Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Gig Harbor, WA
Dalton Heating & Air is the HVAC company Gig Harbor homeowners call when a heat pump quits in February or an AC unit stops cooling during an August heat wave. Our crews work on the kinds of homes this area actually has: 1970s and 80s split-levels along the west side, newer construction above the harbor, and a good share of properties with aging ductwork and undersized electrical panels. If your system is down, call (361) 306-9515 and a real person answers, day or night.
Why Gig Harbor Homes Are Different
Gig Harbor sits right on Puget Sound, and marine air does two things to HVAC equipment that inland homes never deal with. First, the salt-laden breeze accelerates corrosion on outdoor condenser coils, especially on properties within a half mile of the water. Second, that same air pushes humidity into crawlspaces and basements, which means a system that is slightly undersized or low on refrigerant will struggle to pull moisture out of the house, not just cool it. We see this constantly on homes along Rosedale Street NW and down toward the harbor mouth.
Terrain matters here too. Homes up off Peacock Hill and around Artondale sit higher and catch more afternoon sun, so their cooling loads run a little hotter than places tucked into the tree cover near Crescent Valley. Older neighborhoods like the ones north of Skansie Avenue often have original ductwork that was sized for a furnace only, which means a heat pump installation in Gig Harbor frequently involves duct sealing or modification work that a flat, suburban lot would not require. Permits and HOA review are also real factors around the waterfront communities and newer planned developments, and we handle that paperwork as part of the job rather than leaving it on the homeowner’s plate.
Our Main Gig Harbor Services
Most calls to our Gig Harbor customers fall into three categories: air conditioning that will not cool, heat pumps that need replacing, and furnaces that will not light or stay lit.
AC Repair in Gig Harbor
When your AC stops cooling in Gig Harbor, the problem is usually one of three things: a failed capacitor, a refrigerant leak, or a clogged condensate line. In homes near the Sound, we also see salt-corroded contactors causing systems to trip breakers. Our technicians diagnose the fault, put the exact repair price in writing before any work begins, and carry the common parts on the truck so most jobs are finished in one visit. Every repair is guaranteed in writing for a full year. If you are dealing with a warm house, call us at (361) 306-9515 for AC Repair in Gig Harbor.
Heat Pump Installation in Gig Harbor
A heat pump installation in Gig Harbor almost always means sizing the unit for both heating and cooling, which matters in a marine climate where the shoulder seasons are long and mild. We walk through the Manual J load calculation, explain what size unit your home actually needs, and provide a written fixed price that includes the equipment, labor, duct modifications if needed, and all permit work. Heat Pump Installation in Gig Harbor is the page with full detail on equipment options and what to expect on install day.
Furnace Repair in Gig Harbor
Furnace problems in Gig Harbor tend to follow the season: first-cold-snap ignition failures, flame sensor issues, and blower motors that have sat idle since spring. We stock parts for all nine major brands on our trucks, so most furnace repairs are completed same-day. The repair price is always in writing before we start, and if the same fault occurs within a year, the return visit is free. For the complete rundown on Furnace Repair in Gig Harbor, including typical part costs, that page covers it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Gig Harbor
Our technicians are factory-trained to service nine major residential HVAC brands, including Rheem, York, Daikin, and Bryant. The most common parts for these systems are stocked on our trucks, which keeps turnaround tight when a Gig Harbor home loses heat mid-winter or AC during a warm spell. For the full brand list, see our brands.
Pricing for HVAC Company in Gig Harbor, WA
| Service | Typical range in Gig Harbor |
|---|---|
| AC repair (minor: capacitor, contactor, fan motor) | $150 – $350 |
| AC repair (major: compressor, coil, refrigerant leak repair) | $350 – $650 |
| Furnace repair (minor: flame sensor, ignitor, thermocouple) | $150 – $350 |
| Furnace repair (major: blower motor, gas valve, heat exchanger) | $350 – $700 |
| AC installation (new system, standard efficiency) | $3,500 – $5,500 |
| AC installation (high-efficiency or larger capacity) | $5,500 – $7,500 |
| Tune-up (single system, includes inspection and written report) | $80 – $200 |
What pushes a Gig Harbor quote toward the upper end of these ranges is the age of the home and the condition of existing ductwork. A 1970s split-level with original ducts and a 30-year-old furnace will cost more to bring up to standard than a 10-year-old system that simply needs a part swapped. Regardless, every job gets a written price before any work starts, so you know the number you are approving is the number you pay.
Neighborhoods We Serve in Gig Harbor
We work throughout Gig Harbor and the surrounding unincorporated areas, including:
- Downtown and waterfront along Harborview Drive
- Peacock Hill and the neighborhoods north of Borgen Boulevard
- Artondale and Crescent Valley
- The west side along Rosedale Street NW
- North Gig Harbor and the areas along Sehmel Drive
Our typical response time across Gig Harbor is same-day for repair calls placed before early afternoon, with emergency dispatch available around the clock.
Service Area – Cities Near Gig Harbor
Beyond Gig Harbor, Dalton Heating & Air serves nearby communities on the Key Peninsula and across the bridges, including Wauna, WA, Fox Island, WA, Vashon, WA, and Port Orchard, WA. Scheduling is coordinated through our Seattle metro office, and crews are dispatched locally to Gig Harbor and the surrounding areas.
Serving Gig Harbor, WA - Our Local Coverage Area
We’re based in the Gig Harbor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Gig Harbor
Most repair calls in Gig Harbor are scheduled same-day if you call before early afternoon. For no-heat or no-cooling emergencies, our emergency dispatch runs 24/7, and a live person answers at (361) 306-9515, so you do not wait on a call-back.
Most HVAC replacements in Gig Harbor require a mechanical permit through the City of Gig Harbor or Pierce County, depending on whether the home is inside city limits. We pull the permit as part of the installation, including any HOA review steps where they apply.
Yes. Our crews regularly work in the waterfront neighborhoods and newer planned communities around Gig Harbor, including coordinating access with HOA gates and scheduling dock or narrow-lot deliveries. The written price includes any additional coordination work, so there is no surprise line item at the end.
If your heating or cooling system is down, or you are ready to price a replacement, call Dalton Heating & Air at (361) 306-9515 for a free estimate. A live person answers, and the price is in writing before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gig Harbor Customers Say
"Good communication, tidy, and disciplined work. Taped off the floor and wiped the unit down."
- Karen J."Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B."Tech arrived in uniform right on time. AC wasn't cooling, found a failed capacitor, and replaced it in twenty minutes. The owner is a veteran and the company runs like it."
- Frank O.