Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Union City
Furnace repair in Union City runs $150 – $700 for most jobs, and we get to your door fast because our Union City dispatch is local to the Bay Area. A no-heat call on a cold January night along Mission Boulevard deserves a tech who shows up inside the stated window, puts the price in writing before touching the unit, and finishes the job that day. That’s how we work. Call (361) 306-9515 any hour and a live person answers, not a voicemail queue.
We know Union City’s housing stock: mid-century ranchers in Decoto, newer builds near Union Landing, and a lot of furnaces tucked into hall closets or garage corners. The homes differ. The discipline of the repair doesn’t. You get a background-checked, uniformed tech who explains what failed, what it costs to fix, and whether fixing it is actually the right answer.
Why Dalton Heating & Air Is Union City’s Preferred Furnace Repair Company
Dalton Heating & Air has been a Garrison Partners company since 2003, and every job in Union City runs on The Garrison Standard: arrive inside the window, price in writing before any work starts, repair by the book, leave the site clean, and back the work for a full year. It’s not a slogan. It’s a set of rules our techs are held to on every call, from a capacitor swap near Alvarado-Niles Road to a full blower motor replacement in the Seven Hills area.
Marco Benitez leads our team and holds every tech to the same non-negotiable terms: a written guarantee on every repair, a free return visit if the repair fails within the year, and a written price before the first tool comes out of the bag. Homeowners in Union City tell us the same thing after we finish: the furnace works, the price matched the quote, and the area around the unit was cleaner than when we arrived.
We also answer the phone. A live person takes your call at 2 a.m. when the furnace quits and the house is dropping into the 40s. You won’t get a callback window or a voicemail. You’ll get a straight answer and a tech dispatched to Union City the same day.
Emergency Furnace Repair in Union City
Emergency Furnace Repair in Union City means no heat on a cold night, usually discovered when someone wakes up shivering in a house in the Decoto district or hears the furnace cycling without producing warm air. The most common emergency calls we get: high-limit switch trips, cracked heat exchangers, failed ignitors, and blower motors that have seized. A no-heat furnace is a genuine health issue when overnight lows hit the mid-40s and the house won’t hold temperature. We treat it that way.
Emergency calls don’t cost extra. Furnace repair is $150 – $700 whether we’re out at 2 p.m. or 2 a.m. The price is in writing before work starts, and the repair carries the same 365-Day Done Right Promise as any job we do. If it fails inside that year, we come back at no charge.
Ignitor Replacement on a Same-Day Call
An ignitor is the small ceramic part that glows to light the burner. When it cracks, the furnace won’t fire. We carry ignitors for Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard furnaces on our trucks, so most Union City calls are one visit. A typical ignitor replacement runs $150 – $300.
High-Limit Switch Trips and What They Mean
If your furnace lights, runs three to five minutes, and shuts down, that’s often a high-limit switch doing its job: shutting the unit down because the heat exchanger is getting too hot. The cause could be a dirty filter, a failing blower motor, a cracked heat exchanger, or a duct system that’s too small for the furnace. A tech needs to test combustion and airflow before swapping parts, or the new switch will just trip again.
Furnace Maintenance in Union City
Furnace Maintenance in Union City matters more than in colder climates because our furnaces sit idle for stretches of mild weather. Moisture settles, dust accumulates, and parts corrode without ever wearing out from use. A tune-up runs $80 – $200 and catches the failure modes that Union City’s climate creates: a weak capacitor on the blower motor, a heat exchanger that’s developing small cracks, a burner that’s running rich. If you wait until there’s no heat, the repair bill is always bigger.
Our maintenance visits are flat-priced. The tech performs a combustion test, checks the capacitor and amperage draw, inspects the heat exchanger, cleans the flame sensor, and writes up what was found. What they don’t do is sell you a repair you don’t need. Our techs are paid on work performed, not on what they sell.
What a Load Calculation Changes
If your furnace was sized by a previous owner’s guess, it may be cycling constantly or short-cycling. Both kill equipment early. A proper load calculation measures your home’s square footage, window area, insulation levels, and duct layout to confirm the furnace is actually the right size for the house. It’s a five-digit calculation, not a rule of thumb, and it tells us whether the repair you’re about to pay for is wise or whether it’s money into a unit that was never right for your home.
