Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Seville
When your furnace quits on a January morning in Seville, you need a repair crew that shows up inside the window, puts the price in writing before touching a screwdriver, and stands behind the work for a full year. That’s the job we do. Most Furnace Repair calls in Seville run $150 – $700 depending on the part, and we keep the trucks loaded with the ignitors, gas valves, blower motors, and capacitors that fail most often in Medina County furnaces. Call us at (361) 306-9515 and you’ll reach a live person, not a voicemail queue.
We know the difference between a 15-year-old Rheem that needs a $300 gas valve and a 25-year-old York that needs a heat exchanger and a hard conversation. Nobody gets pressured into a replacement. You get the truth, in writing, and a repair guaranteed for 365 days.
Why Dalton Heating & Air Is Seville’s Preferred Furnace Repair Company
We’re a Garrison Partners company, operating under The Garrison Standard since 2003. Here’s what that means in plain terms: every job gets a written price before any work starts, every repair carries a written guarantee, and if the repair fails inside that guarantee period, we come back at no charge. No fine print, no upgrade pitch, no “we’ll see when we get there” pricing. Marco Benitez runs this operation, and he expects every tech on a Seville call to follow The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Our technicians are background-checked and uniformed. You know who’s coming before they knock. And since Seville sits in a pocket of Medina County where winter design temperatures hover around 5°F, we’re not guessing at what a failed furnace means in your house. We see the same thing you see: a house that won’t hold 68°F, a burner that fires and quits, a blower that won’t ramp. We’ve repaired hundreds of furnaces in the area, and we’ve done it enough to know which problems are simple and which ones need a real conversation about repair versus replace-or whether our Heat Pump Installation in Seville might be the smarter long-term move.
Every phone call to Dalton Heating & Air is answered by a person, 24/7. No call center script, no “we’ll call you back in 48 hours.” If it’s 2 a.m. and your furnace is down during a Seville cold snap, a person picks up.
Boiler Repair in Seville
Boiler Repair in Seville often comes down to a circulator pump that’s worn out, a pressure relief valve that’s dripping, or a zone valve that won’t open. Homes in and around Seville with hydronic heat have an advantage: quiet, even heating. The tradeoff is that when a boiler quits, it’s usually not a part you can diagnose from a YouTube video. We open the boiler, check the expansion tank pressure, confirm the ignition system, and we put the diagnosis in writing before any work begins. Boiler repair in Seville typically runs $150 – $700, same as furnace repair, because the parts cost is what drives the bill.
Pump and zone valve failures
A boiler with good combustion but no heat moving through the pipes usually has a dead circulator pump or a stuck zone valve. We carry common pump and valve replacements on the truck so most Seville boiler repairs are same-visit jobs, not a parts-order-and-return.
Low water pressure and relief valve leaks
If your boiler’s pressure gauge sits below 12 psi, or the relief valve is spitting water, that’s a closed-system problem, not a boiler problem. We check the expansion tank and fill valve before quoting anything else, because replacing the boiler without fixing the pressure source just burns your money twice.
Gas Furnace Repair in Seville
Gas Furnace Repair in Seville usually starts with a furnace that fires, runs a few minutes, and shuts off before the house hits temperature. That’s not a furnace problem in most cases, it’s a dirty flame sensor. The sensor gets coated with carbon over a heating season, the burner reads it as a false signal, and the control board kills the gas. It’s a $150 – $300 repair, and it’s the single most common no-heat call we run in zip code 44273. Other times it’s a failed ignitor, a gas valve that won’t open, or a blower motor that’s pulling too many amps against a dirty coil.
Flame sensor and ignitor service
When the furnace clicks but won’t light, or lights and drops out, the flame sensor or ignitor is the likely culprit. We clean the sensor or replace the ignitor, verify the flame signal, and give you the part in hand with the repair ticket. A proper diagnosis takes about an hour in most Seville homes.
Gas valve and control board work
A gas valve that won’t hold pressure or a control board that throws fault codes is not a job to guess at. We test the circuit, confirm gas pressure at the manifold, and replace the failed component with a factory or equivalent part tested before we leave. You get the old part and a written guarantee.
