Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Conley
Heat pump installation in Conley, GA typically runs between $3,500 and $7,500 for a full system, depending on the size of your home and the condition of your existing ductwork. Most installs we do in Conley take one full day, sometimes two if we’re replacing duct sections or moving the air handler. Our crews know Conley’s neighborhoods well – we work off Bouldercrest Road, down around Conley Road, and throughout the side streets off Moreland Avenue every week. Call Dalton Heating & Air at (361) 306-9515 for a written quote before any work begins.
What makes a Conley install different from one a few miles north is the soil. Conley sits on some of the redder, sandier-clay soils in Clayton County, and the older slab-on-grade homes here shift enough that return-air leaks and duct static pressure problems show up more often than they do in Forest Park or Morrow. That means a Manual J load calculation and a duct-pressure test are not an upsell on this side of the county – they’re the difference between a heat pump that hits its rated efficiency and one that never does. We run both on every install quote, in writing, before you spend a dollar.
When you call, a real person answers. Not a voicemail queue, not a callback service. We’ll get you scheduled, tell you exactly who’s coming, and that technician will arrive inside the stated window. The price you’re quoted is the price you pay – no renegotiation at the door, no “found something else while we were in there” surprise. That’s The Garrison Standard, and it’s been the rule since 2003.
Why Dalton Heating & Air Is Conley’s Preferred Heat Pump Installation Company
Marco Benitez leads our installation work across Clayton County, and he’s built a crew that treats a Conley job like it’s their own house. Homeowners around Conley Road and the neighborhoods off Conley know our trucks, and they know our techs show up wearing uniforms, carrying ID, and ready to explain what they’re doing in plain English. We don’t send subcontractors. The person you meet at the door is a Dalton employee, background-checked and factory-trained.
Response time to Conley runs fast because we’re not routing from across the metro. Dispatch and scheduling are coordinated from the brand’s Atlanta office, but crews serve Conley locally, so we’re usually on-site within the same day for install quotes and within hours for no-heat calls during cold snaps. That matters here. Conley’s housing stock is older, much of it built on slab, and when a heat pump quits in January or overloads in July, you’re not in a position to wait three days for a quote.
We also stand behind the work in writing for a full year. It’s called the 365-Day Done Right Promise. If something we installed isn’t right, we come back and make it right, at no charge. Not a 30-day window. A full year. That’s not a promotion – it’s how every Dalton job has worked since the company was founded as a Garrison Partners operation in 2003.
Ductless Heat Pump Installation in Conley
Ductless heat pump installation in Conley is the right call for homes where the existing ductwork is leaking badly or was never sized correctly in the first place – which we see a lot in the older slab-on-grade houses near Conley Road and Bouldercrest. Instead of forcing air through failing ducts, a ductless system puts the heating and cooling directly in the room. No duct static pressure problem, no return-air leaks, no fighting the house’s framing. For Conley homes with no existing ducts, or with ducts that have been chewed up by years of shifting soil, ductless is often the smartest dollar-for-dollar spend.
When Ductless Makes Sense
If your Conley home has window units in the summer and space heaters in the winter, a ductless heat pump replaces both with one system you actually control by room. If your ductwork runs through an unconditioned crawlspace or attic and you’ve already patched leaks twice, you’re likely paying to heat and cool the outdoors. Ductless eliminates that entirely. It’s not the cheapest option up front – expect to budget in the range of a full system install, often $3,500 to $7,500 depending on the number of indoor heads – but it’s the cleanest fix when ducts are the problem.
The Install Itself
We mount the indoor heads on exterior walls, run refrigerant lines and drain lines through a small opening, and set the outdoor unit on a pad or wall bracket. Most Conley ductless installs take one day for one or two zones. We still run a load calculation first. Ductless doesn’t get a pass on sizing – an oversized mini split short-cycles just like an oversized central unit, and in Conley’s humid summers, short-cycling means you feel clammy even when the air is cool.
Heat Pump Service in Conley
Heat pump service in Conley covers everything from annual tune-ups to emergency repairs when your system quits on the hottest day of the year or the first night below freezing. Most repair calls we run in Conley fall between $150 and $650, depending on what’s failed. A run capacitor for the condenser fan is a $150 to $250 fix. A refrigerant charge after finding and sealing a leak runs higher. A blower motor or defrost control board lands in the $300 to $600 range. Every repair gets a written guarantee for a full year, and if it fails in that time, we return at no charge.
The Tune-Up We Actually Do
A tune-up in Conley runs $80 to $200 and it is not a 12-point “inspection” where the tech spends ten minutes looking at the unit and hands you a sticker. We calibrate the thermostat, clean the condenser and evaporator coils, check the refrigerant charge, test the capacitors, measure temperature split, and inspect the electrical connections and drain line. You get a written report of what we found, what’s working, and what’s wearing. Our technicians are not paid on what they sell, so there’s no invented upsell at the end of the visit.
No-Heat and No-Cooling Calls
When a Conley heat pump stops heating in cold weather or stops cooling during a Clayton County summer stretch, that’s a health and safety problem, not an inconvenience. We treat it that way. Calls are answered by a live person 24/7, and we prioritize no-heat and no-cooling calls for same-day service in Conley. If you’re blowing cold air in heating mode or warm air in cooling mode, call (361) 306-9515 and we’ll get a technician to you the same day.
