Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Langhorne
Heat pump installation in Langhorne, PA typically runs $3,500 to $7,500 for a full split system, and most jobs are quoted within 24 hours of a site visit. The quote you get from Dalton Heating & Air is written, fixed, and in your hands before any work starts. We’re not the lowest bid in Bucks County, and we don’t try to be. We show up inside the window, do the load calculation instead of guessing tonnage, and stand behind the install for a full year under the 365-Day Done Right Promise.
If your heat pump died or you’re planning a furnace-to-heat-pump conversion in the Langhorne Borough, Parkland, or the Route 413 corridor, call (361) 306-9515. A live person answers, day or night. Marco Benitez leads our crew, and he’s the one who sets the standard for how a heat pump job gets done in Langhorne.
Key takeaways:
- Full heat pump installs in Langhorne run $3,500 – $7,500, written and fixed before work begins.
- Older Langhorne homes need a load calculation plus a panel and duct review before tonnage is chosen.
- We service Trane, Lennox, Goodman, and Rheem systems and stock parts locally for Langhorne jobs.
- Every install carries a written one-year guarantee. If it’s not right, we come back. That’s not a pitch, it’s the Garrison Code.
Why Dalton Heating & Air Is Langhorne’s Preferred Heat Pump Installation Company
Langhorne homeowners call us for a specific reason: they’ve had a technician quote one number over the phone and show up with a different one at the door. That doesn’t happen with us. Our Heat Pump Installation team puts the price in writing before any work starts, on every job, without exception. Marco Benitez has held the crew to that standard since day one because it’s the only way to run a trade business without burning through the neighborhood’s trust.
We know the housing stock here. The 1950s and 60s split-levels off Maple Avenue, the ranches near the borough line, the colonial additions along Flowers Mill Road – they all have different airflow, different ductwork, different electrical panels. That’s why we don’t quote heat pumps by square footage alone. We look at the duct static pressure, the panel amperage, and the Neshaminy Creek valley’s winter design temperature before we name a tonnage. Sizing a heat pump for a Parkland ranch is not the same as sizing one for a Levittown twin.
Response time to Langhorne is same-day for no-heat calls in winter, and next-day for planned install quotes in most cases. Dispatch runs from our Philadelphia office, but the crews serving Langhorne are local and know the roads. You get a uniformed, background-checked tech who calls before arriving, not a nameless sub.
Geothermal Heat Pump Installation in Langhorne
Geothermal Heat Pump Installation in Langhorne is a different animal from an air-source swap. It uses the constant ground temperature below the Neshaminy Creek valley’s frost line, somewhere in the 50-degree range, to move heat instead of burning it. The job involves drilling or trenching a ground loop, running a water-to-refrigerant heat exchanger, and tying it into your existing ductwork or a new hydronic setup. In Langhorne, this matters for the older homes where winter design temps run colder than Lower Southampton and a standard air-source heat pump’s efficiency drops right when the electric backup strips kick on.
What it costs in Langhorne: a geothermal install is a major capital job, and the honest range we quote for most residential ground-loop systems in this area is $3,500 – $7,500 is not accurate for geothermal, so we won’t insult you with a fake number. The realistic ballpark for a vertical loop geothermal retrofit in Bucks County runs well above that. What we will tell you, before we ever take a deposit, is whether your lot can actually support a horizontal loop (most Langhorne Borough lots can’t, the lots are too tight) or whether you’re looking at a vertical bore. That single fact changes the cost more than anything else.
How the ground loop works
The loop circulates an antifreeze-water mix through buried piping. In winter, it absorbs ground heat and carries it to the heat pump inside. In summer, the process reverses. The ground is the heat source or sink, not the air. No outdoor condenser fan, no defrost cycles, no fins clogged with maple seeds from the trees along Route 413.
Why Langhorne lots decide the loop type
Many Langhorne Borough properties sit on small, deep lots with mature trees and buried utilities. That often rules out horizontal trenching and pushes the job toward a vertical bore, which requires drilling equipment and a different permit path. Before quoting geothermal, we walk the lot with you. If the access is too tight for a drill rig, we’ll tell you that day, not after you’ve paid for engineering drawings.
