Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Heat Pump Installation Across Hockinson
A new heat pump installation in Hockinson typically runs $3,500 to $7,500 depending on the size of your home, the condition of your existing ductwork, and the efficiency rating you choose. That’s the range we quote most often for homes in Hockinson, and we put that number in writing before any work starts. If you’re dealing with a failed system, call us at (361) 306-9515 and a real person answers, day or night.
Hockinson’s rural lots, well-and-septic households, and older ranch-style housing stock create installation variables that a city crew never sees. Sizing a heat pump here isn’t a square-footage guess. It’s a measured calculation that accounts for additions, vaulted ceilings, pier-and-beam floors, and the electrical draw from your well pump and septic blower. Skip those, and you get a system that never holds temperature or never stops running.
Our Heat Pump Installation team works in Hockinson every week, from the properties off NE 182nd Ave down to the acreages south of NE 199th St. We know the housing stock, we know the PUD rates, and we know what fails here. That’s the difference between a quote that fits your home and one that fits a spreadsheet.
Why Dalton Heating & Air Is Hockinson’s Preferred Heat Pump Installation Company
Dalton Heating & Air is a Garrison Partners company, held to The Garrison Standard on every job since 2003. What that means in Hockinson: the price is in writing before any work begins, the technician arrives inside the stated window, and the install is guaranteed in writing for a full year. If something’s not done right, we make it right under the 365-Day Done Right Promise. No fine print, no callback runaround.
Hockinson homeowners who call us get a background-checked, uniformed technician who knows the difference between a tightly sealed 1980s ranch and a drafty split-level with a vaulted great room. Our crews service nine major residential HVAC brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That breadth matters in Hockinson, where we see a mix of brands installed across decades of home construction.
Scheduling and dispatch are coordinated from our Seattle office, and crews serve Hockinson locally. Marco Benitez leads the Dalton team, and the operating rules are non-negotiable under The Garrison Code: show up in the window, put the price in writing, do the job by the book, leave the property clean, and stand behind the work for a full year. A live person answers every call, 24/7, so you’re never leaving a voicemail when your heat won’t start on a 20-degree morning.
Ductless Heat Pump Installation in Hockinson
Ductless Heat Pump Installation in Hockinson is often the right answer for homes with no existing ductwork, homes with additions, or rooms that never seem to hold temperature. We commonly install ductless mini-split systems in Hockinson’s older ranches and converted garages, where running new ducts would mean tearing into finished walls or abandoning useful space. A ductless system pairs an outdoor condenser with one or more indoor air handlers, each controlled independently.
For a Hockinson homeowner with a poorly insulated addition or a bonus room over the garage, a ductless heat pump installation typically falls within the $3,500 to $7,500 range depending on the number of indoor heads and the heating load required. The advantage is zoning: you heat and cool only the rooms you use, which matters when your electrical panel is already carrying well-pump and septic blower load.
When Ductless Makes Sense in Hockinson
Homes with pier-and-beam foundations and original 1970s-80s ductwork often lose a quarter of their conditioned air before it reaches the register. Rather than fight that, we install ductless heads in the main living areas and let the existing central system handle the rest when needed. It’s honest math: sometimes the right fix is not another central unit fighting old ducts.
What We Check Before Quoting Ductless
Before recommending ductless, we verify your panel has room for the circuit, check the wall structure where the indoor head mounts, and size the outdoor unit for the actual room load, not a rule of thumb. Hockinson’s cold snaps demand a cold-climate-rated unit that still produces real heat below freezing, not one that falls back to resistance strips and drives your PUD bill up.
Heat Pump Service in Hockinson
Heat Pump Service in Hockinson covers everything from a system that won’t start to a compressor that short-cycles in mild weather. When a Hockinson homeowner calls us about a heat pump that’s blowing cold air or running constantly, the first thing we do is diagnose the actual fault, not guess at a part. A compressor that short-cycles might need a capacitor, or it might be oversized for the home, a common issue on rural properties sized off square footage alone.
Heat pump repair in Hockinson generally runs $150 to $650 depending on the failed component. A refrigerant leak, a failed defrost board, a weak capacitor, a stuck reversing valve: each has a specific fix and a specific price, and you see that price in writing before we turn a wrench. If the repair doesn’t hold, we return at no charge. That’s the free second visit, and it’s part of every repair we do in Hockinson, not an add-on you negotiate for.
Seasonal Failures We See Often
In fall and early winter, we get calls from Hockinson residents whose heat pumps ran all summer cooling but now won’t switch to heat. That’s usually a reversing valve or a defrost sensor. In spring, it’s the opposite: a unit stuck in heating that won’t cool. Either way, we diagnose first, quote second, and fix third.
When Repair Stops Being Worth It
A heat pump that needs a refrigerant recharge in Hockinson after a compressor burnout is sometimes better replaced. Refrigerant recharge, topping off the cooling fluid your system needs to reach set temperature, only makes sense if the underlying leak is found and sealed. If we’re looking at a 15-year-old R-22 unit with a failing compressor, the honest recommendation is often replacement, and we’ll walk you through the math on your electric bill before you spend another dollar on repair.