Idle-Season Corrosion and Why It Shows Up in Repairs
Union City’s winters hover in the mid-40s, which means furnaces go unused for long stretches between cold snaps. During those idle weeks, moisture settles on the heat exchanger and dust collects on the blower wheel. The result: corrosion and seizure that has nothing to do with wear and everything to do with time spent off. A furnace that tests fine on combustion in October can show a cracked heat exchanger by January.
Trusted Brands We Service in Union City
We’re factory-trained to service nine major residential furnace brands, including Trane, Lennox, Goodman, and Rheem. That matters because a Trane heat exchanger and a Goodman gas valve don’t fail the same way, and the fix isn’t generic. Our trucks carry common parts for these brands so a repair in Union City doesn’t stretch into two or three visits while someone orders a part from a warehouse across the Bay.
Common Furnace Repair Problems We See in Union City Homes
- Cracked heat exchangers from idle-season corrosion. Mild winters mean furnaces sit unused, and moisture plus dust does more damage than heavy use. We find small cracks that never would have developed in a colder climate.
- High-limit switch trips on the wrong-sized furnace. Many Union City homes have furnaces that were never properly sized. Without a load calculation, the unit cycles too much, overheats, and trips the limit switch until a part finally fails.
- Weak blower motor capacitors. A five-minute capacitor test catches a failing motor before it burns out entirely, but most homeowners don’t call until the house is cold and the motor has already seized.
- Faulty gas valves on older units. An 18-year-old Carrier or Rheem furnace in a Union City home often has a gas valve that’s corroded or fails to open reliably. The symptom is a furnace that won’t light, or lights intermittently.
Pricing for Furnace Repair in Union City, CA
Let’s get specific about what furnace repair actually costs in Union City. Here are the ranges we quote:
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Repair (after-hours emergency) | $150 – $700 |
| Tune-Up | $80 – $200 |
Most repairs land between $150 and $450. The higher end of the range, $500 – $700, is for a blower motor replacement or a gas valve on a furnace that’s harder to access. You get a written price before any work begins, every time, and that price doesn’t move at the door. Estimate are free. Call (361) 306-9515 and we’ll tell you what a repair on your specific unit should cost before we ever arrive.
We Also Serve Cities Near Union City
Our Furnace Repair team covers Union City and the surrounding East Bay communities. If you live in Fremont, Newark, San Lorenzo, or Castro Valley, we’re already in your neighborhood. The same written pricing, same guarantee, and same live-person phone support at (361) 306-9515 apply anywhere we work.
Serving Union City, CA - Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Union City
It depends on what’s causing the shutdown. A dirty flame sensor or weak capacitor is a $150 – $350 repair. A cracked heat exchanger on an 18-year-old unit is often a sign that replacement is the better call. The only way to know is a combustion test and a visual inspection of the heat exchanger. Call (361) 306-9515 and we’ll tell you the cost of fixing it before you decide whether fixing makes sense.
Because idle time is harder on a furnace than cold weather. When the unit sits unused for weeks in Union City’s mid-40s winters, moisture corrodes the heat exchanger and dust settles in the blower motor. The parts that fail first aren’t the ones that wear out from use; they’re the ones that degrade from sitting. A tune-up before winter, $80 – $200, catches most of these failures before they become a no-heat call.
Not for a simple repair, but it’s essential before any replacement. A load calculation tells us the correct furnace size for your specific Union City home, based on square footage, insulation, window area, and duct layout. Without it, you’re guessing. Guessing leads to short-cycling furnaces that trip high-limit switches and fail early. We include the calculation on any replacement quote.
Most furnace repairs in Union City run $150 – $450, with more involved jobs like a blower motor replacement reaching $500 – $700. Tune-ups are $80 – $200. You’ll get a written price before work starts, and the repair is guaranteed in writing for a full year. Call (361) 306-9515 for a free estimate.
SEER2 is an efficiency rating for cooling, but when a furnace is paired with a heat pump or air handler, the system’s combined efficiency rating matters. If your repair is on a 20-year-old furnace paired with an old cooling coil, the honest answer may be that fixing the furnace isn’t the right long-term investment. We’ll show you the efficiency numbers and what they mean on your actual utility bill before you decide.
If your furnace is down and you need a straight answer, call (361) 306-9515. We answer live, we show up inside the window, and the price is in writing before we touch the unit.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Union City and the surrounding East Bay.