in a single day once equipment is on hand. The price you pay depends on the size of your home, the efficiency rating you choose, and whether your existing ductwork can handle the new system. At Dalton Heating & Air, we put that number in writing before any work starts, and every install is backed by a full-year guarantee. If you’re weighing repair against replacement, call (361) 306-9515 and we’ll give you the straight answer, not a sales pitch.
Key takeaways for Lantana homeowners:
- Heat pump replacement in Lantana: $3,500 – $7,500 installed, written price before work begins
- Heat pump repair: $150 – $650 for most capacitor, contactor, and refrigerant charge work
- Seasonal tune-up: $80 – $200, flat rate with a written report of what we actually found
- Every install carries the 365-Day Done Right Promise: if it’s not done right, we make it right
Why Dalton Heating & Air Is Lantana’s Preferred Heat Pump Installation Company
Lantana homeowners deal with a specific set of HVAC headaches: humid winters, brutal summers, and attics that punish sloppy ductwork. Our techs know the subdivisions off FM 407 and Lantana Trail, and we’ve worked in enough homes near the Lantana Golf Club to understand how exposed slab foundations and unconditioned attic runs change the way a heat pump needs to be installed. We don’t guess at tonnage. We run a Manual J load calculation on every replacement, and that’s why our systems don’t short-cycle in March or struggle in August.
Dalton Heating & Air is a Garrison Partners company, held to The Garrison Standard since 2003. That means a written price before any work begins, a background-checked uniformed technician on every call, and a 365-Day Done Right Promise on every install. If the work doesn’t hold, we come back at no charge – that’s the Garrison Code, and there’s no upgrade fee attached to it. Marco Benitez leads the team, and he holds every job to that standard. Our techs are factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so the brand on your existing unit doesn’t matter to us.
When you call (361) 306-9515, a live person answers. Not a voicemail queue. Not a callback window. That matters when your heat pump decides to cycle cold air on a 35-degree Lantana morning.
Heat Pump Service in Lantana
Heat pump service in Lantana usually means diagnosing a system that’s not holding temperature, not defrosting correctly, or making noise it shouldn’t. Most repairs here run $150 – $650, and the most common calls we get are capacitor failures, contactor replacements, and refrigerant charge corrections. When a heat pump goes into defrost on a humid winter morning – which happens a lot in Lantana’s climate – a bad sensor can blow cold air at the vents for ten minutes straight. Homeowners assume the unit died. Usually, it just needs calibration.
Defrost Cycle Diagnostics
Lantana’s winter mornings sit right at the temperature where heat pumps cycle through defrost frequently. That’s normal operation. What’s not normal is when the defrost board misreads the sensor and the system holds in defrost too long, or the reversing valve sticks. Our techs check the defrost sensor, board logic, and reversing valve operation on every service call, not just the obvious stuff. The fix is often under $200. Replacing a unit over it is a $4,000 mistake we’d rather you not make.
Refrigerant Leak Detection
A heat pump losing cooling fluid – what the trade calls refrigerant – won’t hold temperature in August, and Lantana’s summer heat index past 105°F makes that apparent fast. We run a full leak search on the coil, line set, and service valves. A simple recharge with a leak-free system is straightforward. A leak at the evaporator coil in an attic is a bigger conversation, and we’ll show you exactly where the leak is before we touch anything.
Heat Pump Replacement in Lantana
Heat pump replacement in Lantana is a $3,500 – $7,500 job for a standard split system, installed and commissioned. That range covers equipment efficiency levels from entry-level 14 SEER2 up to higher-efficiency 18 SEER2 units, plus the labor, refrigerant, line set flush, and startup verification. What it doesn’t cover is guessing at tonnage. We run a Manual J load calculation on every replacement – no exceptions – because Lantana homes get sold oversized units constantly. An oversized heat pump short-cycles in the mild shoulder seasons, which eats capacitors and contactors years before their time.
Manual J Load Calculation
Lantana sits in Denton County’s transition zone where winter design temperatures dip into the low 20s while summer humidity pushes heat index past 105°F. That means a heat pump here runs near its balance point in both seasons. The auxiliary heat strip and defrost cycle get far more runtime than in drier North Texas cities like Denton proper. If your new system isn’t sized to that reality, you’ll pay for it on every electric bill. We measure the conditioned square footage, window orientation, insulation levels, and duct layout of your specific home, then match equipment to the actual load, not the old nameplate.
Matching the Indoor Coil to Real Airflow
A correctly sized heat pump can still underperform if the indoor coil doesn’t match the air actually moving through the ducts. Lantana’s slab-on-grade subdivisions have long attic duct runs that lose static pressure fast. We check the existing ductwork before recommending equipment, because installing a 18 SEER2 unit on ducts that can’t deliver the airflow is throwing efficiency dollars into a leaky attic. When we swapped a home off Lantana Trail near the golf course recently, the old 3-ton Carrier had been oversized by nearly half a ton. We pulled an AHRI-matched Trane 16-SEER2 replacement, verified refrigerant charge and static pressure on the new air handler, and the homeowner’s February electric bill dropped the next cycle.
