Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Heat Pump Installation Across Calabasas
Heat pump installation in Calabasas typically runs $3,500 – $7,500 for a full system, and the job almost always involves more than swapping a box. Calabasas sits in a high-fire-severity zone, which means Title 24 duct sealing and clearance requirements can change what equipment you’re allowed to install and how the permit gets closed out. We know those requirements cold, because we work them every week from Mulwood up to Calabasas Highlands. Call (361) 306-9515 and we’ll put a written price in front of you before any work starts.
Why Dalton Heating & Air Is Calabasas’s Preferred Heat Pump Installation Company
Homeowners in Calabasas tend to ask sharper questions than most. They’ve usually had at least one crew quote a tonnage over the phone without ever looking at the ductwork, and they know what that leads to. Our Heat Pump Installation team performs a load calculation before recommending equipment size, every time. No guesswork on tonnage, no “your old 3-ton was fine so we’ll just match it.” The Garrison Standard, which has governed every Dalton job since 2003, requires the price in writing before work begins and a written guarantee on every repair for a full year. If the work fails inside that year, we return at no charge.
Marco Benitez runs our Calabasas crews. He’s the person who insists on duct assessments before equipment selection, because he’s seen what a high-static duct system does to a new heat pump’s efficiency and lifespan. Every technician who shows up at a Calabasas door is background-checked, uniformed, and factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. You’ll know who’s coming before they arrive, and the office answers the phone with a live person 24/7. No voicemail queue at 2 a.m. when a canyon house loses heat in December.
Heat Pump Service in Calabasas
Heat Pump Service in Calabasas covers the repair and maintenance side of a system that works year-round, not just during a heat wave. A heat pump is both your air conditioner and your furnace. When the cooling side acts up, a repair in Calabasas typically lands between $150 and $650. When the heating side fails, expect $150 to $700 depending on the part. A pre-season tune-up runs $80 to $200, and we write down exactly what we found, what we fixed, and what the pressures and temperatures read before and after.
Pre-Season Tune-Up Detail
We check refrigerant charge against superheat and subcooling targets, not by feel. A system that’s even 15% low on charge loses efficiency and shortens compressor life, which matters on Calabasas afternoons when temps routinely climb past 100°F. We also test capacitors, contactors, defrost controls, and the reversing valve operation so you don’t discover a dead heat strip on the first cold morning in January.
Repair Diagnostics We Run
We measure static pressure and duct leakage. High static is the most common reason a Calabasas heat pump underperforms its SEER2 rating. A duct system pushing above 0.5 in. w.c. wastes the efficiency you paid for and overworks the blower motor. If we find that, we tell you plainly what it costs to correct it and what happens if you don’t.
Heat Pump Replacement in Calabasas
Heat Pump Replacement in Calabasas isn’t just about a new outdoor unit. It’s about whether your ductwork, your electrical panel, and your Title 24 compliance can support the equipment you actually need. A full replacement, done properly, lands between $3,500 and $7,500 in this market. The spread depends on tonnage, efficiency rating, and how much duct correction the load calculation uncovers. In Calabasas Highlands and along the canyon roads off Las Virgenes, we regularly find duct leakage above 20%, which kills efficiency no matter what SEER2 number is printed on the box.
When Replacement Makes More Sense Than Repair
Marco’s rule is simple: if a compressor has failed on a system older than 12 years, or the repair total approaches 40% of replacement cost, you’re usually better off replacing. Especially in Calabasas, where a new installation lets you satisfy current Title 24 duct sealing requirements in writing. A repaired older system stays grandfathered, but it’s still leaking air and running at a fraction of its rated output.
What a Proper Replacement Includes
We don’t just set the condenser and leave. The job includes a Manual J load calculation, duct assessment, line-set evaluation, condensate drain inspection, and a final refrigerant charge dialed to manufacturer spec. We document the static pressure before and after. When the permit closes, you get the paperwork for the Title 24 compliance your insurance may ask about.
Trusted Brands We Service in Calabasas
We’re factory-trained on nine major residential brands, and in Calabasas we install and service Goodman, Rheem, York, and Daikin regularly. Each has strengths at different price points and noise levels. Daikin tends to be quiet and handles canyon elevation well. Goodman delivers solid value for straightforward replacements in Calabasas Park. Rheem and York both have strong inverter options for homes that want consistent temperatures without constant cycling. Since we stock common parts locally and coordinate dispatch from our Los Angeles office, turnaround on warranty parts for Calabasas customers is faster than waiting on out-of-state suppliers.
