Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Grandview, TX
Dalton Heating & Air is the HVAC company Grandview homeowners call when the system quits and the forecast says 98 degrees, or when a furnace dies the same week the first hard freeze rolls in. We run on The Garrison Standard: a written price before any work begins, a crew that arrives inside the stated window, and a full-year written guarantee on every repair. That means no surprises on the invoice and no chasing down a tech who left the job half done. Need someone now? Call (361) 306-9515.
Why Grandview Homes Are Different
Grandview sits on the edge of Johnson County where the prairie opens up and the wind doesn’t quit. Homes here run from turn-of-the-century farmhouses with pier-and-beam foundations to 1970s brick ranches and a growing number of newer builds on acreage lots. The older stock, especially along FM 916 and County Road 401, was never sized for a modern heat pump. Ductwork in those homes is often undersized or patched together from decades of add-ons, which means airflow problems show up as hot rooms in summer and cold spots in winter long before the equipment itself fails.
The soil matters too. Johnson County clay expands and contracts through every wet-dry cycle, and that movement gets into the ductwork under slab foundations. We see cracked duct boots and separated plenum connections more often in Grandview than almost anywhere in our service footprint. Add the dust that blows in off the open pasture and you get coils that clog faster than they would in town. A tune-up here isn’t a formality; it’s the thing that keeps an older unit alive through August.
Most Grandview work is outside city limits, which means no local permitting office and no inspector standing over the job. That’s a double-edged thing. It keeps projects moving fast, but it also means nobody is checking the work after we leave except us. Our crews work to the same standard whether an inspector is coming or not.
Our Main Grandview Services
Grandview homeowners call us most about two problems: a system that stopped working and a system that needs to be put in right. Both jobs have their own page with full pricing and local detail.
AC Repair in Grandview
When a Grandview AC goes down in July, the clock is running. Most repair calls we handle here are refrigerant leaks, failed capacitors, and contactors worn out from cycling hard through long seasons. Older R-22 systems are common in this area, and a leak fix plus recharge on those can run toward the higher end of the repair range. We keep common parts for Trane, Goodman, and Rheem units stocked so most Grandview calls are finished the same day. Full breakdown of what repairs cost lives on the AC Repair in Grandview page. The price is in writing before any work starts, every time.
Heat Pump Installation in Grandview
Heat pumps fit Grandview especially well because winter here is mild enough that the unit rarely needs backup heat, and summer demands are handled without the fuel costs of a gas furnace. We size every install with a Manual J load calculation, not a guess from the old equipment’s tonnage. Plenty of Grandview homes were originally built with undersized ductwork, so a proper install often means correcting airflow before the new unit goes in. That’s the difference between a system that lasts fifteen years and one that burns out in ten. See the full scope and pricing on the Heat Pump Installation in Grandview page.
Furnace Repair in Grandview
Grandview runs on a mix of natural gas and propane furnaces, with propane common on acreage lots without a gas line to the house. Igniters, flame sensors, and gas valves are the recurring failures we fix here each fall and winter. A cracked heat exchanger is the serious one, and on an older furnace it usually means replacement rather than repair. We carry parts for Lennox and Goodman furnaces and can have less common boards in hand within a day. Repair costs, guarantees, and what to expect are all on the Furnace Repair in Grandview page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Grandview
Our technicians are factory-trained on the brands Grandview homes actually run: Trane, Lennox, Goodman, and Rheem among them. We keep common capacitors, contactors, igniters, and fan motors stocked for those lines, which is why most calls finish the same day. See the full brand list on home.
Pricing for HVAC Company in Grandview, TX
Here’s what Grandview homeowners can expect to pay. These are the numbers we quote, in writing, before any work begins.
| Service | Typical range in Grandview |
|---|---|
| AC repair (capacitor, contactor, minor electrical) | $150 – $350 |
| AC repair (refrigerant leak repair + recharge) | $350 – $650 |
| Furnace repair (igniter, flame sensor, gas valve) | $150 – $450 |
| Furnace repair (blower motor, control board) | $350 – $700 |
| Heat pump installation (basic system) | $3,500 – $5,500 |
| Heat pump installation (higher-efficiency system) | $5,500 – $7,500 |
| Seasonal tune-up | $80 – $200 |
What pushes a Grandview repair toward the top of those ranges is age. An R-22 system from the early 2000s needs refrigerant that hasn’t been manufactured in years, and the remaining supply costs accordingly. Undersized ductwork also forces systems to work harder, which shortens part life. Whatever the quote comes to, it’s the price you pay. We put it in writing before any work starts, and there’s no add-on at the end.
Neighborhoods We Serve in Grandview
We run calls across the whole Grandview footprint, from in-town streets near the school district to the acreage properties on FM 916, County Road 401, and the roads running south toward the Hill County line. Our local crews cover the area in about 30 minutes for emergencies and schedule planned work through the week.
- Downtown Grandview and the surrounding grid
- Acreage along FM 916
- Properties off County Road 401
- Homes south of town near the Brazos River bottom
- Rural lots along SH 81 toward Cleburne
Service Area – Cities Near Grandview
If you’re a few miles out in any direction, we cover you too. We serve Cleburne, TX to the north, Alvarado, TX to the northeast, Venus, TX to the east, and Keene, TX just up SH 81. Same written pricing, same one-year repair guarantee, same crews.
Serving Grandview, TX - Our Local Coverage Area
We’re based in the Grandview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Grandview
On most days we can have a technician at a Grandview address within about 30 minutes of the call, since our dispatch coordinates from the Dallas-Fort Worth office and we keep scheduled work in this area light during peak season. Call (361) 306-9515 and a live person answers, 24/7.
Most Grandview residential work happens outside city limits where no permit is required. Inside city limits, system replacements may need a permit depending on the scope. Either way, we handle the paperwork that exists and build to the same standard regardless. The written price covers everything.
You’ll get a background-checked, uniformed technician whose name you’ll know before they arrive. We try to keep the same crew on the same Grandview streets, so repeat calls often get a familiar face. Every tech is bound to The Garrison Code: show up inside the window, price in writing before starting, leave the site clean, and stand behind the work for a full year.
If your AC or furnace needs attention in Grandview, call (361) 306-9515 for a free estimate. A live person answers, and the price you hear is the price you’ll see in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grandview Customers Say
"Good communication, tidy, and disciplined work. Taped off the floor and wiped the unit down."
- Karen J."Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B."Tech arrived in uniform right on time. AC wasn't cooling, found a failed capacitor, and replaced it in twenty minutes. The owner is a veteran and the company runs like it."
- Frank O.