Ductless Heat Pump Installation in Langhorne
Ductless Heat Pump Installation in Langhorne is, for a lot of the older homes here, the more honest answer than forcing a full ducted system onto ductwork that was never designed for a heat pump. A ductless mini split mounts a small indoor air handler on a wall or ceiling and connects to an outdoor condenser through a three-inch line set. No ductwork means none of the static pressure problems that plague the 1950s ranches off Maple Avenue and the split-levels along the Route 413 corridor.
Cost for a single-zone ductless install in Langhorne falls in the $3,500 – $7,500 range. Multi-zone systems go up from there. The price includes the outdoor unit, indoor head, line set, a dedicated electrical circuit, and the programming of the remote or thermostat. We quote it in writing before any work begins, same as every other job.
Ideal for homes without ductwork
Houses with radiant heat, hydronic baseboard, or original gravity duct systems get the most out of ductless. You can heat and cool individual rooms without tearing open walls to run ducts. In Langhorne, the 100-amp panels in pre-1970 homes still need a dedicated breaker for the outdoor unit, and we check that before we quote.
Cold climate performance
A modern cold-climate mini split holds its heating capacity down into single digits. That matters in the Neshaminy Creek valley, where winter nights run colder than the rest of the township. We recommend a unit rated for cold-climate operation if the ductless head is serving a primary living space, not just a finished basement or addition.
Trusted Brands We Service in Langhorne
We’re factory-trained to service and install nine major residential HVAC brands, and in Langhorne we stock parts locally for Trane, Lennox, Goodman, and Rheem systems. That means when a Langhorne homeowner needs a capacitor, a defrost board, or a refrigerant charge on a Friday afternoon, we’re not waiting on a parts house in Trenton. Marco Benitez keeps the van stock localized so the repair happens same-day, not “early next week.” If you’re replacing a 15-year-old Carrier condenser like the one that failed off Route 413, we’ll quote the replacement in writing and have the equipment ordered before we leave your driveway.
We don’t push one brand. We look at your ductwork, your panel, your load calculation, and your budget. Then we recommend the heat pump that fits. Sometimes that’s a Goodman for a budget-sensitive rental. Sometimes it’s a Lennox cold-climate unit for a forever home in Parkland. You get the truth, not a brand loyalty pitch.
Common Heat Pump Installation Problems We See in Langhorne Homes
- Oversized heat pumps short-cycling in narrow 1950s ranches. When a contractor guesses tonnage instead of running a load calculation, the unit cools or heats the space too fast, shuts off, and starts again minutes later. That short-cycling frosts the condenser coil on mild spring days and burns out compressors years early. We see this most often in the borough and along Route 413 where the original ranches still stand.
- High static pressure from ductwork sized for a furnace, not a heat pump. Original duct runs in Langhorne Borough homes were designed for 10 SEER furnace airflow. A modern heat pump wants different static pressure. When it doesn’t get it, the evaporator coil starves and the real efficiency lands well below the SEER2 number on the box. We measure static pressure before we quote, not after the install fails an inspection.
- 100-amp panels that can’t feed the electric backup strips. Most pre-1970 Langhorne homes run on 100-amp service. That’s borderline for a standard heat pump because the electric resistance backup strips draw serious amperage on the coldest Neshaminy Valley nights. If the panel can’t handle it, the install stops mid-job and you’re paying for a panel upgrade you didn’t plan for. We check the panel amperage on the first visit.
- Improper refrigerant charge from a rushed install. A heat pump that’s overcharged or undercharged won’t hit its rated capacity or efficiency. We saw this on a recent job near the borough line where the previous installer never adjusted the charge after the line set was run. The homeowner’s January electric bill told the story. We correct charge to manufacturer spec, not to “close enough.”