Common Heat Pump Installation Problems We See in Calabasas Homes
- Outdoor unit swapped without a load calculation. We see contractors drop in a new condenser and reuse the old evaporator coil and undersized ductwork. The new heat pump fights the airflow, the static pressure climbs, and the compressor fails years early. This is the most preventable mistake in Calabasas canyon homes.
- Refrigerant charge tuned by feel instead of measurements. “Beer-can cold” is not a charging method. An improper charge masked a failing capacitor on one Calabasas job and cooked the compressor on a 100°F afternoon. We charge to superheat and subcooling targets, with the numbers on the work order.
- SEER2 quoted without addressing duct leakage. A 17 SEER2 heat pump on a leaking duct system performs closer to 12 SEER2. Older homes in Calabasas Highlands and Mulwood often have duct leakage and high static that no efficiency sticker can overcome until the ducts are sealed.
- Title 24 documentation left incomplete. Calabasas sits in a high-fire-severity zone, so duct sealing and clearance requirements get enforced at permit closeout. If the installer didn’t do the testing, you’re stuck with an open permit and a system that may fail re-inspection.
Pricing for Heat Pump Installation in Calabasas, CA
Here’s what honest market pricing looks like in Calabasas right now. These are the ranges we quote, and they match what you’ll find from any reputable local contractor. What changes the number is the condition of your ductwork, the access to your equipment pad, and the efficiency level you choose.
| Service | Calabasas Price Range |
|---|---|
| AC Repair (heat pump cooling side) | $150 – $650 |
| Furnace Repair (heat pump heating side) | $150 – $700 |
| Heat Pump Installation / Replacement | $3,500 – $7,500 |
| Pre-Season Tune-Up | $80 – $200 |
We give you a written price before work begins, and that price doesn’t move. You’ll know the total before anyone touches a tool. Estimates are free. Call (361) 306-9515 and Marco or one of our senior techs will walk the property, run the load calculation, and hand you a fixed number the same day.
We Also Serve Cities Near Calabasas
Beyond Calabasas, we take heat pump work in Topanga, Agoura Hills, Oak Park, and Westlake Village. The same load calculation discipline and written-pricing standard applies everywhere we go. If you’re searching for Heat Pump Installation in Calabasas and live a few miles out, we’re already working your neighborhood.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Calabasas
Repair makes sense if the system is under 10 years old and the failing part is a capacitor, contactor, or defrost control, which runs $150 – $650 on the cooling side or $150 – $700 on the heating side. Replace when the compressor has failed, the system is past 12 years, or a load calculation shows your ductwork is too far out of spec to make a repair worthwhile. In Calabasas, where Title 24 duct sealing applies to new installs, replacement also gives you a documented improvement you can show an insurer. Call (361) 306-9515 and we’ll give you a straight answer with a written price either way.
A load calculation tells you what tonnage your house actually needs based on square footage, window area, insulation, and orientation. It frequently changes the equipment size, which changes the price and the performance. We’ve seen Calabasas Highlands homes where a 2-ton was undersized and needed a 2.5-ton after the numbers came back. Skipping this step means you pay for equipment that’s either too small or too big, and both fail early.
A full heat pump installation in Calabasas runs $3,500 – $7,500 depending on tonnage, SEER2 rating, and duct correction. A straight swap on a newer Calabasas Park home with sealed ducts lands at the lower end. An older canyon home needing duct sealing, a transition rebuild, and high-efficiency inverter equipment lands at the upper end. Every quote is written and fixed before work starts, and estimates are free. Call (361) 306-9515 for an exact number.
In Calabasas, 15 – 17 SEER2 is the practical sweet spot for most homes. Higher ratings cost more and only pay off if your ducts are sealed and static pressure is low. If we measure duct leakage above 15%, fixing that moves your real-world efficiency more than jumping from 16 to 19 SEER2. We’ll show you the payback math on the actual system in your house, not a showroom sheet.
Yes, and we often recommend it. A tune-up runs $80 – $200 and gives us a full diagnostic picture: refrigerant charge, static pressure, duct leakage, and component health. That data tells us whether repair is worth it or replacement is the better money. You get a written report either way. Call (361) 306-9515 to schedule, and a live person will answer.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Calabasas since 2003.