Trusted Brands We Service in Seville
Dalton Heating & Air is factory-trained to service nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We work on Goodman and York furnaces all over Seville, plus Carrier and Rheem systems that have been running since the original build. That matters because we can get manufacturer-specific parts fast, not wait for a dealership-style supply house order. If your Seville furnace is a 15-year-old Goodman or a 20-year-old Rheem, we likely have the ignitor, capacitor, or pressure switch it needs on the truck. No week-long parts waits.
Common Furnace Repair Problems We See in Seville Homes
- Cracked heat exchangers in older Carrier, Trane, and Lennox furnaces. Seville’s 5°F design mornings force furnaces to cycle hard, and 18-to-25-year-old heat exchangers crack under that repeated expansion and contraction. A cracked heat exchanger is a carbon monoxide risk, so we shut the furnace down, show you the crack with a camera scope, and talk honestly about repair versus replacement.
- Short-cycling from oversized furnaces installed without a load calculation. A furnace that’s too big for the house heats the air fast, shuts off, fires again, and wears out blower motors and heat exchangers years early. We see this in Seville homes where a previous contractor used a rule of thumb instead of a Manual J load calculation.
- Failed ignitors, flame sensors, and capacitors on Goodman and York units. A weak capacitor or a dirty flame sensor gets misread as a dead furnace every week in this area. We test the part before condemning it, because a $20 capacitor shouldn’t turn into a $2,500 replacement pitch.
- Blower motors pulling high amps against dirty evaporator coils. The blower has to work harder when the coil is choked with dust and pet hair, and it burns out faster. In Seville’s older homes, this is a regular no-heat culprit. We check static pressure and coil condition before replacing a motor that might just need airflow restored.
Pricing for Furnace Repair in Seville, OH
Here’s the honest range for Seville: most furnace repairs land between $150 and $700, and the difference is the part, not the labor. A flame sensor cleaning or ignitor replacement usually falls at the low end. A gas valve, blower motor, or control board replacement lands at the high end. A furnace tune-up runs $80 – $200 and includes a written report of what we found, not a sales script. You get the price in writing before we start, on every job, without exception. If the repair fails inside a year, we return and make it right at no charge. Call (361) 306-9515 for a free estimate.
| Service | Price Range in Seville |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
What drives the cost is which part failed. A $300 gas valve and a $75 ignitor are different jobs. We’ll tell you which one you have before you spend a dollar.
We Also Serve Cities Near Seville
Our crews cover Seville and the surrounding Medina County area, including Furnace Repair calls in Rittman, Wadsworth, Medina, and Lodi. If you’re a few minutes outside Seville, the same written pricing, on-time arrival, and one-year guarantee apply. Call and we’ll get a truck headed your way.
Serving Seville, OH - Our Local Coverage Area
We’re based in the Seville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Seville
At 20 years old, if the heat exchanger is cracked, replace it. If the problem is a $200 ignitor or a $300 gas valve and the heat exchanger is solid, repair it and run it. We’ll scope the heat exchanger and show you what we see before we recommend anything, and the decision is yours, in writing, with real numbers for both options.
Usually it’s an oversized furnace short-cycling, a blower motor not moving enough air, or duct leakage in a basement or attic. Seville homes built with older duct systems often lose 20 – 30% of conditioned air to leaks before it reaches the register. We check static pressure and duct condition as part of the diagnosis, not as an add-on pitch.
Most furnace repairs in Seville run $150 – $700. The low end covers ignitors, flame sensors, and minor electrical fixes. The high end covers gas valves, blower motors, and control boards. You’ll get an exact number in writing before any work starts, and a full-year guarantee on the repair. Call (361) 306-9515 for a free estimate.
New furnaces are rated under the 2023 DOE efficiency metrics, which use a stricter testing method than the old AFUE label. A new 95% furnace under the current standard may deliver slightly less real-world efficiency than an old 95 AFUE unit did on paper. We’ll show you the correct comparison for your old unit and explain what the efficiency number means on a Seville heating bill, not just on a sticker.
Yes. Most Seville boiler issues are repairable: circulator pumps, zone valves, expansion tanks, relief valves, and ignition components. We’ll diagnose the exact failure and give you a written repair price. Replacement only comes up when the heat exchanger itself is leaking, which is a different conversation.
If your furnace is down in Seville, call (361) 306-9515. You’ll get a live person, a real appointment, and a written price before any work begins. That’s the standard we work to, on every job, in every Seville home.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Seville, OH and the surrounding Medina County area.