Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Olmos Park
Furnace repair in Olmos Park, TX typically runs $150 – $700 depending on the failed part, and most calls are handled same-day. We work on the 1920s bungalows off East Contour Drive, the mid-century ranches west of New Braunfels Avenue, and everything in between. If your heat is out tonight, call (361) 306-9515 and you’ll get a real person on the line, not a voicemail queue.
We know the heating systems in Olmos Park because we’ve worked on hundreds of them. The furnaces here sit in homes built before central air was standard, which means the ductwork often fights the equipment. That’s not a knock on your house. It’s a fact of the housing stock, and it changes how we diagnose a furnace problem versus how we’d approach the same call in a newer subdivision. When our tech pulls up to a 1950s ranch near Olmos Park Drive, he’s already thinking about return air size and static pressure before he even opens the furnace cabinet.
The Garrison Standard has governed how we operate since 2003. That means a written price before any work starts, a written guarantee on every repair for a full year, and a free return visit if the repair doesn’t hold. Those aren’t upgrades. They’re the terms of every service call we run in Olmos Park.
Why Dalton Heating & Air Is Olmos Park’s Preferred Furnace Repair Company
Homeowners in Olmos Park call us because they’re done with technicians who quote one number on the phone and a different one at the door. We put the price in writing before any work begins, on every job, without exception. That’s not a sales tactic. It’s The Garrison Code, and every Dalton Heating & Air tech is bound to it: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
Our technicians are background-checked and uniformed, and you’ll know who’s coming before they arrive. They’re factory-trained to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That matters in Olmos Park because the furnace in a 1930s bungalow might be a Goodman someone installed in 2009, while the house two streets over has an original mid-century Lennox that’s been patched together for decades. We service both ends of that spectrum.
Marco Benitez leads our team, and he holds every tech to The Garrison Standard on every call. That’s why Olmos Park customers get a 365-Day Done Right Promise on repairs: if it’s not done right, we make it right. No fine print, no prorated coverage. A full year, in writing.
Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, while crews serve Olmos Park and the surrounding communities locally. That structure means someone answers the phone at 2 a.m. when your furnace dies in a January cold snap, and a tech still shows up to your street knowing the homes and the systems in them.
Furnace Maintenance in Olmos Park
Furnace maintenance in Olmos Park is a flat $80 – $200 visit that catches the failures this housing stock is known for before they strand you without heat on a 35-degree night. We check the heat exchanger for cracks, test the blower motor’s amp draw against the ductwork’s static pressure, clean the flame sensor, and verify the gas valve is opening and closing correctly. In Olmos Park specifically, the tune-up also includes a hard look at whether your return air is big enough for the equipment it’s feeding. Homes from the 1940s and 1950s were ducted for heating-only systems, and when someone added air conditioning later, they rarely enlarged the returns. That mismatch shortens blower motor life and trips limit switches long before anything actually breaks.
What a Tune-Up Actually Prevents
A cracked heat exchanger is a carbon monoxide risk, and it’s also the most expensive furnace repair you’ll face. We catch it during maintenance when the crack is small and the fix is a heat exchanger repair, not a full replacement. A dirty flame sensor, by contrast, is a $150 repair that causes a furnace to light, run three minutes, and shut off, which in Olmos Park is the most common “I think my furnace is broken” call during the first cold snap of fall.
Written Report, Honest Findings
Every tune-up ends with a written report of what we found, what the measurements mean, and what actually needs attention now. Our technicians are not paid on what they sell, so the report tells you what’s failing and what’s fine. If the heat exchanger is intact and the blower motor is within spec, we tell you to run it another year.
Heat Pump Repair in Olmos Park
Heat pump repair in Olmos Park runs $150 – $650 and is often the actual fix when homeowners call us for a furnace problem. Many older Olmos Park homes have been retrofitted with hybrid or dual-fuel setups: a heat pump for mild weather, a gas furnace as backup. When the heat pump won’t defrost or its reversing valve sticks, the furnace kicks on more than it should, and the utility bill climbs. The homeowner feels heat and assumes the furnace is failing, when the real issue is a refrigerant charge or a failed capacitor on the heat pump side.
Diagnosing the Actual Problem
We check the whole system before we sell a part. That means measuring the refrigerant pressures on the heat pump, testing the reversing valve, and watching how the thermostat stages the aux heat. In Olmos Park, where many of these dual-fuel retrofits were installed across varying homes, the problem is frequently the crossover wiring between systems, not the furnace itself.
What Heat Pump Repair Costs Here
A failed capacitor is a $150 – $250 fix. A low refrigerant charge that needs leak detection and a full recharge might run $300 – $550. A reversing valve replacement is more involved and lands in the $450 – $650 range. We give you the exact number in writing before any work begins, and the repair carries the same full-year written guarantee as everything else we do.