Trusted Brands We Service in Lantana
Our Heat Pump Installation team is factory-trained on nine major residential brands, including Trane, Lennox, Goodman, and Rheem. That means we can match your replacement to your existing line set, your thermostat, and your ductwork without forcing a brand change you don’t need. We keep common replacement parts for these brands in local stock for Lantana customers, so a capacitor or contactor repair doesn’t wait on a distributor truck from Dallas. If your existing system is a brand we service, we can most likely keep it running longer and cheaper than a company that only sells one line.
For homeowners anywhere in Lantana, that brand coverage translates to faster diagnostics and fewer return trips.
Common Heat Pump Installation Problems We See in Lantana Homes
- Oversized replacements sold by price-shoppers. Contractors who skip the load calculation default to “same tonnage as old,” and in Lantana’s short mild shoulder seasons an oversized heat pump short-cycles and wears the capacitor and contactor out early.
- Defrost cycle miswired or sensor faults. On a humid 35°F Lantana morning, a heat pump goes into defrost regularly. A bad sensor holds it there too long, dumping cold air at the vents for 10+ minutes while the homeowner assumes the unit failed.
- Duct leakage in unconditioned attics. Lantana’s subdivisions with long attic runs lose static pressure fast. A correctly sized heat pump still underperforms if the evaporator coil isn’t matched to actual delivered airflow.
- Mismatched indoor and outdoor units. A new high-efficiency outdoor unit paired with an old indoor coil won’t hit its rated SEER2, and the compressor runs harder than it should. We match AHRI-certified combinations, not whatever’s on the truck.
Pricing for Heat Pump Installation in Lantana, TX
Here’s what heat pump work actually costs in Lantana, as of this year’s local market:
| Service | Price Range |
|---|---|
| Heat pump diagnostic and repair (capacitor, contactor, refrigerant charge) | $150 – $650 |
| Heat pump replacement, standard split system installed | $3,500 – $7,500 |
| Seasonal heat pump tune-up (coil clean, charge check, thermostat calibration) | $80 – $200 |
What moves the replacement number is the equipment efficiency tier, your home’s square footage, and whether the existing ductwork needs sealing or modification. We quote a written, fixed price before any work starts – the number on the quote is the number you pay. No adjustments at the door. Estimates are free, and you can call (361) 306-9515 to schedule one. We’ll walk the property, take measurements, and give you the repair-versus-replace math for your specific heat pump.
We Also Serve Cities Near Lantana
Dalton Heating & Air dispatches from the Dallas-Fort Worth office, with crews serving Lantana locally. If you have family or a rental property in Houston, San Antonio, Dallas, or Fort Worth, the same Garrison Standard applies across every service area. Written pricing, on-time arrival, and the 365-Day Done Right Promise don’t change at the county line.
Serving Lantana, TX - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Lantana
Yes, for most Lantana homes. Lantana’s winter design temps in the low 20s mean a properly sized heat pump handles heating almost all season, with the auxiliary heat strip only kicking in during rare cold snaps. Since you’re not paying for a gas line, flue, and combustion safety checks, the installed cost is often lower than a dual-fuel setup, and one unit handles both seasons. The trade-off is that the heat strip adds electric load on the coldest nights – we’ll show you that math against your actual electric rate before you decide. Call (361) 306-9515 for a straight comparison on your home.
That’s almost always the defrost cycle doing its job. When outdoor coils ice over on a humid 35°F Lantana morning, the heat pump briefly reverses to melt the frost, and the indoor fan runs at low speed so you don’t feel a blast of cold air. If it lasts more than ten minutes or happens repeatedly, the defrost sensor or board likely needs calibration – a repair that usually falls in the $150 – $650 range. We diagnose this on every heat pump service call in Lantana, and most fixes don’t require a replacement.
SEER2 is the updated federal efficiency metric that measures real-world cooling performance under higher static pressure than the old SEER test. For Lantana, that matters because our humid summer afternoons and long attic duct runs mean your system operates closer to the SEER2 test conditions than the old SEER test. A 16 SEER2 unit will typically deliver lower electric bills than a 14 SEER2 unit of the same tonnage, but the payback depends on your duct condition. We’ll run your numbers and show you the actual bill difference before you spend the extra money.
Repair is usually the right call if the compressor is healthy, the refrigerant circuit is sealed, and the system is under 12 years old. Most heat pump repairs in Lantana run $150 – $650. Replacement makes sense when a compressor fails, the coil is leaking, or the system is oversized and short-cycling – common in Lantana homes where a previous contractor skipped the load calculation. A new standard split system runs $3,500 – $7,500 installed. We’ll show you the repair cost, the replacement cost, and the expected remaining life of your current unit, then let you decide. Estimates are free.
A standard split-system heat pump replacement in Lantana is a one-day job for a two-person crew, assuming the ductwork and electrical panel are in usable shape. If we find duct leakage or need to run a new line set through an unconditioned attic, that can add a second day. We schedule a firm installation date, arrive inside the stated window, and leave the site clean. You’ll get a written startup report showing refrigerant charge, static pressure, and temperature split before we leave.
Need an exact quote for your home? Call Dalton Heating & Air at (361) 306-9515. We answer live, 24/7, and estimates are free.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Lantana and surrounding communities under The Garrison Standard since 2003.







Before
After
Before
After
Before
After