Trusted Brands We Service in Conley
Our technicians are factory-trained to work on nine major residential HVAC brands, and across Conley we most often see and install Carrier, Rheem, York, Daikin, and Bryant systems. That training matters when a manufacturer changes a defrost board design or a refrigerant spec, and it means we’re not learning on your unit. For Conley customers, we keep common parts for these brands stocked locally – capacitors, contactors, defrost controls, fan motors – so a repair doesn’t wait on a parts truck from across the metro. If your existing system is a Trane, Lennox, Goodman, or American Standard, we service those too, and we can give you a straight answer on repair versus replacement whichever brand is on your pad.
Common Heat Pump Installation Problems We See in Conley Homes
- Oversized units from tonnage-matching instead of load calculations. The last contractor looked at the old 4-ton system, quoted a new 4-ton system, and never measured the house. Now the unit short-cycles, Conley’s humidity never really leaves, and the SEER2 rating on the box is a fantasy. We see this weekly.
- Duct static pressure problems on older slab homes. The shifting clay soil around Conley has cracked and pulled older duct runs apart. A new heat pump can’t breathe through a leaking, undersized return, and the homeowner blames the equipment when the real problem is the ductwork.
- New cold-climate heat pumps dropped onto old electrical panels. A modern inverter heat pump can draw more at startup than the existing breaker and wiring were rated for. Skip that check and you’ll find out during the first hard freeze. We verify panel capacity and refrigerant line sizing before quoting, not after the install is half done.
- Return-air leaks pulling attic or crawlspace air. In Conley’s older homes, a disconnected return boot lets the system suck in 140-degree attic air in July or 40-degree crawlspace air in January. The heat pump works twice as hard and still can’t keep up. We pressure-test the return as part of every install scope.
Pricing for Heat Pump Installation in Conley, GA
Here’s what we charge for heat pump work in Conley, in writing, before any work starts. These are the same ranges our Conley customers saw last month and the month before.
| Service | Price Range |
|---|---|
| AC Repair (incl. capacitor test/replace, refrigerant charge) | $150 – $650 |
| Furnace Repair (heat exchanger, blower motor) | $150 – $700 |
| Heat Pump / AC Installation (full system) | $3,500 – $7,500 |
| Tune-Up (thermostat calibration, coil clean, charge check) | $80 – $200 |
A full heat pump install in Conley lands on the lower end of that range when the ductwork is in good shape, the electrical panel doesn’t need work, and the existing refrigerant lines are reusable. It climbs toward the top when we’re fixing duct leaks, replacing a return, upgrading a breaker, or converting from a furnace-only setup. The free estimate we give you is a fixed written number, not a range. We don’t re-price it at the door. Call (361) 306-9515 and we’ll put the number in front of you before you commit to anything.
We Also Serve Cities Near Conley
Our Heat Pump Installation team covers Conley and the surrounding Clayton County communities, including Forest Park, Morrow, Riverdale, and Jonesboro. If you’re right on the Conley line, don’t overthink which town you’re in. Call us and we’ll get you scheduled. The same written pricing, the same one-year guarantee, the same crew.
Serving Conley, GA - Our Local Coverage Area
We’re based in the Conley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Conley
The repair-versus-replace line is math, not guesswork. If the repair is under half the cost of a new system and the unit is under 10 to 12 years old, repair usually wins – especially in Conley where the cooling season is long and a well-maintained heat pump can run 15 years. If the compressor has failed, the refrigerant is R-22, or the ductwork needs major work anyway, replacement is usually the smarter spend. We’ll show you both numbers in writing and give you a straight recommendation, not a sales pitch. Call (361) 306-9515 for the real figures on your specific unit.
Because Conley’s red sandy-clay soil shifts older slab-on-grade homes, and that shifting changes how your house actually performs – it’s not a theoretical concern here. A Manual J load calculation measures the real heating and cooling load of your house, not the tonnage of whatever was installed in 1998. Skip it and you end up with an oversized unit that short-cycles and never dehumidifies properly, or an undersized unit that can’t hold temperature. We run the calculation on every install. It’s non-negotiable.
For Conley’s climate, aim for a SEER2 of 15 or higher on a central heat pump, and 17 or higher if you’re running cooling for six-plus months a year. The higher rating costs more up front, but in a humid Clayton County summer, the efficiency difference is real on your bill. One field note: on a heat pump install off Conley Road, we dropped a short-cycling 3-ton system to a correctly sized 2.5-ton Carrier heat pump, resealed the return, and set the charge by subcooling – the homeowner’s July bill dropped by more than a third. The load calculation did that, not a bigger unit.
In cooling mode, yes – warm air in July means the system is not doing its job and the indoor temperature is climbing. Call us immediately at (361) 306-9515. If it’s winter and the system is in defrost mode, warm air for a few minutes is normal as the unit clears ice from the outdoor coil. But if it stays warm, or you hear a grinding sound, or the outdoor unit is a block of ice and won’t defrost, that’s a no-heat emergency and we’ll treat it as one with same-day service in Conley.
Yes, we install ductless mini split heat pumps throughout Conley, and yes – the load calculation is still required. Ductless doesn’t get a sizing pass. An oversized ductless unit short-cycles just like an oversized central system, and because Conley’s summers are humid, short-cycling means you feel damp even when the room is cool. We calculate the load for each zone, size the indoor heads accordingly, and give you a written fixed price before we start. For an exact quote on your home, call (361) 306-9515 – the estimate is free.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Conley since 2003.