Trusted Brands We Service in Olmos Park
Dalton Heating & Air is factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We stock common repair parts for Trane, Goodman, and Rheem furnaces in our mobile inventory, which means a blower motor or ignitor replacement in Olmos Park usually happens same-visit rather than “we’ll order it and come back next week.” When a heat exchanger fails on an older Lennox or Carrier, we walk you through replacement cost versus furnace replacement with real numbers, not a sales script. The goal is a furnace that heats your home and doesn’t trip a limit switch again next winter.
Common Furnace Repair Problems We See in Olmos Park Homes
- Static pressure and undersized returns. Homes west of New Braunfels Avenue built from the 1940s through the 1950s were ducted for heating-only airflow. When a modern blower motor pulls against those undersized returns, the amp draw climbs and the limit switch trips long before the furnace makes reliable heat.
- Short cycling from original windows and attics. Single-pane windows and uninsulated attics on Alamo Heights-adjacent bungalows let heat escape fast, so the furnace short cycles. That rapid on-off stress cracks heat exchangers and throws off thermostat calibration.
- Hybrid heat pump confusion. Dual-fuel setups make homeowners think the furnace is failing when the heat pump isn’t defrosting or the aux heat is carrying the full load. We check both systems before quoting a repair.
- Heat exchanger cracks in aging equipment. The 20-to-30-year-old furnaces in Olmos Park’s original housing stock carry a real carbon monoxide risk when the heat exchanger cracks. We test for it on every call, because in a house this age, silence on that point is negligence.
Pricing for Furnace Repair in Olmos Park, TX
| Service | Typical Range in Olmos Park |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
| AC Repair | $150 – $650 |
Most furnace repairs in Olmos Park fall between $150 and $450. A flame sensor or ignitor replacement sits at the low end. A gas valve or induced draft motor lands in the middle. A heat exchanger repair pushes toward the $700 mark, and at that point, we’ll show you the repair cost next to a replacement quote so you can decide with numbers on paper, not pressure on the phone. Every estimate is free, and every price is in writing before any work begins.
Call (361) 306-9515 for an exact quote on your furnace. Marco Benitez and the team will give you the real number up front.
We Also Serve Cities Near Olmos Park
Beyond Olmos Park, our crews handle furnace repair and heat pump service for homeowners in Houston, San Antonio, Dallas, and Fort Worth. If you’re just outside Olmos Park and still need the same written pricing and full-year guarantee, our Furnace Repair team covers the whole region. For details specific to your streets, see our Furnace Repair in Olmos Park page.
Serving Olmos Park, TX - Our Local Coverage Area
We’re based in the Olmos Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Olmos Park
A furnace that lights and then shuts off after a few minutes is usually a $150 – $200 repair, not a replacement. The most common causes in Olmos Park are a dirty flame sensor, an undersized return duct driving the blower motor into high amp draw and tripping the limit switch, or a bad limit switch itself. We test the heat exchanger before we tell you it’s a simple fix, because a cracked heat exchanger can produce the same symptom. Call (361) 306-9515 and we’ll diagnose it on-site.
Yes, and this is where many Olmos Park replacements go wrong. Most of the pre-1960 homes here were repeatedly “upsized” by contractors who guessed instead of measuring, so the existing furnace is often oversized for the tightened envelope. A proper Manual J load calculation tells us exactly what the house needs after insulation and window upgrades. We run it on every furnace replacement in Olmos Park, because right-sizing is what actually stops the short cycling and heat exchanger failures.
SEER2 is a more honest test of real-world efficiency, and for an Olmos Park home with original single-pane windows and an uninsulated attic, it changes the math on your actual utility bill. A SEER2-rated heat pump or air conditioner will carry more of the heating load during mild San Antonio winters, which means your gas furnace runs less and your electricity use drops during the shoulder months. The dollar impact depends on your ductwork and envelope, which is why we tie the efficiency discussion to a static pressure test and a load calculation, not a brochure number.
We treat a no-heat call in Olmos Park as a same-day priority, and in winter cold snaps we run dedicated heating crews from early morning into the evening. Our dispatch is staffed by a live person 24/7, so when you call (361) 306-9515 at 6 a.m. because the house is 54 degrees, you reach a human who can send a tech to you directly. There’s no overtime charge for emergency service.
Yes, our techs are cross-trained on both sides of a dual-fuel system, so a single visit to Olmos Park can cover the heat pump, the furnace, and the control wiring between them. That’s especially useful when the problem is the thermostat staging or the crossover wiring, which affects both systems at once. One diagnostic fee covers finding the real fault, and you get a written price before any repair on either unit begins.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Olmos Park with written pricing, full-year guarantees, and factory-trained furnace and heat pump repair since 2003.