Pricing for Heat Pump Installation in Langhorne, PA
Here’s the honest money on Heat Pump Installation in Langhorne. A full split system replacement runs $3,500 – $7,500 depending on tonnage, SEER2 rating, and whether the existing ductwork is usable. A single-zone ductless mini split lands in the same $3,500 – $7,500 range. A pre-install tune-up and system inspection costs $80 – $200. If your existing heat pump needs a capacitor, refrigerant charge, or blower motor repair before you decide on replacement, that runs $150 – $680.
| Service | Price Range in Langhorne |
|---|---|
| Heat Pump Installation (full system, standard split) | $3,500 – $7,500 |
| Ductless Heat Pump Installation (single-zone mini split) | $3,500 – $7,500 |
| Tune-Up / pre-install system inspection | $80 – $200 |
| Heat Pump Repair (capacitor, refrigerant charge, blower motor) | $150 – $650 |
What moves the price: whether you need a panel upgrade for the electric backup strips, whether the ductwork is salvageable or needs to be sealed and modified, and whether you’re going standard efficiency or cold-climate rated. We quote all of it in writing before any work starts. Call (361) 306-9515 for a free estimate.
We Also Serve Cities Near Langhorne
Our crews handle heat pump installation in Langhorne and the surrounding Bucks County towns. If you’re in Fairless Hills, Morrisville, Levittown, or Bristol, the same written pricing, load calculation standard, and one-year guarantee apply. Dispatch runs from our Philadelphia office, but the techs live and work in this area.
Serving Langhorne, PA - Our Local Coverage Area
We’re based in the Langhorne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Langhorne
Yes, a properly sized cold-climate heat pump handles a Langhorne winter. The Neshaminy Creek valley runs colder than surrounding townships, so you need a unit rated for cold-climate operation, not a standard southern-market heat pump. For homes converting from a furnace, we typically recommend keeping the gas furnace as the backup heat source instead of electric strips, because the existing ductwork and gas line are already there. If you’re replacing an old heat pump, the new cold-climate units hold capacity down to single digits and defrost on their own without backup assistance in most Langhorne conditions. Call (361) 306-9515 and we’ll run the winter design temp for your specific neighborhood before we quote anything.
Because guessing tonnage is how Langhorne homes end up with short-cycling systems that burn out compressors early. A load calculation measures the actual heating and cooling demand of your specific house: square footage, window orientation, ceiling height, insulation levels, and the local design temperature. Langhorne’s 1950s and 60s ranches often have less insulation than the square footage suggests, so a load calc can return a smaller or different tonnage than a rule-of-thumb quote would. Any installer who quotes a heat pump by square footage alone is guessing. We don’t guess. Call (361) 306-9515 for a quote that starts with the math, not a number pulled from a chart.
For a Langhorne home, look for a SEER2 of 16 or higher if you’re replacing a unit that was installed before 2015. SEER2 is the updated efficiency rating that better reflects real-world ductwork and static pressure conditions. But the SEER2 sticker number only matters if the ductwork is sized right and the charge is correct. We’ve replaced heat pumps in Langhorne Borough where the old unit’s real efficiency was 20% below its rating because the duct static was too high. Get the ductwork checked before you pay a premium for a high SEER2 number. Call (361) 306-9515 and we’ll measure your static pressure during the quote.
Most pre-1970 Langhorne homes have 100-amp panels, and that’s tight for a standard heat pump with electric backup strips. The backup strips alone can pull 60 amps on the coldest Neshaminy Valley nights. We check the panel amperage on the first visit and tell you the truth: some 100-amp panels can support a small heat pump with a cold-climate design that rarely runs the strips, but many can’t. If the panel needs an upgrade, we tell you before the install, not when the power trips on the first 20-degree morning. Call (361) 306-9515 for a panel and load assessment.
For many Langhorne homes, yes. The older ranches and split-levels off Route 413 and Maple Avenue have ductwork sized for a furnace, not a heat pump. Running a full heat pump system through undersized ducts drags the real efficiency way down. A ductless mini split eliminates that problem entirely because it doesn’t use ducts. If you’re heating and cooling one or two primary rooms, a ductless system usually beats a full ducted replacement. If you have a newer home with properly sized ductwork, a full system makes more sense. Call (361) 306-9515 and we’ll tell you which one is right for your specific house before we ever quote a price.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Langhorne and surrounding Bucks County communities.