Trusted Brands We Service in Hockinson
We install and service Goodman, Rheem, York, and Daikin heat pumps in Hockinson, and our techs are factory-trained across nine major residential brands. That means we’re not tied to one manufacturer’s lineup and we’re not going to sell you a unit that doesn’t fit your home. We keep common parts stocked for faster turnaround on Hockinson service calls, and when a part isn’t on the truck, our dispatch team coordinates delivery so you’re not waiting through a cold snap. The brand matters less than the sizing, the installation, and the static pressure. That’s what we focus on.
Common Heat Pump Installation Problems We See in Hockinson Homes
- Oversized units from square-footage guessing. Hockinson’s rural ranch-style homes, many with additions, vaulted great rooms, and pier-and-beam floors, get oversized heat pumps when contractors size off square footage alone. The result is a compressor that cycles constantly in mild shoulder seasons, wears out early, and never dehumidifies properly.
- Well-and-septic loads ignored in the load calculation. A manual J load calc for a Hockinson home must account for well-pump and septic blower draw, or the heat pump gets under-sized and the thermostat gets mis-set to lean on auxiliary heat strips during cold snaps. That’s a guaranteed high electric bill.
- Original 1970s-80s ductwork choking new high-SEER2 systems. Rural Hockinson homes often have original ductwork with high static pressure that a variable-speed blower has to fight against. If we don’t evaluate the ducts before the install, that new high-efficiency system burns out the blower motor prematurely.
- No load calculation done at all. We see it regularly. A homeowner gets a quote that’s just a price and a tonnage guess. Then the system never holds setpoint through a Hockinson cold snap. We run the load calculation every time, and you can see the numbers.
Pricing for Heat Pump Installation in Hockinson, WA
Here’s what heat pump work actually costs in Hockinson, based on the jobs we’re quoting and completing in this area right now:
| Service | Typical Cost in Hockinson |
|---|---|
| Heat Pump Installation (central or ductless) | $3,500 – $7,500 |
| AC / Heat Pump Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| Preventive Tune-Up (heat pump or AC) | $80 – $200 |
What moves a Hockinson install toward the top of that range: cold-climate-rated equipment, a larger home, multi-zone ductless heads, or significant duct sealing and modification. What moves it down: a smaller well-insulated home, a straightforward swap of an existing system, or a single-head ductless install. Every quote is written and fixed before any work starts, and a free estimate is exactly that: free, with no obligation.
Call (361) 306-9515 to get a real number for your Hockinson home. Not a range from a website, not a price that changes at the door. A written price.
We Also Serve Cities Near Hockinson
Dalton Heating & Air provides Heat Pump Installation in Hockinson and also serves nearby communities including Seattle, Spokane, Tacoma, and Vancouver. If you’re in a neighboring town and need heat pump work, the same Garrison Standard applies: written pricing, on-time arrival, and a full-year written guarantee on every install.
Serving Hockinson, WA - Our Local Coverage Area
We’re based in the Hockinson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Hockinson
Yes, in most Hockinson homes a correctly sized and installed heat pump will cost less to run than electric resistance heat, because Clark Public Utilities’ service territory reaches Hockinson with some of the lowest electric rates in Washington state. A heat pump moves heat rather than generating it, typically delivering two to three times the heat per kilowatt-hour compared to baseboard or strip heat. The savings compound when the unit is sized to your actual load, not a square-footage guess. Call (361) 306-9515 and we’ll show you the operating cost math for your home before you decide.
You can, but only if the ducts are evaluated before the install. Original Hockinson ductwork often has high static pressure that chokes a variable-speed blower, which means a brand-new high-SEER2 system might never deliver its rated efficiency. We inspect the ducts, seal what’s leaking, and in some cases recommend a ductless system instead of fighting old ductwork. It’s the right answer for your specific house, not a one-size-fits-all brand pitch.
If the unit is under 12 years old and the failed part is a capacitor, contactor, or defrost sensor, repair usually makes sense and costs $150 to $650. If it’s a 15-plus-year-old unit with a refrigerant leak or a compressor failure, replacement often pencils out better once you factor in the operating savings of a modern system. We give you the repair price and the replacement price in writing, and we’ll explain what each means for your PUD bill. The decision is yours, but you’ll have real numbers to work with.
SEER2 is the efficiency rating tested under new, more realistic conditions that better reflect actual ductwork and static pressure. A higher SEER2 rating means lower operating cost per cooling season, but only if the install is done right: correct sizing, sealed ducts, and proper refrigerant charge. A high-SEER2 unit installed on undersized ducts or with the wrong refrigerant charge won’t deliver its rated efficiency. That’s why we run the load calculation and static pressure test on every Hockinson install.
Yes, we install ductless mini splits throughout Hockinson, and they make more sense when you have no existing ductwork, an addition that your central system can’t reach, or original ducts that would need extensive and costly modification. Ductless also gives you per-room control, which matters in rural homes where you’re not heating empty bedrooms all day. A ductless install typically falls in the same $3,500 to $7,500 range, depending on the number of indoor heads. Call (361) 306-9515 for a free estimate with the load calculation included.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Hockinson since 2003.







Before
After
Before
After
Before
After